[논문]Earth Pressure and Settlement Analysis of Trench Ducts Backfilled with Controlled Low Strength Materials

Li-Jeng, Huang; Her-Yung, Wang; Yeong-Nain, Sheen; Duc-Hien, Le

doi:10.1016/j.proeng.2016.02.029

Earth Pressure and Settlement Analysis of Trench Ducts Backfilled with Controlled Low Strength Materials 원문보기

Procedia engineering, v.142, 2016년, pp.174 - 181

Li-Jeng, Huang (Associate Professor, Department of Civil Engineering, National Kaohsiung University of Applied Science, 807, Taiwan, R.O.C.) , Her-Yung, Wang (Professor, Department of Civil Engineering, National Kaohsiung University of Applied Science, 807, Taiwan, R.O.C.) , Yeong-Nain, Sheen (Professor, Department of Civil Engineering, National Kaohsiung University of Applied Science, 807, Taiwan, R.O.C.) , Duc-Hien, Le (Lecturer, Dept of Civil Engineering, Ton Duc Thang University, Ho Chi Minh City, Vietnam)

Abstract ▼ AI-Helper

Abstract Recently trench ducts for allocating conveying pipes for various hydraulic or electric lines are tremendously constructed due to rapid growth of life and communication demand. Graded sands and concrete are usually in conventional excavation and backfill operation. Controlled low-strength material (CLSM) has been proposed as a suitable substitute for this construction. However, exact and reliable analysis is required to assure the stress and settlement limitation. This paper presents static analysis of trench duct backfilled with sustainable materials and conventional materials using boundary element (BE) method. The Young's moduli of CLSM are obtained from laboratory tests for two different binder mixtures, CLSM B-130/30% and CLSM B-8-/30%, respectively. Two-dimensional planar strain is employed in the BE formulation of static analysis and comparison study of 4 kinds of backfill materials, i.e., graded sand, CLSM B130-30%, CLSM B130-80%, and concrete. Emphasis is put on the lateral pressure on the side wall, settlement at the top of trench duct, vertical displacement along the centerline of duct and top of pipe cover, induced by three wheel surcharges: concentrated, strip and uniform lane loads. Convergence tests of BEM results are first conducted. Numerical results show that the settlement and lateral pressure of CLSM backfills are acceptable to assure the applicability of CLSM as a suitable sustainable material employed for trench duct design and backfill construction.

주제어

참고문헌 (14)

C. B. Earle, III, D.A. Victor D. , Underground Power Cable Considerations: Alternatives to Overhead, 47th Minnesota Power Systems Conference (MIPSYCON), 1-3 November 2011, Brooklyn Center, Minnesota, 2011, pp. 1-10.
T. Shakhzod, M. Khalid, P. Nicolas, F. Eric, Numerical Analysis and Full-Scale Tests of Concrete Underground Ductbanks for Assessment of their Seismic Vulnerability, Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal, 30 June - 2 July 2014, pp.289-296.
J. Deng, D.S. Gu, X.B. Li, H.S. Peng, Energy Method and Numerical Simulation of Critical Backfill Height in Non-Pillar Continuous Mining, Trans. NonferrousMet.Soc., China, 9 (1999) 847-851., Dec.1999.
M.S. Karimi, A. Arbabi, A. Haddad, E. Maroofi, Numerical Modeling of Uplift Resistance of Buried Concrete Ducts & Pipes, 3rd International Conference on Concrete & Development, 27-29 Apr, 2009, pp. 939-948.
Brebbia, C.A., Walker, S., Boundary Element Techniques in Engineering, Newnes-Butterworths, 1980.
ACI-229R, Controlled Low-Strength Materials (Reproved 2005), Farmington Hills (MI) 2005.
10.1061/9780784412688.043 A. Howard, M. Gaughan, S. Hattan, M. Wilkerson, Lean, Green, and Mean: The IPL Project. ICSDEC 2012: American Society of Civil Engineers, (2012) 359-366.
10.4028/www.scientific.net/AMM.597.345 Y. N. Sheen, L.J. Huang, D.H. Le, Engineering properties of controlled low-strength material made with residual soil and Class F fly ash, 3rd International Conference for Advanced Materials Design and Mechanics and Workshop on Android Robotics, Paper No. 54, Singapore, May 23-24, 2014.

상세보기
Y. N. Sheen, D.H. Hsiao, L.J. Huang, D.H. Le, Stress-strain behavior of soil-based controlled low-strength material, the International Conference on Green Technology for Sustainable Development 2014, Ho Chi Minh, Viet Nam, October 30-31, 2014.
10.4028/www.scientific.net/AMM.597.349 L. J. Huang, Y.N. Sheen, D.H. Le, On the Multiple Linear Regression and Artificial Neural Networks for Strength Prediction of Soil-Based Controlled Low-Strength Material, 3rd International Conference for Advanced Materials Design and Mechanics and Workshop on Android Robotics, Singapore, May 23-24, 2014.

상세보기
L. J. Huang, Y.N. Sheen, D.H. Hsiao, D.H. Le, Quasi-steady analysis of excavation backfilled with soil-based controlled low-strength material using finite element and boundary element methods, the International Conference on Green Technology for Sustainable Development 2014, Ho Chi Minh, Viet Nam, October 30-31, 2014.
L. J. Huang, Y.N. Sheen, D.H. Le, D.H. Hsiao, Steady-state Elasto-dynamic Analysis of Excavation Backfilled with Soil-based Controlled Low-strength Material Using Finite Element and Boundary Element Methods, 2014 ACEAT, Paper No. 105, Osaka, Japan, Nov.15-17, 2014.
10.14455/ISEC.res.2015.59 L. J. Huang, Y.N. Sheen, D.H. Le, Numerical Analysis of Controlled Low Strength Material Bridge Abutments: Part-I: Static Analysis, ISEC-8, Paper No. Su-11, 2015.
10.14455/ISEC.res.2015.60 L. J. Huang, Y.N. Sheen, D.H. Le, Numerical Analysis of Controlled Low Strength Material Bridge Abutments: Part-II: Steady-State Elastodynamic Analysis, ISEC-8, Paper No. Su-11, 2015.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Earth Pressure and Settlement Analysis of Trench Ducts Backfilled with Controlled Low Strength Materials 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (14)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트