최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of precision engineering and manufacturing, v.17 no.3, 2016년, pp.371 - 377
Jang, Jin-Seok , Yoo, Wan-Suk , Kang, Hoon , Cho, Jung-Woo , Jeong, Myeong-Sik , Lee, Sang-Kon , Cho, Yong-Jae , Lee, Jae-Wook , Rostami, Jamal
Design technologies of a cutting head attachment for mechanical excavation works are studied for improving grinding efficiency. Similar to a hydraulic breaker, a cutting head attachment is attached to the front of an excavator. However, unlike the hydraulic breaker, which breaks rocks via repeated m...
KURC, “Meaning of Urban Regeneration,” http://wwwkourcorkr/ tb/jsp/intro/intro01jsp?lCnt=m1&mCnt=m1 (Accessed 16 FEB 2016)
Sandvik Construction 2016 Tunneling Equipment Sandvik Construction, “Tunneling Equipment,” http://construction. sandvikcom/products/tunneling-equipment/ (Accessed 16 FEB 2016)
Engineering Geology S. Kahraman 65 4 269 2002 10.1016/S0013-7952(01)00137-5 Kahraman, S., “Correlation of TBM and Drilling Machine Performances with Rock Brittleness,” Engineering Geology, Vol. 65, No. 4, pp. 269-283, 2002.
Int. J. Precis. Eng. Manuf. K.-B. Kwon 15 6 1063 2014 10.1007/s12541-014-0437-3 Kwon, K.-B., Song, C.-H., Park, J.-Y., Oh, J.-Y., Lee, J.-W., and Cho, J.-W., “Evaluation of Drilling Efficiency by Percussion Testing of a Drill Bit with New Button Arrangement,” Int. J. Precis. Eng. Manuf., Vol. 15, No. 6, pp. 1063-1068, 2014.
B. Asbury 2003 Proc. of the Annual Meeting of the Society for Mining Asbury, B., Dezeeuw, M., Cigla, M., Ozdemir, L., and Oak Creek, C., “Results of Practical Design Modifications for Respirable Dust Reduction on Continuous Miners in Underground Coal Mining,” Proc. of the Annual Meeting of the Society for Mining, Metallurgy and Exploration (SME), 2003.
N. Bilgin 815 2005 Proc. of the 31st ITA-AITES World Tunnel Congress Bilgin, N., Tumac, D., Feridunoglu, C., Karakas, A., and Akgul, M., “The Performance of a Roadheader in High Strength Rock Formations in KKSU Tunnel,” Proc. of the 31st ITA-AITES World Tunnel Congress, pp. 815-820, 2005.
N. Bilgin 455 1997 Proc. of World Tunnel Congress Bilgin, N., Kuzu, C., Eskikaya, S., and Zdemir, L., “Cutting Performance of Jack Hammers and Roadheaders in Istanbul Metro Drivages,” Proc. of World Tunnel Congress, pp. 455-460, 1997.
The Journal of the South African Institute of Mining and Metallurgy R. Goktan 105 4 257 2005 Goktan, R. and Gunes, N., “A Semi-Empirical Approach to Cutting Force Prediction for Point-Attack Picks,” The Journal of the South African Institute of Mining and Metallurgy, Vol. 105, No. 4, pp. 257-264, 2005.
Journal of Korean Tunnelling and Underground Space Association S. W. Choi 16 6 573 2014 10.9711/KTAJ.2014.16.6.573 Choi, S. W., Chang, S. H., Park, Y. T., and Lee, G. P., “Performance Estimation of Conical Picks with Slim Design by the Linear Cutting Test (I): Depending on Attack Angle Variation,” Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 573-584, 2014.
Journal of Korean Tunnelling and Underground Space Association S. W. Choi 16 6 585 2014 10.9711/KTAJ.2014.16.6.585 Choi, S. W., Chang, S. H., Park, Y. T., and Lee, G. P., “Performance Estimation of Conical Picks With Slim Design by the Linear Cutting Test (II): Depending on Skew Angle Variation,” Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 585-597, 2014.
K. Gao 43 2014 Fracture and Structural Integrity: Annals 2014 Gao, K., Du, C., Jiang, H., and Liu, S., “A Theoretical Model for Predicting the Peak Cutting Force of Conical Picks,” Fracture and Structural Integrity: Annals 2014, pp. 43-52, 2014.
Journal of Theoretical and Applied Information Technology K. Gao 46 2 785 2012 Gao, K., Du, C., Jiang, H., and Liu, S., “An Empirical Mathematic Model of Drums Cutting Torque,” Journal of Theoretical and Applied Information Technology, Vol. 46, No. 2, pp. 785-789, 2012.
B. Tiryaki 655 2001 Proc. of 17th International Mining Congress and Exhibition of Turkey Tiryaki, B., Ayhan, M., and Hekimoglu, O. Z., “A New Computer Program For Cutting Head Design of Roadheaders and Drum Shearers,” Proc. of 17th International Mining Congress and Exhibition of Turkey, pp. 655-662, 2001.
M. Cigla 2000 Proc. of SME Annual Meeting Cigla, M. and Ozdemir, L., “Computer Modeling for Improved Production of Mechanical Excavators,” Proc. of SME Annual Meeting, 2000.
P. E. Nikravesh 347 2016 Dialnet Nikravesh, P. E., “Computer-Aided Analysis of Mechanical Systems,” Dialnet, pp. 347-351, 2016.
FunctionBay, Inc. 2010 User’s Guide for RecurDyn FunctionBay, Inc., “User’s Guide for RecurDyn,” 2010.
Technometrics W. J. Hill 8 4 571 1966 10.2307/1266632 Hill, W. J. and Hunter, W. G., “A Review of Response Surface Methodology: A Literature Survey,” Technometrics, Vol. 8, No. 4, pp. 571-590, 1966.
Technometrics J. Sacks 31 1 41 1989 10.1080/00401706.1989.10488474 Sacks, J., Schiller, S. B., and Welch, W. J., “Designs for Computer Experiments,” Technometrics, Vol. 31, No. 1, pp. 41-47, 1989.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.