$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Sustainable design of rural roads with 2+1 road design: Levels of service and traffic flow performance

KSCE journal of civil engineering, v.20 no.3, 2016년, pp.1032 - 1039  

Choi, Jaisung ,  Kim, Youngrok ,  Bergh, Torsten ,  Kim, Sangyoup ,  Kim, Sungkyu

Abstract AI-Helper 아이콘AI-Helper

This paper provides research results of a study to assess the driver performance levels of a 2+1 road, a special type of road involving intermediate cross section that is applied where a four-lane roadway construction is unjustifiable and the use of a two-lane road design may not provide the desired...

참고문헌 (34)

  1. G. V. Alaix 2010 4th International Symposium on Highway Geometric Design Alaix, G. V. and Garcia, A. (2010). “Procedures to facilitate passing on conventional highways by means of simulation.” 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  2. A. R. Archilla 1996 Test and evaluation of the TWOPAS rural traffic simulation model Archilla, A. R. (1996). Test and evaluation of the TWOPAS rural traffic simulation model, Mclean, U.S. Department of Transportation, Federal Highway Administration. 

  3. T. Bergh 2000 Proceedings of the 4th International Symposium on Highway Capacity Bergh, T. and Carlsson, A. (2000). “2+1 Roads with and without cable barriers: speed performance.” Proceedings of the 4th International Symposium on Highway Capacity, Maui, Hawaii. 

  4. T. Bergh 2010 Proceeding of the 4th International Symposium on Highway Geometric Design Bergh, T. and Petersson, M. (2010). “Country report Sweden.” Proceeding of the 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  5. T. Bergh 2010 Proceeding of the 4th International Symposium on Highway Geometric Design Bergh, T. and Petersson, M. (2010). “Roadside area design-swedish and scandinavian experience.” Proceeding of the 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  6. T. Bergh 2005 Proceeding of the 3rd International Symposium on Highway Geometric Design Bergh, T., Carlsson, A., and Moberg, J. (2005). “2+1 roads with cable barriers -A swedish success story.” Proceeding of the 3rd International Symposium on Highway Geometric Design, Chicago. 

  7. Transportation Research Record: Journal of the Transportation Research Board M. A. Brewer 2223 34 2011 10.3141/2223-05 Brewer, M. A., Venglar, S. P., and Ding, L. (2011). “Operational characteristics of super 2 highways in Texas.” Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., No. 2223, pp. 34-42. 

  8. P. Bueno 2013 Transyt Working Paper (Research Series) Bueno, P., Vassallo, J., and Cheung, K. (2013). “Road infrastructure design for optimizing sustainability.” Transyt Working Paper (Research Series), Transport Research Centre, Politechnica. 

  9. A. Carlsson 2009 Evaluation of 2+1-roads with cable barrier Carlsson, A. (2009). Evaluation of 2+1-roads with cable barrier, VTI Rapport 636A. Linkoping, VTI. 

  10. Journal of Advanced Transportation J. Choi 47 239 2013 10.1002/atr.171 Choi, J., Tay, R., and Kim, S. (2013). “Effects of changing highway design speed.” Journal of Advanced Transportation, Vol. 47, pp. 239-246. 

  11. Canadian Journal of Civil Engineering J. Choi 40 6 528 2013 10.1139/cjce-2012-0051 Choi, J., Tay, R., and Kim, S. (2013). “Effects of preceeding geometric conditions on operating speed consistency of multilane highways.” Canadian Journal of Civil Engineering, Vol. 40, No. 6, pp. 528-536. 

  12. Journal of Korea Society of Transportation J. S. Choi 11 3 67 1993 Choi, J. S. (1993). “A method for the development of design guides for passing lanes on rural two-lane roads.” Journal of Korea Society of Transportation, Vol. 11, No. 3, pp.67-82. 

  13. Journal of Korea Society of Transportation J. S. Choi 14 2 173 1996 Choi, J. S. (1996). “Development of no-overtaking Model and Analysis of fundamentals of traffic flow Characteristics on Two-lane roads.” Journal of Korea Society of Transportation, Vol. 14, No. 2, pp. 173-189. 

  14. Derr, B. R. (2003). “Application of European 2+1 roadway designs.” NCHRP Research Result Digest, Journal of Transportation Research Board, No. 1934, Transportation Research Board of the National Academies, Washington, D.C. 

  15. Hoban, C. J. (1986). Planning and design of rural roads: Observations on a year in America, Research Report AAR No. 140, Australian Road Research Board. 

  16. T. E. Hofbauer 2010 Proceeding of the 4th International Symposium on Highway Geometric Design Hofbauer, T. E. (2010). “Country report: Update on geometric design activities in Austria.” Proceeding of the 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  17. International Journal of Urban Sciences S. Y. Kim 17 3 304 2013 10.1080/12265934.2013.825422 Kim, S. Y., Choi, J. S., and Kim, S. G. (2013). “Roadside walking environments and major factors affecting pedestrian level of service.” International Journal of Urban Sciences, Vol. 17, No. 3, pp. 304-315. 

  18. International Journal of Urban Sciences S. Y. Kim 16 1 99 2012 10.1080/12265934.2012.662588 Kim, S. Y., Choi, J. S., Kim, M. K., and Kim, S. G. (2012). “Determination of accident modification factors for the median bus lanes on urban Arterials.” International Journal of Urban Sciences, Vol. 16, No. 1, pp. 99-113. 

  19. Y. R. Kim 2013 Determination of the level of service for 2+1 Roads based on the percent time spent following Kim, Y. R. (2013). Determination of the level of service for 2+1 Roads based on the percent time spent following, PhD Thesis, University of Seoul, South Korea. 

  20. S.K. Lee 2010 4th International Symposium on Highway Geometric Design Lee, S.K., Kim, Y.R., Moon, J.P. and Choi, J.S. (2010). “Operational analysis of 2+1 roadway and its use in developing geometric design standards in South Korea.” 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  21. L. Leiman 1998 TWOPAS model improvements Leiman, L., Archilla, A. R., and May, A. D. (1998). TWOPAS model improvements, University of California Berkeley, California. 

  22. Transportation Research Record: Journal of the Transportation Research Board Ta.p.i.o. Luttinen R 1776 52 2001 10.3141/1776-07 Luttinen R. Tapio. (2001). “Percent Time-spent-following as performance measure for two-lane Highways.” Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., No. 1776, pp. 52-59. 

  23. MLTMA 2010 Design guideline for 2+1 road MLTMA (2010). Design guideline for 2+1 road, Ministry of Land, Transport and Maritime Affairs, Korea. 

  24. NRA 2006 Interim advice note on road link design for 2 plus 1 roads NRA (2006). Interim advice note on road link design for 2 plus 1 roads, National Roads Authority. 

  25. I. Sandle 2005 Proceeding of the 3rd International Symposium on Highway Geometric Design Sandle, I., Aspinall, B., Hasen, D., and Smart, J. (2005). “Wide single 2+1 Carriageways in the UK.” Proceeding of the 3rd International Symposium on Highway Geometric Design, Chicago. 

  26. J. Smart 2005 Proceeding of the 3rd International Symposium on Highway Geometric Design Smart, J. (2005). “Country report-united kingdom.” Proceeding of the 3rd International Symposium on Highway Geometric Design, Chicago. 

  27. J. Smart 2010 Proceeding of the 4th International Symposium on Highway Geometric Design Smart, J. (2010). “Country report-united kingdom.” Proceeding of the 4th International Symposium on Highway Geometric Design, Valencia, Spain. 

  28. P. Szagala 2005 Proceeding of the 3rd International Symposium on Highway Geometric Design Szagala, P. (2005). “Analysis of 2+1 Roadway Design Alternatives.” Proceeding of the 3rd International Symposium on Highway Geometric Design, Chicago. 

  29. TRB 2000 National research council: Highway capacity manual 2000 TRB (2000). National research council: Highway capacity manual 2000, Transportation Research Board, Washington, D.C. 

  30. TRB 2010 National research council: Highway capacity manual TRB (2010). National research council: Highway capacity manual, Transportation Research Board, Washington, D.C. 

  31. UK 2008 Part 4:Design of Wide Single 2+1 Roads UK (2008). “Design manual for roads and bridges.” Vol. 6: Road Geometry, Section 1. Part 4:Design of Wide Single 2+1 Roads, Highway Agency, Department for Transport, United Kingdom. 

  32. International Journal of Urban Sciences D. Van 18 2 186 2014 10.1080/12265934.2014.929021 Van, D., Kortmann, R., and Van, S. L. (2014). “City logistics through the canals? a simulation study on freight waterborne transport in the inner-city of Amsterdam.” International Journal of Urban Sciences, Vol. 18, No. 2, pp. 186-200. 

  33. R. Weber 2005 3rd International Symposium on Highway Geometric Design Weber, R. (2005). “Traffic safety and traffic flow on 2+1 routes carrying mixed traffic.” 3rd International Symposium on Highway Geometric Design, Chicago. 

  34. M. Wiklund 2015 Transportmetrica A: Transport Science Wiklund, M., Carlsson, A., Eriksson, O., Olstam, J. and Tapani, A. (2015). “Effects of desired speeds for queuing and delay on single lane road segments.” Transportmetrica A: Transport Science, DOI: 10.1080/23249935.2015.1066462 (On-line published). 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로