최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Tribology international, v.99, 2016년, pp.85 - 95
Bian, G. , Wu, H.
We have examined friction surface structure of a carbon ceramic brake disc tested on a full-scale dynamometer with microscopy techniques. The bedded friction surface is composed of two types of regions: transferred materials (TM) and SiC. The TM regions were formed through the deposition of wear deb...
Tribol Int Choa 36 537 2003 10.1016/S0301-679X(02)00260-8 Tribological study of grey cast iron with automotive brake linings: the effect of rotor microstructure
Wear Libsch 46 203 1978 10.1016/0043-1648(78)90121-7 Microstructural changes in semimetallic disc brake pads created by low temperature dynamometer testing
Wear Rhee 2 271 1973 10.1016/0043-1648(73)90092-6 The friction surface of grey cast iron brake rotors
Wear Rhee 146 89 1991 10.1016/0043-1648(91)90226-K The role of friction film in friction, wear and noise of automotive brakes
Wear Wirth 179 75 1994 10.1016/0043-1648(94)90222-4 A fundamental tribochemical study of the third body layer formed during automotive friction braking
Tribol Int Eriksson 33 817 2000 10.1016/S0301-679X(00)00127-4 Tribological surfaces of organic brake pads
Wear Osterle 267 781 2009 10.1016/j.wear.2008.11.023 A comprehensive microscopic study of third body formation at interface between a brake pad and brake disc during the final stage of a pin-in-disc test
Tribol Int Dmitriev 41 1 2008 10.1016/j.triboint.2007.04.001 Numerical simulation of typical contact situations of brake friction materials
Tribol Int Dmitriev 43 719 2010 10.1016/j.triboint.2009.10.012 Modelling of brake pad-disc interface with emphasis to dynamics and deformation of structures
JSAW Rev Nakanishi 23 365 2002 10.1016/S0389-4304(02)00203-5 Development of aluminium metal matrix composites (Al-MMC) brake rotor and pad
Tribol Int Bian 92 1 2015 10.1016/j.triboint.2015.05.023 Friction performance of carbon/silicon carbide ceramic composite brakes in ambient air and water spray environment
Polym Compos Bijwe 18 378 1997 10.1002/pc.10289 Composites as friction materials: recent developments in non-asbestos fibre reinforced friction materials - a review
J Eur Ceram Soc Wang 30 3187 2010 10.1016/j.jeurceramsoc.2010.07.019 Friction surface evolution of carbon-fibre reinforced carbon-silicon carbide composites (Cf/C-SiC)
Key Eng Mater Wang 484 32 2011 10.4028/www.scientific.net/KEM.484.32 Friction surface damage of carbon-fibre reinforced carbon-silicon carbide composites (Cf/C-SiC)
J Eur Ceram Soc Wang 32 3509 2012 10.1016/j.jeurceramsoc.2012.03.039 Microstructure of friction surface developed on carbon fibre reinforced carbon-silicon carbide (Cf/C-SiC)
J2522_201301 Dynamometer Global Brake Effectiveness. SAE International; 2013, 2013-01-21.
Wu H, Bian G, Swarbrick A, Smith A. Friction performance of a Cf/C-SiC composite bake tested on a full-scale dynamometer. In preparation 2016.
Mat Sci Eng Schulte-Fischedick 332 146 2002 10.1016/S0921-5093(01)01719-1 The morphology of silicon carbide in C/C-SiC composites
Int J Ref Met Hard Mater Margiotta 28 191 2010 10.1016/j.ijrmhm.2009.09.002 Microstructural evolution during silicon carbide (SiC) formation by liquid silicon infiltration using optical microscopy
J Eur Ceram Soc Leatherbarrow 32 3509 2012 10.1016/j.jeurceramsoc.2011.09.026 Mechanical behaviour of the constituents inside carbon fibre/carbon-silicon carbide composites characterised by nano-indentation
Wear Osterle 251 1469 2001 10.1016/S0043-1648(01)00785-2 Chemical and microstructural changes induced by friction and wear of brakes
J Auto Eng Chan 218 953 2004 10.1243/0954407041856773 Review of automotive brake friction materials
Wear Osterle 257 215 2004 10.1016/j.wear.2003.12.017 Friction layers and friction films on PMC brake pads
ASLE Trans Tomizawa 30 41 1987 10.1080/05698198708981728 Friction and wear of silicon nitride and silicon carbide in water: hydrodynamic lubrication at low sliding speed obtained by tribochemical wear
Wear Adewoye 70 37 1981 10.1016/0043-1648(81)90270-2 Frictional deformation and fracture in polycrystalline SiC and Si3N4
J Eur Ceram Soc Bian 35 3793 2015 10.1016/j.jeurceramsoc.2015.07.009 Friction and surface fracture of a silicon carbide ceramic brake disc tested against a steel pad
Wear Kato 262 36 2007 10.1016/j.wear.2006.03.046 Tribofilm formation and msssssild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces
J Mater Sci Takeuchi 11 1542 1976 10.1007/BF00540888 Steady-state creep of single-phase crystalline matter at high temperature
Techtonophysics Rutter 3030 147 1999 10.1016/S0040-1951(98)00261-3 On the relationship between the formation of shear zones and the form of the flow law for rocks undergoing dynamic recrystallization
Scr Metall Derby 21 879 1987 10.1016/0036-9748(87)90341-3 On dynamic recrystallization
Johnson 1985 Contact Mechanics
J Eur Ceram Soc Labruquere 18 1953 1998 10.1016/S0955-2219(98)00135-6 Oxidation inhibition of carbon fibre preforms and C/C composites by H3PO4
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.