다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of manufacturing processes, v.22, 2016년, pp.278 - 289
Sree Sabari, S. , Malarvizhi, S. , Balasubramanian, V.
AI-Helper
AA2519-T87 aluminium alloy is a recently developed armour grade aluminium alloy used for fabricating light combat vehicles in the armour application. Joining of this alloy using fusion welding resulted with solidification defects like porosity, hot cracking, etc. To overcome these shortcomings, fric...
Adv Mater Proc Fisher 160 43 2002 Aluminum alloy 2519 in military vehicles
Cheeseman 651 2008 Proceedings of the 24th international symposium on ballistics Ballistic evaluation of aluminum 2139-T8
Adv Struct Mater Quintino 8 33 2012 10.1007/8611_2010_46 Laser welding of structural aluminium
Mater Sci Eng R Mishra 50 1 2005 10.1016/j.mser.2005.07.001 Friction stir welding and processing
Metal Mater Trans A Fonda 37 12 3593 2006 10.1007/s11661-006-1054-2 Precipitation and grain refinement in a 2195 Al friction stir weld
Mater Sci Eng A Fuller 527 9 2233 2010 10.1016/j.msea.2009.11.057 Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds
Mater Des Zhao 56 725 2014 10.1016/j.matdes.2013.11.071 Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding
Mater Des Fu 32 4825 2011 10.1016/j.matdes.2011.06.021 Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir welding
Mater Sci Eng A Zhang Xiao 614 6 2014 10.1016/j.msea.2014.06.093 Influence of water cooling on microstructure and mechanical properties of friction stir welded 2014 Al-T6 joints
Trans Nonfer Met Soc China Liu 20 1387 2010 10.1016/S1003-6326(09)60309-5 Mechanical properties of underwater friction stir welded 2219 aluminum alloy
Metal Mater Trans A Fonda 35A 1487 2014 Microstructural evolution in the heat-affected zone of a friction stir weld
J Mater Eng Perform Zhang 21 1182 2012 10.1007/s11665-011-0060-8 Effect of water cooling on the performances of friction stir welding heat-affected zone
Mater Sci Eng A Fu 559 319 2013 10.1016/j.msea.2012.08.105 Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin sheet
Mater Des Zhang 91 398 2016 10.1016/j.matdes.2015.11.114 Improving bonding quality of underwater friction stitch welds by selecting appropriate plug material and welding parameters and optimizing joint design
Acta Mater Fratini 58 2056 2010 10.1016/j.actamat.2009.11.048 Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints
Scr Mater Benavides 41 809 1999 10.1016/S1359-6462(99)00226-2 Low-temperature friction-stir welding of 2024 aluminum
J Mater Eng Perform Hui-Jie 20 8 1419 2011 10.1007/s11665-010-9787-x Homogeneity of mechanical properties of underwater friction stir welded 2219-T6 aluminum alloy
Mater Charact Zhang 106 255 2015 10.1016/j.matchar.2015.06.003 Enhancing mechanical properties of friction stir welded 2219Al-T6 joints at high welding speed through water cooling and post-welding artificial ageing
Mater Des Liu 32 1548 2011 10.1016/j.matdes.2010.09.032 Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy
Mater Des Zhang 32 4402 2011 10.1016/j.matdes.2011.03.073 Microstructure and mechanical properties as a function of rotation speed in underwater friction stir welded aluminum alloy joints
Metal Mater Trans A Zhang 42 3218 2011 10.1007/s11661-011-0729-5 A transient thermal model for friction stir weld. Part I: the model
Metal Mater Trans A Zhang 42 1717 2011 10.1007/s11661-010-0545-3 Effect of alclad layer on material flow and defect formation in friction-stir-welded 2024 aluminum alloy
J Alloys Compd Tang 2016 10.1016/j.jallcom.2016.01.138 Numerical simulation and experimental investigation of friction stir lap welding between aluminum alloys AA2024 and AA7075
Mater Des Palanivel 40 7 2012 10.1016/j.matdes.2012.03.027 Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys
Case Stud Fire Saf Pang 2016 Friction stir processing of aluminium alloy AA7075: microstructure, surface chemistry and corrosion resistance
Acta Mater Marceau 58 4923 2010 10.1016/j.actamat.2010.05.020 Solute clustering in Al-Cu-Mg alloys during the early stages of elevated temperature ageing
Acta Mater Genevois 53 8 2447 2004 10.1016/j.actamat.2005.02.007 Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds
Mater Sci Eng A Xu 548 89 2012 10.1016/j.msea.2012.03.094 Improvements of strength and ductility in aluminum alloy joints via rapid cooling during friction stir welding
Dieter 1986 Mechanical metallurgy
J Mater Process Technol Liu 142 692 2003 10.1016/S0924-0136(03)00806-9 Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy
J Mech Behav Mater Sree Sabari 24 195 2015 10.1515/jmbm-2015-0021 Influence of post weld heat treatment on tensile properties of friction stir welded AA2519-T87 aluminium alloy joints
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.