참고문헌 (9)

1. Journal of the Korean Society of Manufacturing Technology Engineers M. S. Han 21 4 525 2012 10.7735/ksmte.2012.21.4.525 Han, M. S. and Cho, J. U., “Structural Analysis of Engine Mounting Bracket,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21, No. 4, pp. 525-531, 2012. 

   원문보기 상세보기

2. The Korean Society of Noise and Vibration Engineering U.-H. Park 20 3 235 2010 10.5050/KSNVE.2010.20.3.235 Park, U.-H. and Song, Y.-C., “The Optimization of Vehicle Engine Mounting System Using DFSS (Design for Six Sigma) Technique,” The Korean Society of Noise and Vibration Engineering, Vol. 20, No. 3, pp. 235-241, 2010. 

   원문보기 상세보기

3. J. Korean Soc. Precis. Eng. S. S. Park 22 2 30 2005 Park, S. S., Kim, B. M., and Lee, J. M., “Process Design of Cold Forging for Drum Clutch with Inner Tooth Component,” J. Korean Soc. Precis. Eng., Vol. 22, No. 2, pp. 30-37, 2005. 

   원문보기 상세보기

4. J. Korean Soc. Precis. Eng. K.-O. Lee 23 1 185 2006 Lee, K.-O., Kim, J.-M., Je, J.-S., and Kang, S.-S., “Development of Precise Clutch Gear for Automobile Transmission by Compound Forging Process,” J. Korean Soc. Precis. Eng., Vol. 23, No. 1, pp. 185-192, 2006. 

   원문보기 상세보기

5. Transactions of Materials Processing H. S. Lee 24 3 181 2015 10.5228/KSTP.24.3.181 Lee, H. S., Kim, T. H., Kim, S. H., Hong, E. C., and Lee, J. H., “A Study on the Optimum Design for Energy Saving of an Auto Transmission Part,” Transactions of Materials Processing, Vol. 24, No. 3, pp. 181-186, 2015. 

   원문보기 상세보기

6. Journal of the Korean Society of Manufacturing Technology Engineers H.-H. Kwon 19 1 33 2010 Kwon, H.-H., Moon, K.-J., and Song, S.-E., “Forging Process Analysis of the Multi-Forging Die for the Unified Universal Pipe Joint of the Intermediate Shaft,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 19, No. 1, pp. 33-41, 2010. 

7. Journal of the Korean Society of Manufacturing Technology Engineers S.-E. Song 21 2 331 2012 10.7735/ksmte.2012.21.2.331 Song, S.-E. and Kwon, H.-H., “A Study on the Cold Forging Development of Guide Valve for the Fuel Pressure Regulator,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21, No. 2, pp. 331-336, 2012. 

   원문보기 상세보기

8. Transactions of Materials Processing B. S. Kang 23 4 211 2014 10.5228/KSTP.2014.23.4.211 Kang, B. S. and Ku, T. W., “Process Modification and Numerical Simulation for an Outer Race of a CV Joint Using Multi-Stage Cold Forging,” Transactions of Materials Processing, Vol. 23, No. 4, pp. 211-220, 2014. 

   원문보기 상세보기

9. Transactions of Materials Processing H. W. Jeon 23 2 88 2014 10.5228/KSTP.2014.23.2.88 Jeon, H. W., Yoon, J. H., Lee, J. H., and Kim, B. M., “Plate Forging Process Design for an Under-Drive Brake Piston in Automatic Transmission,” Transactions of Materials Processing, Vol. 23, No. 2, pp. 88-94, 2014. 

   원문보기 상세보기