최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied thermal engineering, v.103, 2016년, pp.607 - 615
Tuhovcak, J. (Corresponding author.) , Hejcik, J. , Jicha, M.
Abstract One of the main factors affecting the efficiency of reciprocating compressor is heat transfer inside the cylinder. An analysis of heat transfer could be done using numerical models or integral correlations developed mainly from approaches used in combustion engines; however their accuracy ...
Almbauer 1 2010 Int. Compress. Eng. Conf Application of computational fluid dynamics for the thermodynamic development of a new generation of hermetic reciprocating compressor
Appl. Therm. Eng. Morriesen 41 61 2012 10.1016/j.applthermaleng.2011.12.011 Experimental investigation of transient fluid flow and superheating in the suction chamber of a refrigeration reciprocating compressor
Balduzzi 92 2014 9th EFRC Conference Improvement of the cooling performance of a reciprocating compressor cylinder by a conjugate heat transfer and deformation analysis
Int. J. Refrig. Castaing-Lasvignottes 33 381 2010 10.1016/j.ijrefrig.2009.10.007 Dynamic simulation of reciprocating refrigeration compressors and experimental validation
Int. J. Refrig. Longo 26 6 681 2003 10.1016/S0140-7007(03)00024-0 Unsteady state analysis of the compression cycle of a hermetic reciprocating compressor
Int. J. Refrig. Pérez-Segarra 28 579 2005 10.1016/j.ijrefrig.2004.09.014 Detailed thermodynamic characterization of hermetic reciprocating compressors
Int. J. Refrig. Farzaneh-Gord 2014 Thermodynamic analysis of natural gas reciprocating compressors based on real and ideal gas models
Ind. Eng. Chem. Res. Bell 53 6 2498 2014 10.1021/ie4033999 Pure and pseudo-pure fluid thermophysical property evaluation and the open-source thermophysical property library coolprop
J. Appl. Mech. Costagliola 17 415 1950 10.1115/1.4010169 The theory of spring-loaded valve for reciprocating compressor
R. Aigner, H. Steinrück, Modelling Fluid Dynamics, Heat Transfer and Valve Dynamics in a Reciprocating Compressor, in: 5th Conference of the EFRC, Prague, 2007, pp. 171-180.
Lang 1 2008 Eng. Conf. Coupling of 0-, 1- and 3-d Tool for the Simulation of the Suction Line of a Hermetic Reciprocating Compressor
Int. J. Refrig. Hu 45 107 2014 10.1016/j.ijrefrig.2014.06.007 Generic network modeling of reciprocating compressors
Int. J. Refrig. Dutra 59 168 2015 10.1016/j.ijrefrig.2015.07.023 A simulation approach for hermetic reciprocating compressors including electrical motor modeling
10.1088/1757-899X/90/1/012068 S.K. Lohn, M.C. Diniz, C.J. Deschamps, A thermal model for analysis of hermetic reciprocating compressors under the on-off cycling operating condition, in: IOP Conf. Ser. Mater. Sci. Eng., vol. 90, 2015, p. 012068.
10.1088/1757-899X/90/1/012018 J. Tuhovcak, J. Hejcik, M. Jicha, Modelling of fluid flow and heat transfer in a reciprocating compressor, in: IOP Conference Series: Material Science and Engineering, vol. 012018, 2015.
F.P. Disconzi, E.L.L. Pereira, C.J. Deschamps, Development of an In-Cylinder Heat Transfer Correlation for Reciprocating Compressors, in: International Compressor Engineering Conference, 2012, pp. 1-10.
Arch. Proc. Inst. Mech. Eng. 1847-1982 (vols. 1-196) Annand 185 1970 976 2006 Instantaneous heat transfer rates to the cylinder head surface of a small compression‐ignition engine
R.P. Adair, E.B. Qvale, J.T. Pearson, Instantaneous heat transfer to cylinder wall in reciprocating compressors, in: Purdue Compress. Technol. Conf., 1972, pp. 521-526.
Soc. Automot. Eng. Trans. Woschni 76 3065 1967 A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine
Bejan 2013 Convection Heat Transfer
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.