[논문]Structural collapse correlative analysis using phenomenological fiber hinge elements to simulate two‐directional column deteriorations

Kasai, Kazuhiko; Nam, Tran‐; Tuan; Maison, Bruce F.

doi:10.1002/eqe.2742

Structural collapse correlative analysis using phenomenological fiber hinge elements to simulate two‐directional column deteriorations

Earthquake engineering & structural dynamics, v.45 no.10, 2016년, pp.1581 - 1601

Kasai, Kazuhiko (Structural Engineering Research Center, Tokyo Institute of Technology, Yokohama, Japan) , Nam, Tran‐Tuan (Department of Built Environment, Tokyo Institute of Technology, Yokohama, Japan) , Maison, Bruce F. (Department of Built Environment, Tokyo Institute of Technology, Yokohama, Japan)

Abstract ▼ AI-Helper

SummaryThis paper presents three‐dimensional nonlinear dynamic analyses of a full‐scale four‐story steel building tested to collapse in 2007 at the E‐Defense shake‐table facility in Japan, using strong ground motion. Local buckling and consequent strength deterioration of all six columns at the first‐story level were observed as the main reason for the building collapse. Fiber hinge element that consists of fibers discretizing the column cross section is used model each end of the column. It has zero length but considers finite yield‐zone length for the fiber to simulate elastoplastic behavior and local buckling. Other parts of the building are modeled by standard column, beam, truss, and spring elements. Despite the unavoidable limitation of the parameters defining the fiber hinge element's properties that are empirically determined from the behavior of the cantilever column tested using an identical steel member, the analysis using the element appears to simulate well the column behavior because of the axial load and biaxial bending moment whose relative magnitudes differ considerably because of the locations. The analysis results indicate different deterioration patterns of the columns and effects of complex loading such as compression and tensile axial load applied alternately, additional high frequency axial load caused by vertical accelerations, and shifting of the principal directions of the bending moments cycle by cycle. Responses such as story drift, accelerations, base shear, and energy dissipation are also simulated well, and progress of local deterioration in the first‐story columns and global soft‐story mechanism is clarified by the analysis. Copyright © 2016 John Wiley & Sons, Ltd.

주제어

참고문헌 (27)

Kasai K , Ooki Y , Motoyui S , Takeuchi T , Sato E . E‐Defense tests on full‐scale steel buildings, part 1 ‐ experiments using dampers and isolators . Proceedings of Structural Congress , 247‐17 . ASCE : Long Beach , 2007 .
Suita K , Matsuoka Y , Yamada S , Shimada Y , Tada M , Kasai K . Experimental procedure and elastic response characteristics of shaking table test – complete collapse test of full‐scale 4‐story steel building part 1 (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 2009 ; 635 : 157 – 166 .
Yamada S , Suita K , Matsuoka Y , Shimada Y . Elasto‐plastic responses and process leading to a collapse mechanism – complete collapse test of full‐scale 4‐story steel building part 2 (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 2009 ; 644 : 1851 – 1859 .
Shimada Y , Suita K , Yamada S , Matsuoka Y , Tada M , Ohsaki M , Kasai K . Collapse behavior on shaking table test – complete collapse test of full‐scale 4‐story steel building part 3 (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 2010 ; 653 : 1351 – 1360 .
Maison BF , Kasai K , Deierlein G . ASCE‐41 and FEMA‐351 evaluation of E‐Defense collapse test . Earthquake Spectra 2009 ; 25 ( 4 ): 927 – 953 .

상세보기
Lignos GD , Hikino T , Matsuoka Y , Nakashima M . Collapse assessment of steel moment frames based on E‐Defense full‐scale shake table collapse test . Journal of Structural Engineering 2013 ; 139 : 120 – 132 .
Tada M , Tamai H , Ohgami K , Kuwahara S , Horimoto A . Analytical simulation utilizing collaborative structural analysis system . Proceedings of the 14 th World Conference on Earthquake Engineering . : Beijing , 2008 .
Pan P , Ohsaki M , Zhang J . Collapse analysis of 4‐story steel moment‐resisting frames . Proceedings of the 14 th World Conference on Earthquake Engineering . : Beijing , 2008 .
Miyamura T , Yamashita T , Akiba H , Ohsaki M . Dynamic FE simulation of four‐story steel frame modeled by solid elements and its validation using results of full‐scale shake‐table test . Earthquake Engineering & Structural Dynamics 2014 . DOI: 10.1002/eqq.2526 .
Isobe D , Han WS , Miyamura T . Verification and validation of a seismic response analysis code for framed structures using the ASI‐Gauss technique . Earthquake Engineering & Structural Dynamics 2013 ; 42 ( 12 ): 1767 – 1784 .

상세보기
Yu YJ , Tsai KC , Weng YT , Lin BZ , Lin JL . Analytical studies of a full‐scale steel building shaken to collapse . Engineering Structures 2010 ; 32 : 3418 – 3430 .

상세보기
Chen X , Han X , Jack C , Lin S , Mao G . Dynamic inelastic numerical simulation for a shaking table test of a full scale steel moment frame structure based on OpenSEES . Proceedings of the 14 th World Conference on Earthquake Engineering . : Beijing , 2008 .
Uriz P , Filippou FC , Mahin SA . Model for cyclic inelastic buckling of steel braces . Journal of Structural Engineering 2008 ; 134 ( 4 ): 619 – 628 .
Spacone E , Filippou FC , Taucer FF . Fibre beam‐column model for non‐linear analysis of R/C frames: Part I. Formulation . Earthquake Engineering & Structural Dynamics 1996 ; 25 ( 7 ): 711 – 726 .

상세보기
Liang QQ , Uy B , Liew JYR . Nonlinear analysis of concrete‐filled thin‐walled steel box columns with local buckling effects . Journal of Constructional Steel Research 2006 ; 62 ( 6 ): 581 – 591 .

상세보기
Hajjar JF , Gourley BC . Representation of concrete‐filled steel tube cross‐section strength . Journal of Structural Engineering 1996 ; 122 ( 11 ): 1327 – 1336 .
Varma AH , Ricles JM , Sause R , Lu LW . Seismic behavior and modeling of high‐strength composite concrete‐filled steel tube (CFT) beam–columns . Journal of Constructional Steel Research 2002 ; 58 ( 5 ): 725 – 758 .

상세보기
Uy B . Local and post‐local buckling of concrete filled steel welded box columns . Journal of Constructional Steel Research 1998 ; 47 ( 1 ): 47 – 72 .

상세보기
Kunnath SK , Heo Y , Mohle JF . Nonlinear uniaxial material model for reinforcing steel bars . Journal of Structural Engineering 2009 ; 135 ( 4 ): 335 – 343 .
Monti G , Nuti C . Nonlinear cyclic behavior of reinforcing bars including buckling . Journal of Structural Engineering 1992 ; 118 ( 12 ): 3268 – 3284 .
PERFORM . Components and Elements for PERFORM‐3D and PERFORM‐Collapse, Version 4 . CSI (Computers Structures) INC : Walnut Creek, CA , 2006 .
Black RG , Wenger WA , Popov EP . Inelastic Buckling of Steel Struts Under Cyclic Load Reversals UCB/EERC‐80/40. Earthquake Engineering Research Center : Berkeley, California , 1980 .
Yamada S , Akiyama H , Kuwamura H . Post‐buckling and deteriorating behavior of box‐section steel members (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 1993 ; 444 : 135 – 143 .
Yamada S , Ishida T , Shimada Y , Matsunaga T . Cyclic loading test on RHS columns under bi‐directional horizontal forces (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 2013 ; 683 : 203 – 212 .
Maison BF . PC‐ANSR: a computer program for nonlinear structural analysis . National Information Service for Earthquake Engineering, NISEE/Computer Applications, University of California, Berkeley, 1992 .
Architectural Institute of Japan . Recommendation for Limit State Design of Steel Structures (in Japanese). AIJ : Tokyo , 2010 .
Matsuoka Y , Suita K , Yamada S , Shimada Y , Akazawa M , Matsumiya T . Evaluation of seismic performance of exterior cladding in full‐scale 4‐story building shaking table test (in Japanese) . Journal of Structural and Construction Engineering, Transactions of AIJ 2009 ; 641 : 1353 – 1361 .

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

AI-Helper ※ AI-Helper는 을 사용합니다.

AI-Helper

안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Structural collapse correlative analysis using phenomenological fiber hinge elements to simulate two‐directional column deteriorations

Abstract ▼ AI-Helper

주제어

참고문헌 (27)

이 논문을 인용한 문헌

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트