최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of fatigue, v.92 pt.1, 2016년, pp.166 - 178
Chen, C. , Wang, Y. , Ou, H. , Lin, Y.J.
Thermal fatigue cracking is one of the mostly encountered failure mechanisms for die halves in the die casting industry. This is due to rapid alternating heating and cooling of die surfaces during the casting process. In this paper, an experimental thermal fatigue test method based on cyclic inducti...
Garza-Delgado A. A study of casting distortion and residual stresses in die casting. Ph.D. thesis, The Ohio State University; 2007.
Eng Fail Anal Klobčar 20 43 2012 10.1016/j.engfailanal.2011.10.005 Thermo fatigue cracking of die casting dies
Wear Shivpuri 192 12 49 1996 10.1016/0043-1648(95)06749-3 An evaluation of metallic coatings for erosive wear resistance in die casting applications
Thin Solid Films Starling 436 1997 10.1016/S0040-6090(97)00600-7 Thermal fatigue of hot work tool steel with hard coatings
Srivastava A, Joshi V, Shivpuri R. Numerical models and their validity in the prediction of heat checking in die casting tooling. In: 6th International tooling conference; 2004.
Christopher R. Analysis of thermal fatigue and heat checking in die-casting dies: a finite element approach. Thesis, Mechanical Engineering; 1992.
Benedyk 187 1970 Tool and die failures Thermal fatigue behavior of die materials for aluminium die casting
J Mater Process Technol Li 74 23 1998 10.1016/S0924-0136(97)00244-6 Study of the thermal fatigue crack initial life of h13 and h21 steels
Velay V, Persson A, Bernhart G, Penazzi L, Bergström J. Thermal fatigue of a tool steel: experiment and numerical simulation. In: Proceedings of the 6th international tooling conference: the use of tool steels: experience and research; 2002. p. 667-85.
Scand J Metall Persson 33 1 53 2004 10.1111/j.1600-0692.2004.00678.x Strain-based approach to crack growth and thermal fatigue life of hot work tool steels
Surf Coat Technol Persson 191 2-3 216 2005 10.1016/j.surfcoat.2004.04.053 Thermal fatigue cracking of surface engineered hot work tool steels
Comput Mater Sci Klobčar 31 3-4 368 2004 10.1016/j.commatsci.2004.03.022 Finite element modeling of GTA weld surfacing applied to hot-work tooling
Mater Sci Eng A-Struct Mater Prop Microstruct Process Klobčar 472 1-2 198 2008 10.1016/j.msea.2007.03.025 Thermal fatigue of materials for die-casting tooling
Comput Mater Sci Klobčar 43 4 1147 2008 10.1016/j.commatsci.2008.03.009 Thermal stresses in aluminium alloy die casting dies
Yatsushiro K, Sano M, Kuramoto M. Thermal fatigue properties of laser peened hot work die steel (h13). In: Advances in X-ray Analysis, vol. 46. International Centre for Diffraction Data; 2003.
Eng Fail Anal Borrego 16 596 2009 10.1016/j.engfailanal.2008.02.010 Mould steels repaired by laser welding
UDDEHOLM. ASSAB 8407 SUPREME. UDDEHOLM, 080808th Edition; 2012.
Optics Laser Technol Meng 44 850 2012 10.1016/j.optlastec.2011.11.019 Effect of biomimetic non-smooth unit morphology on thermal fatigue behavior of h13 hot-work tool steel
FLIR. Flir R&D Software 3.3-Users manual; 2012.
Kovalenko 1969 Thermoelasticity: basic theory and applications
Manson S. Behavior of materials under condition of thermal stress. Tech rep., University of Michigan Engineering Research Institute; 1953.
Int J Fatigue Sasaki 28 3 203 2005 10.1016/j.ijfatigue.2005.06.025 Low cycle thermal fatigue and microstructural change of AC2B-T6 aluminum alloy
Kilinski 384 1991 Solder joint reliability Modern approaches to fatigue life prediction of SMT solder joints
Lau 1991 Solder joint reliability - theory and applications
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.