최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia Technology, v.25, 2016년, pp.908 - 915
Dixit, N.K. , Srivastava, R. , Narain, R.
In this research, an attempt has been made to find out the influence of the process parameter along with their interactions on the dimensional accuracy of part fabricated using two different rapid prototyping machines namely fused deposition modelling machine, and a low cost open source 3D printer. ...
10.1016/j.cirp.2010.05.008 D. Ceglarek, H.A. ElMaraghy, A Fischer, S.J. Hu, L. Laperriere, S.T. Newman, J. Vancza, T. Tolio. Species Co-evolution of Products, Processes and Production Systems.CIRP Annals Manufacturing Technology, 2010;59:672-693.
10.1016/S1007-0214(09)70059-8 S. Li, R. Zhang, F. Lin, R. Wu, Q. Lu, Z. Xiong, and X. Wang Y. Yan. Rapid Prototyping and Manufacturing Technology: Principle, RepresentativeTechnics, Applications, and Development Trends. Tsinghua Science & Technology, 2009;14:1-12.
10.1016/S0924-0136(00)00613-0 Matuszak A, Rosochowski A. Rapid Tooling - The State of Art. Journal of Material Processing Technology, 2000;106:191-208.
Journal of Engineering Manufacture Oh 222 201 2008 10.1243/09544054JEM724 A Benchmark Study on Rapid Prototyping Processes and Machines: Quantitative Comparisons of Mechanical Properties Accuracy, Roughness, Speed, and Material Cost
Rafiq Nooran 2005 Rapid Prototyping Principles and Application
10.1002/(SICI)1099-0542(1999)7:3<186::AID-CAE7>3.0.CO;2-Q J.C. Frimodig, H.N. Le, X. Li, S.B. Putnam, K. Golda, J.,Foyos, R. Noorani, B. Fritz Q. Dao. Calculation of Shrinkage Compensation Factors for Rapid Prototyping (FDM 1650). Computer Applications in Engineering Education, 1999;7:186-195.
Y.S. Wong, H.T. Loh F. Xu. Toward Generic Models for Comparative Evaluation and Process Selection in Rapid Prototyping and Manufacturing. Journal of Manuf Systems, 2000;19(5):283-296.
R.N. Gopal, L. Naing, A.B. Hakim, A.R. Samsudin A. Nizam. Dimensional Accuracy of the Skull Models Produced by Rapid Prototyping Technology using Stereolithography Apparatus. Archives of Orofacial Sciences, 2006;1: 60-66.
10.1016/j.procir.2015.04.014 I. Bodi, J. Kacani, F. Lavecchia, L.M. Galantucci. Analysis of Dimensional Performance for a 3D Open-Source Printer based on Fused Deposition Modeling Technique. Procedia CIRP, 2015;28:82-87.
Comput Aided Design Cardano 39 80 2007 10.1016/j.cad.2006.10.003 Statistical Analysis of the Stereolithographic Process to Improve the Accuracy
10.1016/j.wear.2007.10.001 Amar Patnaik, Alok Satapathy S.S. Mahapatra,“Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-Reinforced Polyester Composites”Wear, 265:214-222 vol.265, pp. 214-222, 2008.
10.1016/j.jmatprotec.2007.12.144 N. Jawahar, U. Chandrasekar, K.N. Ramanathan K. Chockalingam. Establishment of Process Model for Part Strength in Stereolithography. Journal of Materials Processing Technology, 2008;208:348-365.
Somayeh Akhavan Tabatabaei, Ghafour Amiri Hossein Hasani. Grey Relational Analysis to Determine the Optimum Process Parameters for Open-End Spinning Yarns. Journal of Engineered Fibers and Fabrics, 2012;7(2):81-86.
10.1016/j.jmatprotec.2008.06.046 D. Yu-Hsin Lin, Yung-Kuang Yang, Ming-Chang Jeng Chorng-Jyh Tzeng. Optimization of Turning Operations with Multiple Performance Characteristics using the Taguchi Method and Grey Relational Analysis. Journal of Mate Proc Tech, 2009;209:2753-2759.
Xi Jun Tong, Jin Ye Wang Tian Ming. A Model Research for Prototype Warp Deformation in the FDM Process.IJAMT, 2007;33:1087-96.
10.1243/09544054JEM990 DZhang Y. A Chou K. A Parametric Study of Part Distortion in FDM using 3D Element Analysis. Proc IMechE: JEM, 2008;222:959-967.
10.1007/s00170-005-0085-y Hsiang-Yao Lan Huang You-Min. Path Planning Effect on the Accuracy of RP System.I J of Ad Man Tech, 2006;30:233-246.
10.1016/S0921-5093(01)01179-0 Barnett DM, Prinz FB Nickel AH. Thermal Stresses and Deposition Patterns in Layered Manuf Material Sci and Engg, 2001;A317:59-64.
Int Journal of Adv Manuf Tech Chiu 18 579 2001 10.1007/s001700170034 A New Slicing Procedure for Rapid Prototyping Systems
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.