참고문헌 (24)

1. Srinivasan, P. Bala, Dietzel, W., Zettler, R., dos Santos, J.F., Sivan, V.. Stress corrosion cracking susceptibility of friction stir welded AA7075–AA6056 dissimilar joint. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.392, no.1, 292-300.

   상세보기

2. 10.2320/matertrans.l-mz201114 

   

3. Sato, Y.S., Kurihara, Y., Park, S.H.C., Kokawa, H., Tsuji, N.. Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding. Scripta materialia, vol.50, no.1, 57-60.

   상세보기

4. Journal of Ceramic Processing Research 13 6 705 2012 

   상세보기

5. Nakata, K., Kim, Y.G., Fujii, H., Tsumura, T., Komazaki, T.. Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.437, no.2, 274-280.

   상세보기

6. Sato, Y.S., Yamanoi, H., Kokawa, H., Furuhara, T.. Microstructural evolution of ultrahigh carbon steel during friction stir welding. Scripta materialia, vol.57, no.6, 557-560.

   상세보기

7. Journal of Korean Welding and Joining Society 28 5 2010 

8. Journal of Korean Welding and Joining Society 29 5 54 2011 10.5781/KWJS.2011.29.5.552 

   원문보기 상세보기

9. Proceedings of the Japan Welding Society 86, article 43 2010 

10. Couret, Alain, Molénat, Guy, Galy, Jean, Thomas, Marc. Microstructures and mechanical properties of TiAl alloys consolidated by spark plasma sintering. Intermetallics, vol.16, no.9, 1134-1141.

    상세보기

11. Jia, K., Fischer, T.E., Gallois, B.. Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites. Nanostructured materials, vol.10, no.5, 875-891.

    상세보기

12. Journal of the Korean Institute of Metals and Materials 46 4 223 2008 

    상세보기

13. Zhao, Jinfeng, Holland, Troy, Unuvar, Cosan, Munir, Zuhair A.. Sparking plasma sintering of nanometric tungsten carbide. International journal of refractory metals & hard materials, vol.27, no.1, 130-139.

    상세보기

14. Kang, H.-S., Doh, J.-M., Hong, K.-T., Ko, I.-Y., Shon, I.-J.. Rapid Sintering of Nanostuctured Tungsten Carbide by High-Frequency Induction Heating and its Mechanical Properties. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.48, no.11, 1009-1013.

    상세보기

15. 1998 

16. Journal of Korean Institute of Metals and Materials 50 12 921 2012 

17. 10.1007/bf00724706 

    

18. 10.1016/s0263-4368(97)81231-0 

    

19. Journal of the American Ceramic Society 85 11 2670 2002 

    상세보기

20. 10.3365/KJMM.2011.49.1.040 

    

21. ANSTIS, G.R., CHANTIKUL, P., LAWN, B.R., MARSHALL, D.B.. A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements. Journal of the American Ceramic Society, vol.64, no.9, 533-538.

    상세보기

22. Sigl, L.S., Fischmeister, H.F.. On the fracture toughness of cemented carbides. Acta metallurgica, vol.36, no.4, 887-897.

    상세보기

23. Han, Joo-Hwan, Kim, Doh-Yeon. Determination of three-dimensional grain size distribution by linear intercept measurement. Acta materialia, vol.46, no.6, 2021-2028.

    상세보기

24. Kim, Hwan-Cheol, Park, Hyun-Kuk, Jeong, In-Kyoon, Ko, In-Yong, Shon, In-Jin. Sintering of binderless WC–Mo₂C hard materials by rapid sintering process. Ceramics international, vol.34, no.6, 1419-1423.

    상세보기