최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied surface science, v.392, 2017년, pp.826 - 833
Ma, Q. , Li, L. , Xu, Y. , Gu, J. , Wang, L. , Xu, Y.
TiAlSiN nanocomposite coatings were deposited onto cemented carbide (WC-10wt.%, Co) substrates by high power impulse magnetron sputtering (HiPIMS). The effect of substrate bias voltage on plasma discharge characterization of HiPIMS, element concentration, deposition rate, microstructure, surface/cro...
J. Vac. Sci. Technol. B Christiansen 16 19 1998 10.1116/1.589778 Microstructure of novel superhard nanocrystalline-amorphous composites as analyzed by high resolution transmission electron microscopy
Vacuum Fernandes 82 1470 2008 10.1016/j.vacuum.2008.03.050 Effect of the microstructure on the cutting performance of superhard (Ti,Si,Al)N nanocomposite films
Surf. Coat. Technol. Fuentes 205 1368 2010 10.1016/j.surfcoat.2010.09.004 High temperature tribological characterisation of TiAlSiN coatings produced by cathodic arc evaporation
Surf. Coat. Technol. Kim 200 1391 2005 10.1016/j.surfcoat.2005.08.109 Deposition of superhard TiAlSiN thin films by cathodic arc plasma deposition
Surf. Coat. Technol. Pfeiler 203 3104 2009 10.1016/j.surfcoat.2009.03.036 Improved oxidation resistance of TiAlN coatings by doping with Si or B
Thin Solid Films Vepek 317 449 1998 10.1016/S0040-6090(97)00665-2 New development in superhard coatings: the superhard nanocrystalline-amorphous composites
Thin Solid Films Carvalho 398 391 2001 10.1016/S0040-6090(01)01348-7 Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings
Surf. Coat. Technol. Niederhofer 173 1999 10.1016/S0257-8972(99)00451-X Structural properties, internal stress and thermal stability of nc-TiN/a-Si3N4, nc-TiN/TiSix and nc-(Ti1-yAlySix)N superhard nanocomposite coatings reaching the hardness of diamond
J. Vac. Sci. Technol. A Vepek 14 46 1996 10.1116/1.579878 Superhard nanocrystalline W2N/amorphous Si3N4 composite materials
Appl. Phys. Lett. Vepek 66 2640 1995 10.1063/1.113110 Superhard nanocrystalline composite materials: the TiN/Si3N4 system
Thin Solid Films Veprek 268 64 1995 10.1016/0040-6090(95)06695-0 A concept for the design of novel superhard coatings
Met. Finish. Mattox 98 2000 10.1016/S0026-0576(00)80350-5 Handbook of physical vapor deposition (PVD) processing
J. Vac. Sci. Technol. A Christou 18 2897 2000 10.1116/1.1312370 Ionization of sputtered material in a planar magnetron discharge
J. Vac. Sci. Technol. A Ricard 20 1488 2002 10.1116/1.1488948 Density and temperature in an inductively amplified magnetron discharge for titanium deposition
J. Appl. Phys. Konstantinidis 95 2900 2004 10.1063/1.1646452 Measurement of ionic and neutral densities in amplified magnetron discharges by pulsed absorption spectroscopy
Surf. Coat. Technol. Kouznetsov 122 290 1999 10.1016/S0257-8972(99)00292-3 A novel pulsed magnetron sputter technique utilizing very high target power densities
Surf. Coat. Technol. Sarakinos 204 1661 2010 10.1016/j.surfcoat.2009.11.013 High power pulsed magnetron sputtering: a review on scientific and engineering state of the art
J. Phys. D Appl. Phys. Uslu 42 15304 2009 10.1088/0022-3727/42/1/015304 On the relationship between the peak target current and the morphology of chromium nitride thin films deposited by reactive high power pulsed magnetron sputtering
Appl. Surf. Sci. Devia 257 6181 2011 10.1016/j.apsusc.2011.02.027 TiAlN coatings deposited by triode magnetron sputtering varying the bias voltage
Appl. Surf. Sci. Du 292 688 2014 10.1016/j.apsusc.2013.12.035 Structure and properties of TiAlLaN films deposited at various bias voltages
Appl. Surf. Sci. Lv 258 3864 2012 10.1016/j.apsusc.2011.12.048 Influence of substrate bias voltage on structure and properties of the CrAlN films deposited by unbalanced magnetron sputtering
Thin Solid Films Li 377-378 401 2000 10.1016/S0040-6090(00)01368-7 Continuous stiffness measurement and creep behavior of composite magnetic tapes
J. Macromol. Sci. Phys. Hochstetter 38 681 1999 10.1080/00222349908248131 Strain-Rate effects on hardness of glassy polymers in the nanoscale range. comparison between quasi-Static and continuous stiffness measurements
Surf. Coat. Technol. Mccune 53 189 1992 10.1016/0257-8972(92)90122-Q Methodology for adhesion characterization of microwave PECVD diamond films on SiAlON tool inserts
J. Mater. Res. Fan 9 2850 1994 10.1557/JMR.1994.2850 Diamond-ceramic composite tool coatings
J. Appl. Phys. Oks 105 93304 2009 10.1063/1.3125443 Evolution of the plasma composition of a high power impulse magnetron sputtering system studied with a time-of-flight spectrometer
Thin Solid Films Bohlmark 515 1522 2007 10.1016/j.tsf.2006.04.051 The ion energy distributions and ion flux composition from a high power impulse magnetron sputtering discharge
Surf. Coat. Technol. Lattemann 200 6495 2008 10.1016/j.surfcoat.2005.11.082 Investigation of high power impulse magnetron sputtering pretreated interfaces for adhesion enhancement of hard coatings on steel
J. Vac. Sci. Technol. A Christie 23 330 2005 10.1116/1.1865133 Target material pathways model for high power pulsed magnetron sputteringa
Vacuum Emmerlich 82 867 2008 10.1016/j.vacuum.2007.10.011 The physical reason for the apparently low deposition rate during high-power pulsed magnetron sputtering
J. Appl. Phys. Anders 102 113303 2007 10.1063/1.2817812 High power impulse magnetron sputtering: current-voltage-time characteristics indicate the onset of sustained self-sputtering
Plasm. Sour. Sci. Technol. Mishra 19 1 2010 10.1088/0963-0252/19/4/045014 The evolution of the plasma potential in a HiPIMS discharge and its relationship to deposition rate
J. Phys. D Appl. Phys. Horwat 41 1983 2008 10.1088/0022-3727/41/13/135210 Spatial distribution of average charge state and deposition rate in high power impulse magnetron sputtering of copper
Vacuum Gangopadhyay 84 843 2010 10.1016/j.vacuum.2009.11.010 Effect of substrate bias voltage on structural and mechanical properties of pulsed DC magnetron sputtered TiN-MoSx composite coatings
J. Mater. Res. MinKu Lee 12 2393 1997 10.1557/JMR.1997.0317 Characteristics of TiN film deposited on stellite using reactive magnetron sputter ion plating
Appl. Surf. Sci. Wang 253 3722 2007 10.1016/j.apsusc.2006.08.003 The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA
Appl. Surf. Sci. Zhang 258 7274 2012 10.1016/j.apsusc.2012.03.100 Influence of pulsed substrate bias on the structure and properties of Ti-Al-N films deposited by cathodic vacuum arc
Surf. Coat. Technol. Diserens 108-109 241 1998 10.1016/S0257-8972(98)00560-X Improving the properties of titanium nitride by incorporation of silicon
A.J. Edwards, H.P. Klug and L.E. Alexander, x-ray diffraction procedures for polycrystalline and amorphous materials: Wiley-Interscience New York, 2nd edn. 1974, Anal. Chime. Act. 77(1975) 349.
Thin Solid Films Lee 494 161 2006 10.1016/j.tsf.2005.07.190 The effects of pulse frequency and substrate bias to the mechanical properties of CrN coatings deposited by pulsed DC magnetron sputtering
Thin Solid Films Olaya 474 119 2005 10.1016/j.tsf.2004.08.067 Comparative study of chromium nitride coatings deposited by unbalanced and balanced magnetron sputtering
Surf. Coat. Technol. Peng 138 23 2001 10.1016/S0257-8972(00)01139-7 Surface rough of diamond-like carbon films prepared using various techniques
Int. J. Refract. Met. Hard Mater. Ma 59 114 2016 10.1016/j.ijrmhm.2016.06.005 Effect of Ti content on the microstructure and mechanical properties of TiAlSiN nanocomposite coatings
Int. J. Refract. Meter. Hard Mater. Wang 28 593 2010 10.1016/j.ijrmhm.2010.05.001 Effect of Si addition on microstructure and mechanical properties of Ti-Al-N coating
Int. J. Refract. Met. Hard Mater. Yang 52 29 2015 10.1016/j.ijrmhm.2015.04.016 Effect of Mo content on the structure and mechanical properties of TiAlMoN films deposited on WC-Co cemented carbide substrate by magnetron sputtering
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.