최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composite structures, v.164, 2017년, pp.118 - 129
Lee, Min-sik (Corresponding author.) , Kang, Chung-gil
In this study, a hybrid composite material was fabricated by stacking carbon fiber-reinforced plastic onto CR420 plates to increase the specific strength and stiffness relative to those of thick boron steel plates and dual-phase steels. Simulations were first used to compare and evaluate the abiliti...
Mater Manuf Process Caballeroa 22 4 502 2007 10.1080/10426910701236023 Advanced ultrahigh strength bainitic steels
Steel Res Int Fan 80 3 241 2009 A review of the physical metallurgy related to the hot press forming of advanced high strength steel
J Mater Process Technol Karbasian 210 15 2103 2010 10.1016/j.jmatprotec.2010.07.019 A review on hot stamping
Key Eng Mat Zadpoor 344 373 2007 10.4028/www.scientific.net/KEM.344.373 Mechanics of tailor welded blanks: an overview
J Eng Manuf Lee 228 540 2014 10.1177/0954405413501810 Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al-Si and Zn-coated boron steel
Stohr T, Lechler J, Merklein M. Investigations on different strategies for influencing the microstructural properties with respect to partial hot stamping. In: 2nd international conference on hot sheet metal forming of high-performance steel, Lulea, Sweden; 2009. p. 273-81.
J Mater Process Technol Xu 214 925 2014 10.1016/j.jmatprotec.2013.11.018 Experimental investigation on high strength steel (HSS) tailor-weldedblanks (TWBs)
Procedia Eng AL-Zubaidy l 10 2453 2011 10.1016/j.proeng.2011.04.404 Mechanical behaviour of normal modulus carbon fibre reinforced polymer (CFRP) and epoxy under impact tensile loads
Compos Struct Van Paepegem 72 2 212 2006 10.1016/j.compstruct.2004.11.006 Effect of friction on the hysteresis loops from three-point bending fatigue tests of fibre-reinforced composites
Composites Part B Yu 43 5 2279 2012 10.1016/j.compositesb.2012.01.024 Experimental study on CFRP-to-steel bonded interfaces
J Constr Steel Res El-Tawil 67 261 2011 10.1016/j.jcsr.2010.11.007 Retraining local and global buckling behavior of steel plastic hinges using CFRP
Compos Struct Hankeln 105 340 2013 10.1016/j.compstruct.2013.05.009 A mesoscopic model for deep drawing of carbon fibre prepregs at large strains
Mater Des Ghasemnejad 31 1105 2010 10.1016/j.matdes.2009.09.043 Effect of delamination failure in crashworthiness analysis of hybrid composite box structures
J Mater Process Technol Lee 229 275 2016 10.1016/j.jmatprotec.2015.03.042 The effect process parameters on epoxy flow behavior and formability with CR340/CFRP composites by different laminating in deep drawing process
J Mater Process Technol Hintze 216 199 2015 10.1016/j.jmatprotec.2014.09.004 Influence of weave structure on delamination when milling CFRP
J Mater Sci Technol Zhu 27 1 69 2011 10.1016/S1005-0302(11)60028-5 Influence of voids on the tensile performance of carbon/epoxy fabric laminates
Altan 2004 Cold and hot forging fundamentals and applications
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.