최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the European Ceramic Society, v.37 no.5, 2017년, pp.2303 - 2308
Guo, Hanzheng (Corresponding author.) , Bayer, Thorsten J.M. , Guo, Jing , Baker, Amanda , Randall, Clive A.
Abstract In this communication, the cold sintering process was applied to benefit the green body compaction of 8 mol%Y2O3-stablized ZrO2 ceramics (8Y-YSZ). Compared to conventionally processed ceramics, an enhanced densification behavior was demonstrated in cold sintering related ones following a s...
C.A. Randall, J. Guo, H. Guo, A. Baker, and M.T. Lanagan, Cold Sintering Ceramics and Composites; US Provisional Patent Application 62/234 (2015) 389.
J. Am. Ceram. Soc. Guo 99 3489 2016 10.1111/jace.14554 Cold sintering process: a novel technique for low-temperature ceramic processing of ferroelectrics
Angew. Chem. Int. Ed. Guo 55 11457 2016 10.1002/anie.201605443 Cold sintering: a paradigm shift for processing and integration of ceramics
ACS Nano Guo 10 10606 2016 10.1021/acsnano.6b03800 Protocol for ultralow-temperature ceramic sintering: an integration of nanotechnology and cold sintering process
ACS Appl. Mater. Interfaces Guo 8 20909 2016 10.1021/acsami.6b07481 Hydrothermal-assisted cold sintering process: a new guidance for low temperature ceramic sintering
J. Am. Ceram. Soc. Funahashi 2016 Demonstration of the cold sintering process study for the densification of ZnO ceramics
J. Am. Ceram. Soc. Guo 2016 Cold sintering process: a new era for ceramic packaging and microwave device development
J. Am. Ceram. Soc. Guo 2016 Cold sintering process for ZrO2-based ceramics: significantly enhanced densification evolution in yttria-doped ZrO2
J. Am. Ceram. Soc. Baker 99 3202 2016 10.1111/jace.14467 Utilizing the cold sintering process for flexible-printable electroceramic device fabrication
Adv. Funct. Mater. Guo 26 7115 2016 10.1002/adfm.201602489 Cold sintering process of composites: bridging the processing temperature gap of ceramic and polymer materials
J. Mater. Sci. Lett. Yamasaki 5 355 1986 10.1007/BF01748104 A hydrothermal hot-pressing method: apparatus and application
J. Mater. Sci. Lett. Yanagisawa 13 765 1994 10.1007/BF00461398 Preparation of sintered compacts of anatase by hydrothermal hot-pressing
J. Alloys Compd. Katsuyama 414 215 2006 10.1016/j.jallcom.2005.05.050 Synthesis of NaxCo2O4 by the hydrothermal hot-pressing and its thermoelectric properties
J. Am. Ceram. Soc. Roy 56 549 1973 10.1111/j.1151-2916.1973.tb12410.x Porosity-strength relation in cementitious materials with very high strengths
Mater. Res. Soc. Symp. Proc. Sōmiya 24 255 1984 10.1557/PROC-24-255 Hydrothermal preparation and sintering of fine ceramic powders
J. Am. Ceram. Soc. Toraya 65 c159 1982 10.1111/j.1151-2916.1982.tb10527.x Hydrothermal reaction-sintering of monoclinic HfO2
J. Mater. Sci. Lett. Veloza 18 1811 1999 10.1023/A:1006622616850 Recycling waste glasses by means of the hydrothermal hot pressing method
J. Am. Ceram. Soc. Minh 76 563 1993 10.1111/j.1151-2916.1993.tb03645.x Ceramic fuel cells
J. Am. Ceram. Soc. Cologna 94 316 2011 10.1111/j.1551-2916.2010.04267.x Flash-sintering of cubic yttria-stabilized zirconia at 750 (C for possible use in SOFC manufacturing
Solid State Ionics Badwal 52 23 1992 10.1016/0167-2738(92)90088-7 Zirconia-based solid electrolytes: microstructure, stability and ionic conductivity
J. Mater. Sci. Gibson 33 4297 1998 10.1023/A:1004435504482 Sinterability of commercial 8mol yttria-stabilized zirconia powders and the effect of sintered density on the ionic conductivity
Ceram. Int. Mazaheri 35 13 2009 10.1016/j.ceramint.2007.09.009 Two-step sintering of nanocrystalline 8Y2O3 stabilized ZrO2 synthesized by glycine nitrate process
J. Am. Ceram. Soc. Song 94 1053 2011 10.1111/j.1551-2916.2010.04199.x Two-stage master sintering curve approach to sintering kinetics of undoped and Al2O3-doped 8 mol% yttria-stabilized cubic zirconia
J. Mater. Res. Anselmi-Tamburini 19 3255 2004 10.1557/JMR.2004.0423 Spark plasma sintering and characterization of bulk nanostructured fully stabilized zirconia: part II. Characterization studies
Mater. Sci. Eng. A Mazaheri 492 261 2008 10.1016/j.msea.2008.03.023 Processing of nanocrystalline 8 mol% yttria-stabilized zirconia by conventional, microwave-assisted and two-step sintering
J. Am. Ceram. Soc. Baraki 95 75 2012 10.1111/j.1551-2916.2011.04980.x Effect of electrical field/current on sintering of fully stabilized zirconia
J. Electrochem. Soc. Takeuchi 149 A455 2002 10.1149/1.1456915 Improvement of Mechanical Strength of 8mol% yttria-stabilized zirconia ceramics by spark-plasma sintering
J. Am. Ceram. Soc. Ghosh 90 2015 2007 10.1111/j.1551-2916.2007.01683.x Low-temperature sintering and mechanical property evaluation of nanocrystalline 8 mol% yttria fully stabilized zirconia
J. Am. Ceram. Soc. Janney 75 341 1992 10.1111/j.1151-2916.1992.tb08184.x Microwave sintering of solid oxide fuel cell materials: i zirconia-8 mol% Yttria
J. Am. Ceram. Soc. Sato 68 356 1985 10.1111/j.1151-2916.1985.tb15239.x Transformation of yttria-doped tetragonal ZrO2 polycrystals by annealing in water
J. Am. Ceram. Soc. Murase 66 196 1983 10.1111/j.1151-2916.1983.tb10016.x Role of water vapor in crystallite growth and tetragonal-monoclinic phase transformation of ZrO2
J. Eur. Ceram. Soc. Garmendia 31 1009 2011 10.1016/j.jeurceramsoc.2010.12.029 Zirconia-multiwall carbon nanotubes dense nano-composites with an unusual balance between crack and ageing resistance
Biomaterials Benzaid 29 3636 2008 10.1016/j.biomaterials.2008.05.021
J. Am. Ceram. Soc. Kim 75 716 1992 10.1111/j.1151-2916.1992.tb07865.x Entrapped gas effect in the fast firing of yttria-doped zirconia
J. Am. Ceram. Soc. Garvie 55 303 1972 10.1111/j.1151-2916.1972.tb11290.x Phase analysis in zirconia systems
Ceram. Int. Chen 34 365 2008 10.1016/j.ceramint.2006.10.015 Phase stability, microstructural evolution and room temperature mechanical properties of TiO2 doped 8 mol% Y2O3 stabilized ZrO2 (8Y-CSZ)
J. Alloys Compd. Tekeli 391 217 2005 10.1016/j.jallcom.2004.08.084 Fracture toughness (KIC), hardness, sintering and grain growth behaviour of 8YSCZ/Al2O3 composites produced by colloidal processing
Mater. Sci. Eng. A Kwon 299 185 2001 10.1016/S0921-5093(00)01376-9 Synthesis and properties of cubic zirconia −alumina composite by mechanical alloying
J. Mater. Sci. Winnubst 18 1958 1983 10.1007/BF00554988 Mechanical properties and fracture behaviour of ZrO2-Y2O3 ceramics
Ceram. Int. Liu 30 2269 2004 10.1016/j.ceramint.2004.01.006 Microstructures and mechanical properties of 8Y-FSZ ceramics with BaTiO3 additive
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.