최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Powder technology, v.311, 2017년, pp.357 - 363
Lin, Dongguo (Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, South Korea) , Sanetrnik, Daniel (Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlin, 760 01 Zlin, Czech Republic) , Cho, Hanlyun (Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, South Korea) , Chung, Seong Taek (CetaTech, Inc., TIC 296-3, Sacheon, Gyeongnam, South Korea) , Kwon, Young Sam (CetaTech, Inc., TIC 296-3, Sacheon, Gyeongnam, South Korea) , Kate, Kunal H. (Materials Innovation Guild, Department of Mechanical Engineering, University of Louisville, Louisville, KY, USA) , Hausnerova, Berenika (Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlin, 760 01 Zlin, Czech Republic) , Atre, Sundar V. (Materials Innovation Guild, Department of Mechanical Engineering, University of Louisville, Louisville, KY, USA) , Park, Seong Jin (Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, South Korea)
The rheological and thermal debinding properties of a feedstock play an important role in the molding and debinding stage of powder injection molding (PIM), and can directly determine the quality of final PIM product. This work focuses on the rheological and thermal debinding properties of blended e...
Rare Metals Guo 28 261 2009 10.1007/s12598-009-0052-0 Powder injection molding of pure titanium
Metall. Mater. Trans. A Park 40 215 2009 10.1007/s11661-008-9690-3 Rheological and thermal debinding behaviors in titanium powder injection molding
Powder Metall. Friederici 57 5 2014 10.1179/0032589914Z.000000000154 Metal injection moulding for medical applications
Mater. Sci. Eng. A Obasi 527 3929 2010 10.1016/j.msea.2010.02.070 Influence of processing parameters on mechanical properties of Ti-6Al-4V alloy fabricated by MIM
Trans. Nonferrous Metals Soc. China Wang 23 2605 2013 10.1016/S1003-6326(13)62774-0 Rheological characterization of injection molded titanium alloy powder
Key Eng. Mater. Wang 436 157 2010 10.4028/www.scientific.net/KEM.436.157 Titanium and titanium alloy via sintering of TiH2
Procedia Eng. Mohamad Nor 68 359 2013 10.1016/j.proeng.2013.12.192 Sintering parameter optimization of Ti-6Al-4V metal injection molding for highest strength using palm stearin binder
Powder Metall. Met. Ceram. Froes 46 303 2007 10.1007/s11106-007-0048-y Advances in titanium metal injection molding
German 1997 Injection Molding of Metals and Ceramics
Materials German 6 3641 2013 10.3390/ma6083641 Progress in titanium metal powder injection molding
Powder Technol. Thavanayagam 269 227 2015 10.1016/j.powtec.2014.09.020 Analysis of rheological behavior of titanium feedstocks formulated with a water-soluble binder system for powder injection molding
Polym. Compos. Hausnerova 34 1553 2013 10.1002/pc.22572 Surface structure analysis of injection molded highly filled polymer melts
J. Mech. Sci. Technol. Lin 30 1859 2016 10.1007/s12206-016-0343-y Preparation of Ti-6Al-4V feedstock for titanium powder injection molding
J. Eur. Ceram. Soc. Mannschatz 30 2827 2010 10.1016/j.jeurceramsoc.2010.02.020 Powder-binder separation in injection moulded green parts
Qian 2015 Titanium Powder Metallurgy, Science, Technology and Application
Powder Metall. Fang 57 274 2014 10.1179/1743290114Y.0000000101 Effects of particle characteristics on homogeneity of green bodies in powder injection moulding
Chem. Eng. Res. Des. Bricout 91 2484 2013 10.1016/j.cherd.2013.02.023 Influence of powder characteristics on the behaviour of PIM feedstock
Powder Technol. Hausnerova 237 627 2013 10.1016/j.powtec.2013.01.067 Effect of carbide powder characteristics on the PVT behavior of powder injection molding compounds
Powder Technol. Shivashankar 243 79 2013 10.1016/j.powtec.2013.03.037 The effects of material attributes on powder-binder separation phenomena in powder injection molding
Powder Technol. Sotomayor 200 30 2010 10.1016/j.powtec.2010.02.003 Influence of powder particles size distribution on rheological properties of 316L powder injection moulding feedstocks
Mater. Sci. Eng. C Nyberg 25 336 2005 10.1016/j.msec.2005.04.006 Microstructure and mechanical properties of titanium components fabricated by a new powder injection molding technique
Biomed. Mater. Eng. Gulsoy 24 1861 2014 Particle morphology influence on mechanical and biocompatibility properties of injection molded Ti alloy powder
Chem. Eng. Res. Des. Bricout 91 2484 2013 10.1016/j.cherd.2013.02.023 Influence of powder characteristics on the behavior of PIM feedstock
Int. J. Polym. Anal. Charact. Hausnerova 16 141 2011 10.1080/1023666X.2011.547047 The role of powder particle size distribution in the processability of powder injection molding compounds
Powder Metall. Li 42 86 1999 10.1179/pom.1999.42.1.86 Viscosity and melt rheology of metal injection moulding feedstocks
Mater. Manuf. Process. Enneti 27 103 2012 10.1080/10426914.2011.560233 Review: thermal debinding process in particulate materials processing
Acta Mater. Shi 50 1937 2002 10.1016/S1359-6454(02)00036-8 A diffusion-controlled kinetic model for binder burnout in a powder compact
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.