[논문]Thermal performance of a concrete cask: Methodology to model helium leakage from the steel canister

Penalva, J.; Feria, F.; Herranz, L.E.

doi:10.1016/j.anucene.2017.04.049

Abstract ▼ AI-Helper

Abstract Concrete cask storage systems used in dry storage allocate spent fuel within containers that are usually filled with helium at a certain pressure. Potential leaks from the container would result in a cooling degradation of fuel that might jeopardize fuel integrity if temperature exceeded a...

Abstract Concrete cask storage systems used in dry storage allocate spent fuel within containers that are usually filled with helium at a certain pressure. Potential leaks from the container would result in a cooling degradation of fuel that might jeopardize fuel integrity if temperature exceeded a threshold value. According to ISG-11, temperatures below 673K ensure fuel integrity preservation. Therefore, the container thermal response to a loss of leaktightness is of utmost importance in terms of safety. In this work, a thermo-fluid dynamic analysis of the canister during a loss of leaktightness has been performed. To do so, steady-state and transient Computational Fluid Dynamics (CFD) simulations have been carried out. Likewise, it has been developed two methodologies capable of estimating peak fuel temperatures and heat up rates resulting from a postulated depressurization in a dry storage cask. One methodology is based on control theory and transfers functions, and the other methodology is based on a linear relationship between the inner pressure and the maximum temperature. Both methodologies have been verified through comparisons with CFD calculations. The period of time to achieve the temperature threshold (673K) is a function of pressure loss rate and decay heat of the fuel stored in the container; in case of a fuel canister with 30kW the period of time to reach the thermal limit takes between half day (fast pressure loss) and one week (slow pressure loss). In case of a 15% reduction of the decay heat, the period of time to achieve the thermal limit increase up to a few weeks. The results highlight that casks with heat loads below 20kW would never exceed the thermal threshold (673K). Highlights A thermal analysis of the canister during a loss of leaktightness has been performed. Methodologies that predict fuel temperatures and heat up rates have been developed. Casks with heat loads below 20 kW would never exceed the thermal threshold.

Keyword

참고문헌 (16)

DIN, 1998. DIN EN 1330-8, Zerstorungsfreie Prufung - Terminologie - Teil 8: Begriffe der Dichtheitsprufung; Dreisprachige Fassung.
EPRI, 2011. Welding and Fabrication Influence on Stress Corrosion Cracking (SCC). Lake Louise, Alberta, Canada, ATI-CSC-11.
Hanson, B., Alsaed, H., Stockman, C., Enos, D., Meyer, R., Sorenson, K., 2012. Gap Analysis to Support Extended Storage of used Nuclear Fuel. PNNL-20509.
Nucl. Eng. Des. Heng 213 59 2002 10.1016/S0029-5493(01)00454-X A numerical investigation of natural convection heat transfer in horizontal spent-fuel storage cask

상세보기
Ann. Nucl. Energy Herranz 76 54 2015 10.1016/j.anucene.2014.09.032 CFD analysis of a cask for spent fuel dry storage: model fundamentals and sensitivity studies

상세보기
Holtec International, 2010. FSAR, Final Safety Analysis Report for the HI-STORM 100 Cask System, Holtec Report No. HI-2002444, rev 8. Downloaded from <www.nrc.gov>.
Nucl. Eng. Des. Lee 239 551 2009 10.1016/j.nucengdes.2008.12.015 Thermal-fluid flow analysis and demonstration test of a spent fuel storage system

상세보기
10.1115/PVP2015-45947 Liu Y., Tsai H.-C. Nutt M., 2015. Monitoring Helium Integrity in Welded Canisters. ASME Pressure Vessel and Piping Conference, Boston, MA. July 19-23, 2015.
Ogata 2001 Modern Control Engineering
Nucl. Eng. Des. Takeda 238 1220 2008 10.1016/j.nucengdes.2007.03.037 Development of the detecting method of helium gas leak from canister

상세보기
Toriu D., Ushijima S., Takeda H., 2013 Development of monitoring system of helium leakage from canister. GLOBAL 2013. In: International Nuclear Fuel Cycle Conference - Nuclear Energy at a Crossroads. RN:45085399.
Ann. Nucl. Energy Tseng 38 1088 2011 10.1016/j.anucene.2011.01.001 Thermal design investigation of a new tube-type dry storage system through CFD simulations

상세보기
USNRC, 2003. Spent Fuel Project Office, Interim Staff Guidance N° 11, Revision 3 (ISG-11, rev 3).
USNRC, 2010. Spent Fuel Project Office, Interim Staff Guidance N° 25 (ISG-25).
USNRC, 2014. Best practice guidelines for the use of CFD in Nuclear Reactor Safety Applications. NEA/CSNI/R(2014) 11.
Zigh, A., Solis, J., 2008. Computational Fluid Dynamics Best Practice Guidelines in Analysis of Storage Dry Cask, US Nuclear Regulatory Commission. MS-T10K08.

이 논문을 인용한 문헌

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

[해외논문] Thermal performance of a concrete cask: Methodology to model helium leakage from the steel canister

Abstract ▼ AI-Helper

Keyword

참고문헌 (16)

이 논문을 인용한 문헌

활용도 분석정보

활용도 Top5 논문

관련 콘텐츠

원문 URL 링크

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

[해외논문] Thermal performance of a concrete cask: Methodology to model helium leakage from the steel canister

Abstract ▼ AI-Helper

Keyword

참고문헌 (16)

이 논문을 인용한 문헌

활용도 분석정보

활용도 Top5 논문 더보기

관련 콘텐츠

원문 URL 링크

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

활용도 Top5 논문