최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials science & engineering. properties, microstructure and processing. A, Structural materials, v.700, 2017년, pp.338 - 350
Jahanzeb, Nabeel (Department of Printed Electronics Engineering, Sunchon National University, Sunchon 540-950, Republic of Korea) , Shin, Ji-Hwan (Department of Printed Electronics Engineering, Sunchon National University, Sunchon 540-950, Republic of Korea) , Singh, Jaiveer (Department of Printed Electronics Engineering, Sunchon National University, Sunchon 540-950, Republic of Korea) , Heo, Yoon-Uk (Graduate Institute of Ferrous Technology, POSTECH, Pohang, Republic of Korea) , Choi, Shi-Hoon (Department of Printed Electronics Engineering, Sunchon National University, Sunchon 540-950, Republic of Korea)
The dissimilar weld joints between 316L austenitic stainless steel and SS400 ferritic steel were used to investigate the effect that microstructure exerts on hardness heterogeneity in weld joints. In order to identify the constituent phases and deformation mechanisms in the dissimilar weld joints, m...
J. Mater. Process. Technol. Satyanarayana 160 128 2005 10.1016/j.jmatprotec.2004.05.017 Dissimilar metal friction welding of austenitic-ferritic stainless steels
Mater. Sci. Eng. B Arivazhagan 132 222 2006 10.1016/j.mseb.2006.02.047 High temperature corrosion studies on friction-welded dissimilar metals
J. Mater. Sci. Technol. Jafarzadegan 29 367 2013 10.1016/j.jmst.2013.02.008 Microstructure and mechanical properties of a dissimilar friction stir weld between austenitic stainless steel and low carbon steel
J. Alloy. Compd. Zheng 686 693 2016 10.1016/j.jallcom.2016.06.092 Dissimilar friction stir welding of 6061 Al to 316 stainless steel using Zn as a filler metal
Rev. Adv. Mater. Sci. Mvola 38 125 2014 Dissimilar ferrous metal welding using advanced gas metal arc welding processes
Mater. Charact. Celik 43 311 1999 10.1016/S1044-5803(99)00045-5 Mechanical and structural properties of similar and dissimilar steel joints
Metall. Mater. Trans. A. Laha 43 1174 2012 10.1007/s11661-011-0957-8 A comparision of creep rupture strength of ferritic/austenitic dissimilar weld joints of different grades of Cr-Mo ferritic steels
Kou 2003 Welding Metallurgy
R. Chaudhari, R. Parekh, A. Ingle, Reliability of Dissimilar Metal Joints using Fusion Welding: A Review, In: International Conference Mach. Learn. Electr. Mech. Eng., ICMLEME, Dubai: pp. 98-104, 2014.
Acta Metall. Sin. Khalifeh 26 721 2013 10.1007/s40195-013-0194-9 Dissimilar joining of AISI 304L / St37 steels by TIG welding process
Mater. Res. Pouraliakbar 17 106 2014 10.1590/S1516-14392013005000170 Designing of CK45 carbon steel and AISI 304 stainless steel dissimilar welds
Lippold 2005 Welding Metallurgy and Weldability of Stainless Steels
Met. Mater. Int. Lin 15 507 2009 10.1007/s12540-009-0507-8 Precipitation examination of δ, σ, and γ phases using modified Cr/Ni equivalent ratios during the multipass welding of stainless steels
Mater. Des. Arivazhagan 32 3036 2011 10.1016/j.matdes.2011.01.037 Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
Mater. Des. Chen 44 469 2013 10.1016/j.matdes.2012.08.022 Microstructures and mechanical properties of T92/Super304H dissimilar steel weld joints after high-temperature ageing
Fusion Eng. Des. Fu 98 1968 2015 10.1016/j.fusengdes.2015.06.079 Effect of post-weld heat treatment and neutron irradiation on a dissimilar-metal joint between F82H steel and 316L stainless steel
Mater. Des. Wang 32 831 2011 10.1016/j.matdes.2010.07.012 Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnR
J. Mater. Ramkumar 40 70 2012 10.1016/j.matdes.2012.03.024 Effect of filler materials on the performance of gas tungsten arc welded AISI 304 and Monel 400
Mater. Des. Hajiannia 50 566 2013 10.1016/j.matdes.2013.03.029 Microstructure and mechanical properties of AISI 347 stainless steel / A335 low alloy steel dissimilar joint produced by gas tungsten arc welding
Mater. Sci. Eng. A Ramkumar 638 60 2015 10.1016/j.msea.2015.04.041 Investigations on structure-property relationships of activated flux TIG weldments of super-duplex/austenitic stainless steels
Mater. Des. Feistauer 59 323 2014 10.1016/j.matdes.2014.02.042 Mechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al-Mg alloys for Marine applications
Mater. Sci. Eng. A Mas 667 156 2016 10.1016/j.msea.2016.04.082 Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel
Ultramicroscopy Nowell 103 41 2005 10.1016/j.ultramic.2004.11.012 Orientation effects on indexing of electron backscatter diffraction patterns
Z. Fur Phys. Kurdjumow 64 325 1930 10.1007/BF01397346 Uber den Mechanisms der Stahlhartung
Acta Metall. Bogers 12 1964 10.1016/0001-6160(64)90194-4 Partial dislocations on the {110} planes in the B.C.C. lattice and the transition of the F.C.C. into the B.C.C. lattice
Metall. Trans. A. Olson 7 1897 1976 A general mechanism of martensitic nucleation
Scr. Mater. Lee 43 777 2000 10.1016/S1359-6462(00)00487-5 The morphologies and characteristics of impact-induced martensite in 304L stainless steel
Mater. Sci. Eng. A Das 486 283 2008 10.1016/j.msea.2007.09.005 Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.