최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of alloys and compounds, v.712, 2017년, pp.277 - 287
Jung, Jae-Gil (Implementation Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea) , Lee, Sang-Hwa (Implementation Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea) , Cho, Young-Hee (Implementation Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea) , Yoon, Woon-Ha (Implementation Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea) , Ahn, Tae-Young (Nuclear Materials Safety Research Division, Korea Atomic Energy Research Institute, Daejeon 34057, Republic of Korea) , Ahn, Yong-Sik (Department of Materials Science and Engineering, Pukyong National University, Busan 48513, Republic of Korea) , Lee, Jung-Moo (Implementation Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea)
This paper shows that the addition of transition elements significantly influences the microstructure and tensile properties of Al-12Si alloy cast under ultrasonic melt treatment (UST). The alloys contained primary Si, eutectic Si and a variety of intermetallic compounds (IMCs); the addition of Mn a...
Davies 1993 Aluminum and Aluminum Alloys
Acta Mater Belov 53 4709 2005 10.1016/j.actamat.2005.07.003 Constituent phase diagrams of the Al-Cu-Fe-Mg-Ni-Si system and their application to the analysis of aluminum piston alloys
Mater. Trans. A Gholizadeh 42A 3447 2011 10.1007/s11661-011-0764-2 Investigation of the effects of Ni, Fe, and Mn on the formation of complex intermetallic compounds in Al-Si-Cu-Mg-Ni alloys, Metall
Inter. J. Fatigue Moffat 27 1564 2005 10.1016/j.ijfatigue.2005.06.023 The effect of silicon content on long crack fatigue behavior of aluminum-silicon piston alloys at elevated temperature
Mater. Lett. Qian 62 2146 2008 10.1016/j.matlet.2007.11.035 Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al-Si piston alloy
Mater. Sci. Eng. A Li 527 146 2009 10.1016/j.msea.2009.07.039 Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy
Mater. Sci. Eng. A Li 527 7132 2010 10.1016/j.msea.2010.07.073 Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys
Mater. Des. Yang 33 220 2012 10.1016/j.matdes.2011.06.058 Evolution of nickel-rich phases in Al-Si-Cu-Ni-Mg piston alloys with different Cu additions
Mater. Sci. Eng. A Li 528 4427 2011 10.1016/j.msea.2011.02.047 Supportive strengthening role of Cr-rich phase on Al-Si multicomponent piston alloy at elevated temperature
Mater. Trans. Jeong 53 234 2012 10.2320/matertrans.M2011259 Effect of alloying elements on high temperature mechanical properties for piston alloy
J. Mater. Proc. Tech. Haque 77 122 1998 10.1016/S0924-0136(97)00409-3 Effect of process variables on structure and properties of aluminium-silicon piston alloy
Mater Tech. Manasijević 47 585 2013 Effect of heat treatment on the microstructure and mechanical properties of piston alloys
Mater. Sci. Eng. A Jung 669 187 2016 10.1016/j.msea.2016.05.087 Improved mechanical properties of near-eutectic Al-Si piston alloy through ultrasonic melt treatment
Mater. Trans. A Khalifa 44A 5817 2013 10.1007/s11661-013-1936-z Microstructure and wear behavior of solidification sonoprocessed B390 hypereutectic Al-Si alloy, Metall
J. Alloys Compd. Jung 693 201 2017 10.1016/j.jallcom.2016.09.006 Combined effects of ultrasonic melt treatment, Si addition and solution treatment on the microstructure and tensile properties of multicomponent Al-Si alloys
Mater. Sci. Eng. A Sha 554 142 2012 10.1016/j.msea.2012.06.026 Combined effects of cobalt addition and ultrasonic vibration on microstructure and mechanical properties of hypereutectic Al-Si alloys with 0.7%Fe
Intermetallics Lin 32 176 2013 10.1016/j.intermet.2012.09.001 Effects of ultrasonic vibration and manganese on microstructure and mechanical properties of hypereutectic Al-Si alloys with 2%Fe
AFS Trans. Crosley 74 53 1966 The modification of aluminum-silicon alloys
Acta Metall. Mater. Ho 43 3231 1995 10.1016/0956-7151(94)00480-6 Heterogeneous nucleation of solidification of Si in Al-Si and Al-Si-P alloys
J. Electron Microsc. Nogita 53 361 2004 10.1093/jmicro/dfh048 Aluminium phosphide eutectic grain nucleus in hypoeutectic Al-Si alloys
Sci. Rep. Li 6 2016 Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys
ASTM F76-08 2008 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-crystal Semiconductors
ASTM E8/E8M-13a 2013 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E21-09 2009 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
Saunders 1998 CALPHAD
Ultrason. Sonochem. Dong 31 150 2016 10.1016/j.ultsonch.2015.12.009 Cavitation erosion mechanism of titanium alloy radiation rods in aluminum melt
Scr. Mater Shukla 56 513 2007 10.1016/j.scriptamat.2006.11.028 Study of microstructural evolution in friction-stir welded thin-sheet Al-Cu-Li alloy using transmission-electron microscopy
Met. Mater. Int. Jung 19 147 2013 10.1007/s12540-013-2002-5 Quantitative analyses of dissolution and precipitation kinetics of θ-Al2Cu phase in an Al-6.2Si-2.9Cu alloy using electrical resistivity
Acta Mater Asghar 59 6420 2011 10.1016/j.actamat.2011.07.006 Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Flemings 1974 Solidification Processing
Eskin 1998 Ultrasonic Treatment of Light Alloy Melts
J. Appl. Phys. Hunt 37 254 1966 10.1063/1.1707821 Nucleation of solid in an undercooled liquid by cavitation
J. Cryst. Growth Qian 311 3708 2009 10.1016/j.jcrysgro.2009.04.036 Ultrasonic refinement of magnesium by cavitation: clarifying the role of wall crystals
Trans. Indian Inst. Met. Wang 65 653 2012 10.1007/s12666-012-0194-x Oxidation of aluminium alloy melts and inoculation by oxide particles
J. Cryst. Growth Wang 435 24 2016 10.1016/j.jcrysgro.2015.11.034 Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy
Metall. Mater. Trans. A Komarov 46A 2876 2015 10.1007/s11661-015-2829-0 Industrial application of ultrasonic vibrations to improve the structure of Al-Si hypereutectic alloys: potential and limitations
Acta Mater. Srivastaba 44 2935 1996 10.1016/1359-6454(95)00353-3 Quasicrystals, crystals and multiple twins in rapidly solidified Al-Cr-Si, Al-Mn-Si and Al-Mn-Cr-Si alloys
Acta Metall. Broom 23 537 1975 10.1016/0001-6160(75)90094-2 Plastic deformation, fracture and dislocation structures in the orthorhombic intermetallic phase Al3Ni
Mater. Chem. Phys. Das 125 853 2011 10.1016/j.matchemphys.2010.09.035 Effect of high-intensity ultrasonic irradiation on the modification of solidification microstructure in a Si-rich hypoeutectic Al-Si alloy
J. Alloys Compd. Kotadia 620 1 2015 10.1016/j.jallcom.2014.09.089 Modification of solidification microstructure in hypo- and hyper-eutectic Al-Si alloys under high-intensity ultrasonic irradiation
Metall. Mater. Trans. A Easton 30A 1613 1999 10.1007/s11661-999-0098-5 Grain refinement of aluminum alloys: Part. I. the nucleant and solute paradigms-a review of the literature
Acta. Mater. Fan 84 292 2015 10.1016/j.actamat.2014.10.055 Grain refining mechanism in the Al/Al-Ti-B system
Mater. Sci. Forum Eskin 794-796 101 2014 10.4028/www.scientific.net/MSF.794-796.101 Ultrasonic melt processing: opportunities and misconceptions
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.