[논문]Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis

Ahuja, R.; Sawhney, A.; Arif, M.

doi:10.1016/j.proeng.2017.07.166

Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis 원문보기

Procedia engineering, v.196, 2017년, pp.2 - 10

Ahuja, R. , Sawhney, A. , Arif, M.

Abstract ▼ AI-Helper

The Indian Architectural Engineering and Construction sector is grappling with the adoption of BIM as is evident from a relatively low level of adoption. While there have been sufficient number of successful (and unsuccessful) project level implementations of BIM in India, the maturity level of the overall industry and its constituents remains relatively low. One of the challenges faced, especially at the organizational level, is an understanding and development of the organization's BIM capabilities. These capabilities need attention in terms of their effectiveness and hierarchy of implementation in order to overcome the challenges of adoption and increasing maturity levels in BIM usage. The inability to identify crucial BIM capabilities is one of the primary barriers to ineffective BIM implementation and slow adoption in India. The aim of this study is to investigate the dynamics of different BIM capabilities and to understand how these capabilities can be represented as a set of interrelated elements by adopting Interpretive Structure Modeling (ISM) technique Accordingly, a clear understanding regarding the nature of each BIM capability is developed that will help the organizations to plan the strategic implementation of BIM on any project and gain systematic, logical and productive results. Through the three-phased study, it was concluded that BIM capabilities namely visualization, energy and environment analysis, structural analysis, MEP system modelling, constructability analysis, and BIM for as-built were found to be the independent BIM capabilities having strong driving power but weak dependence power. Facilities management is a dependent BIM capability with weak driving power but strong dependence power. This study provides a roadmap to BIM implementers by highlighting the driving and dependence power of each BIM capability which is deemed useful for enhanced delivery of construction projects. Significant theoretical and practical implications are envisioned for both researchers and project managers through the findings of this study.

주제어

참고문헌 (59)

P. Teicholz, Labor-Productivity Declines in the Construction Industry: Causes and Remedies, AECbytes. (2013) 6. https://aecbytes.wordpress.com/2013/03/14/labor-productivity-declines-in-the-construction-industry-causes-and-remedies/.
K. Bektas, K. Lauche, J. Wamelink, Knowledge sharing strategies for large scale building projects, Delft: Delft University of Technology., 2008.
KPMG, Study on project schedule and cost overruns: Expedite infrastructure projects, 2013. www.kpmg.com/in.
H.F. Lincoln, M.A. Syed, Modern Construction: Lean Project Delivery and Integrated Practices, CRC press, 2011.
10.1002/9781444319675.ch6 W. a. Lichtig, The Integrated Agreement for Lean Project Delivery, Constr. Lawyer. 26 (2006). doi:10.1002/9781444319675.ch6.
A. Weippert, S. Kajewski, AEC industry culture: a need for change, in: Build. Futur. 16th CIB World Build. Congr., CIB in -house publishing, Rotterdam, Netherlan, 2004. http://www.irbnet.de/daten/iconda/CIB10128.pdf.
Y. Arayici, C. Egbu, P. Coates, Building information modelling (BIM) implementation and remote construction projects: Issues, challenges, and critiques, Electron. J. Inf. Technol. Constr. 17 (2012) 75-92. doi:ISSN 1874-4753.
10.1002/9780470261309 C. Eastman, P. Teicholz, R. Sacks, K. Liston, BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, John Wiley & Sons, Inc., Hoboken, NJ, USA, 2008. doi:10.1002/9780470261309.
McGraw Hill Construction, The Business Value of BIM for Owners, Bedford, 2014. http://i2sl.org/elibrary/documents/Business_Value_of_BIM_for_Owners_SMR_(2014).pdf.
10.1016/j.autcon.2014.03.009 R. Miettinen, S. Paavola, Beyond the BIM utopia: Approaches to the development and implementation of building information modeling, Autom. Constr. 43 (2014) 84-91. doi:10.1016/j.autcon.2014.03.009.

상세보기
10.1016/j.ijsbe.2016.10.006 R. Ahuja, A. Sawhney, M. Arif, Driving lean and green project outcomes using BIM: A qualitative comparative analysis, Int. J. Sustain. Built Environ. (2016). doi:10.1016/j.ijsbe.2016.10.006.

상세보기
A. Sawhney, State of BIM Adoption and Outlook in India, RICS School of Built Environment, Amity University, Noida, 2014. http://ricssbe.org/RICSINDIA/media/rics/News/RICS-SBE-Research_State-of-BIM-Adoption.pdf.
McGraw Hill Construction, Building Information Modeling (BIM): Transforming Design and Construction to Achieve Greater Industry Productivity, 2008.
McGraw Hill Construction, The Business Value of BIM: Getting Building Information Modeling to the Bottom Line, New York, 2009. http://images.autodesk.com/adsk/files/final_2009_bim_smartmarket_report.pdf.
McGraw Hill Construction, The Business Value of BIM for Infrastructure Addressing America's Infrastructure Challenges with Collaboration and Technology, 2012.
S. a Bhoir, A. Schwab, B. Esmaeili, P. Goodrum, A Decision-Making Algorithm for Selecting Building Information Modeling Functions, in: 5th Int. Constr. Spec. Conf., 2015: pp. 1-10.
10.1080/17452007.2016.1186589 R. Ahuja, M. Jain, A. Sawhney, M. Arif, Adoption of BIM by architectural firms in India: technology-organization-environment perspective, Archit. Eng. Des. Manag. 12 (2016) 311-330. doi:10.1080/17452007.2016.1186589.

상세보기
N. Raghavan, S. Kalidindi, A. Mahalingam, K. Varghese, A. Ayesha, Implementing lean concepts on Indian construction Sites: Organisational aspects and lessons learned, in: 22nd Annu. Conf. Int. Gr. Lean Constr. June 25-27,Oslo, Norw., 2014: pp. 1181-1190.
R. Sacks, L. Koskela, B.A. Dave, R. Owen, Interaction of Lean and Building Information Modeling in Construction, J. Constr. Eng. Manag. 136 (2010) 968-980. doi:10.1061/(ASCE)CO. 1943-7862.0000203.
D. Forgues, S. Staub-french, S. Tahrani, E. Poirier, The inevitable shift towards Building Information Modeling (BIM) in Canada's construction sector: A three-project summary, 2014. www.cefrio.qc.ca/media/uploader/3_Construction_ICT_final_summary_report_March_20_2014.pdf.
10.1007/s00163-011-0105-x P.E.D. Love, D.J. Edwards, S. Han, Y.M. Goh, Design error reduction: toward the effective utilization of building information modeling, Res. Eng. Des. 22 (2011) 173-187. doi:10.1007/s00163-011-0105-x.

상세보기
R. Ahuja, A. Sawhney, M. Arif, BIM based conceptual framework for lean and green integration, 22nd Annu. Conf. Int. Gr. Lean Constr. June 25-27,Oslo, Norw. 2 (2014) 123-132.
M. Hooper, A. Ekholm, A pilot study: Towards BIM integration - An analysis of design information exchange & coordination, in: Proc. CIB W78 27th Int. Conf. Cairo, Egypt, 16-18 Novemb., 2010.
L. Sabol, Challenges in Cost Estimating with Building Information Modeling, Des. + Constr. Strateg. LLC. (2008). http://www.dcstrategies.net/about.html.
10.1016/j.aei.2007.03.001 R. Howard, B.-C. Bjork, Building Information Modelling - Experts’ views on standardisation and industry deployment, Adv. Eng. Informatics. 22 (2008) 271-280. doi:10.1016/j.aei.2007.03.001.

상세보기
B. Gilligan, J. Kunz, VDC Use in 2007: Significant Value, Dramatic Growth, and Apparent Business Opportunity, Stanford: Stanford University, 2007.
Mckinsey & Company, Building organizational capabilities: McKinsey Global survey results, 2010. http://www.mckinsey.com/business?functions/organization/our?insights/building?organizational?capabilities?mckinsey?global?survey?results.
D. Ulrich, N. Smallwood, Capitalizing on Capabilities, Harv. Bus. Rev. 82 (2004) 1-10.
S. Azhar, A. Nadeem, J.Y. Mok, B.H.Y. Leung, Building Information Modeling (BIM): A New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects, in: 1st Int. Conf. Constr. Dev. Cties. (ICCIDIC), August 4-5, Karachi, Pakistan, 2008.
A. Khanzode, M. Fischer, R. Dean, Benefits and lessons learned of implementing building Virtual Design and Construction (VDC) technologies for coordination of Mechanical, Electrical, and Plumbing (MEP) systems on a large healthcare project, Electron. J. Inf. Technol. Constr. 13 (2008) 324-342.
D. Smith, An Introduction to Building Information Modeling (BIM), J. Build. Inf. Model. (2007). Accessed May 23, 2012. http://www.wbdg.org/pdfs/jbim_fall07.pdf.
S. Gijezen, T. Hartmann, N. Buursema, H. Hendricks, Organizing 3D Building Information Models with the help of work breakdown structures to improve the clash detection process, Netherlands, 2009.
McGraw Hill Construction, SMARTMarket Report on Prefabrication and Modularization: Increasing productivity in the construction industry, 2013. www.construction.com.
V. Hartmann, K.E. Beucke, K. Shapir, M. Konig, Model-based Scheduling for Construction Planning, in: 14th Int. Conf. Comput. Civ. Build. Eng. June 27-29, Moscow, Russ., 2012.
10.1109/WSC.2012.6465232 M. Konig, I. Habenicht, R.-U. Bochum, S. AG, Intelligent BIM based construction scheduling using discrete event simulation, in: Proc. Winter Simul. Conf. December 9-12, Berlin, Ger., 2012: pp. 662-673.
Autodesk, Using Autodesk Ecotect Analysis and Building Information Modeling, 2010. http://www.tpm.com/wp-content/uploads/2013/02/using_autodesk_ecotect_analysis_and_building_information_modeling_final.pdf.
10.22260/ISARC2010/0023 S. Azhar, J.W. Brown, A. Sattineni, A case study of building performance analyses using Building Information Modeling, in: 27th Int. Symp. Autom. Robot. Constr. June 25-27, Bratislava, Slovakia, 2010: pp. 213-222.
10.1016/j.autcon.2008.07.003 A. Schlueter, F. Thesseling, Building information model based energy/exergy performance assessment in early design stages, Autom. Constr. 18 (2009) 153-163. doi:10.1016/j.autcon.2008.07.003.

상세보기
10.1080/15623599.2012.10773184 S. Shrivastava, A. Chinia, Using Building Information Modeling to Assess the Initial Embodied Energy of a Building, Int. J. Constr. Manag. 12 (2012) 51-63. doi:10.1080/15623599.2012.10773184.
10.1016/j.autcon.2004.04.003 H.J. Wang, J.P. Zhang, K.W. Chau, M. Anson, 4D dynamic management for construction planning and resource utilization, Autom. Constr. 13 (2004) 575-589. doi:10.1016/j.autcon.2004.04.003.

상세보기
10.1016/j.autcon.2004.08.011 Z. Ma, Q. Shen, J. Zhang, Application of 4D for dynamic site layout and management of construction projects, Autom. Constr. 14 (2005) 369-381. doi:10.1016/j.autcon.2004.08.011.

상세보기
10.1061/9780784412329.119 B.P. Langroodi, S. Staub-French, Change Management with Building Information Models: A Case Study, in: Constr. Res. Congr. 2012, American Society of Civil Engineers, Reston, VA, 2012: pp. 1182-1191. doi:10.1061/9780784412329.119.
Autodesk, The Power of BIM for Structural Engineering, 2012. http://www.ideateinc.com/products/brochures/2013/structural_engineering_brochure.pdf.
Autodesk, Autodesk Revit Systems: BIM for MEP Engineering Using BIM to Improve MEP Design, 2006. www.autodesk.com/revitsystems.
Autodesk, BIM and Cost Estimating, 2007. http://www.autodesk.com/revit.
10.1016/j.autcon.2013.05.005 A. Monteiro, J. Pocas Martins, A survey on modeling guidelines for quantity takeoff-oriented BIM-based design, Autom. Constr. 35 (2013) 238-253. doi:10.1016/j.autcon.2013.05.005.

상세보기
Autodesk, BIM and Facilities Management, 2007. http://www.autodesk.com/revit.
L. Khemlani, BIM for Facilities management, AECbytes. (2011). http://www.aecbytes.com/feature/2011/BIMforFM.html (accessed March 20, 2014).
L. Sabol, Building Information Modeling & Facility Management, (2008).
M.K. Tauriainen, J.A. Puttonen, A.J. Saari, The assessment of constructability: BIM cases, J. Inf. Technol. Constr. 20 (2015) 51-67.
L. Khemlani, Multi-Disciplinary BIM at Work at GHAFARI Associates, AECbytes. (2006) 1-9. http://arquivo.lusocuanza.com/img/docs/Ghafari_study_pr.pdf.
B. Becerik-gerber, D. Des, D. Kent, Implementation of Integrated Project Delivery and Building Information Modeling on a Small Commercial Project, (2009). https://www.researchgate.net/file.PostFileLoader.html?id=54be37efd5a3f2ac1c8b4642&assetKey=AS: 273679995342849@1442261803620.
T.D. Bennett, BIM and Laser Scanning for As-built and Adaptive Reuse Projects: The Opportunity for Surveyors, Am. Surv. (2009). http://www.amerisurv.com/.
10.1061/41109(373)54 J. Woo, J. Wilsmann, D. Kang, Use of As-Built Building Information Modeling, in: Constr. Res. Congr. 2010, American Society of Civil Engineers, Reston, VA, 2010: pp. 538-548. doi:10.1061/41109(373)54.
10.7763/joebm M. Khalfan, H. Khan, T. Maqsood, Building Information Model and Supply Chain Integration: A Review, J. Econ. Bus. Manag. 3 (2015). doi:10.7763/JOEBM. 2015.V3.308.
D.W. Malone, An introduction to the application of interpretive structural modeling, Proc. IEEE. 63 (1975) 397-404. doi:10.1109/PROC. 1975.9765.
10.1080/14783360500450376 S. Sahney, D.K. Banwet, S. Karunes, An integrated framework for quality in education: Application of quality function deployment, interpretive structural modelling and path analysis, Total Qual. Manag. Bus. Excell. 17 (2006) 265-285. doi:10.1080/14783360500450376.

상세보기
10.1016/j.indmarman.2005.12.004 A. Agarwal, R. Shankar, M.K. Tiwari, Modeling agility of supply chain, Ind. Mark. Manag. 36 (2007) 443-457. doi:10.1016/j.indmarman.2005.12.004.

상세보기
10.1108/01443579410062086 A. Mandal, S.G. Deshmukh, Vender Selection Using Interpretive Structural Modelling (ISM), Int. J. 14 (1994) 52-59. doi:10.1108/01443579410062086.

상세보기

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (59)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트