참고문헌 (37)

1. Y.L. He Y. Zhang Advances and outlooks of heat transfer enhancement by longitudinal vortex generators, 2016, 1602.00323. 

2. Webb 1994 Principle of enhanced heat transfer 

3. A.E. Bergles, R.M. Manglik, Current progress in enhanced heat and mass transfer, 10th international conference on nanochannels, microchannels, and minichannels, Am. Soc. Mech. Engineers, 2012, 115-124. 

4. Exp. Thermal Fluid Sci. Jacobi 11 3 295 1995 10.1016/0894-1777(95)00066-U Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress 

   상세보기

5. Exp. Thermal Fluid Sci. Gentry 14 3 231 1997 10.1016/S0894-1777(96)00067-2 Heat transfer enhancement by delta-wing vortex generators on a flat plate: vortex interactions with the boundary layer 

   상세보기

6. Journal of heat transfer Gentry 124 6 1158 2002 10.1115/1.1513578 Heat transfer enhancement by delta-wing-generated tip vortices in flat-plate and developing channel flows 

   상세보기

7. Int. J. Chem. Eng. Siddique 2010 10.1155/2010/106461 Recent advances in heat transfer enhancements: a review report 

   상세보기

8. Int. J. Heat Fluid Flow Henze 32 1 318 2011 10.1016/j.ijheatfluidflow.2010.07.005 Flow and heat transfer characteristics behind vortex generators-A benchmark dataset 

   상세보기

9. 10.1115/99-GT-255 T.M. Liou, C.C. Chen, T.W. Tsai, Heat transfer and fluid flow in a square duct with 12 different shaped vortex generators, international gas turbine and aeroengine congress and exhibition, Am. Soc. Mech. Engineers (1999). 

   

10. Energy Convers. Manage. Promvonge 51 6 1242 2010 10.1016/j.enconman.2009.12.035 Enhanced heat transfer in a triangular ribbed channel with longitudinal vortex generators 

    상세보기

11. Int. J. Heat Mass Transf. Henze 54 1 279 2011 10.1016/j.ijheatmasstransfer.2010.09.045 Influence of approach flow conditions on heat transfer behind vortex generators 

    상세보기

12. Exp. Thermal Fluid Sci. Akcayoglu 35 1 112 2011 10.1016/j.expthermflusci.2010.08.012 Flow past confined delta-wing type vortex generators 

    상세보기

13. Heat Transfer Eng. Biswas 33 4-5 406 2012 10.1080/01457632.2012.614150 Augmentation of heat transfer by creation of streamwise longitudinal vortices using vortex generators 

    상세보기

14. J. Heat Transf. Song 135 4 041902 2013 10.1115/1.4023037 The effectiveness of secondary flow produced by vortex generators mounted on both surfaces of the fin to enhance heat transfer in a flat tube bank fin heat exchanger 

    상세보기

15. Appl. Therm. Eng. Du 50 1 55 2013 10.1016/j.applthermaleng.2012.05.024 Experimental study on heat transfer enhancement of wavy finned flat tube with longitudinal vortex generators 

    상세보기

16. Int. J. Heat Mass Transf. Du 75 368 2014 10.1016/j.ijheatmasstransfer.2014.03.081 Heat transfer enhancement of wavy finned flat tube by punched longitudinal vortex generators 

    상세보기

17. Int. Commun. Heat Mass Transfer Gong 43 53 2013 10.1016/j.icheatmasstransfer.2013.01.004 Numerical simulation of flow and heat transfer characteristics in wavy fin-and-tube heat exchanger with combined longitudinal vortex generators 

    상세보기

18. Int. Commun. Heat Mass Transf. Promvonge 59 158 2014 10.1016/j.icheatmasstransfer.2014.10.005 Experimental study on heat transfer in square duct with combined twisted-tape and winglet vortex generators 

    상세보기

19. Int. Commun. Heat Mass Transfer Zdanski 67 89 2015 10.1016/j.icheatmasstransfer.2015.07.010 Effects of delta winglet vortex generators on flow of air over in-line tube bank: A new empirical correlation for heat transfer prediction 

    상세보기

20. Int. J. Appl. Comput. Math. Hosseini 1 2016 Influence of different arranges of vortex generators on heat transfer 

21. Appl. Therm. Eng. Hosseini 108 905 2016 10.1016/j.applthermaleng.2016.07.174 Experimental and numerical evaluation of different vortex generators on heat transfer 

    상세보기

22. Int. J. Heat Mass Transf. Sinha 101 667 2016 10.1016/j.ijheatmasstransfer.2016.05.032 Enhancement of heat transfer in a fin-tube heat exchanger using rectangular winglet type vortex generators 

    상세보기

23. Fire Mater. Moghtaderi 21 1 7 1997 10.1002/(SICI)1099-1018(199701)21:1<7::AID-FAM588>3.0.CO;2-T An integral model for the transient pyrolysis of solid materials 

    상세보기

24. Combust. Flame Spearpoint 123 3 308 2000 10.1016/S0010-2180(00)00162-0 Predicting the burning of wood using an integral model 

    상세보기

25. Fire Saf. J. Lautenberger 44 6 819 2009 10.1016/j.firesaf.2009.03.011 Generalized pyrolysis model for combustible solids 

    상세보기

26. J. Spacecraft and Rockets Milos 50 1 137 2013 10.2514/1.A32302 Ablation, thermal response, and chemistry program for analysis of thermal protection systems 

    상세보기

27. J. Thermo Phys. Heat Transf. Alkandry 28 4 569 2014 10.2514/1.T4233 Comparison of Transport Properties Models for Flowfield Simulations of Ablative Heat Shields 

    상세보기

28. Am. Soc. Mech. Engineers Habchi 377 2010 On the correlation between vorticity strength and convective heat transfer, 14th international heat transfer conference 

29. Int. J. Heat Mass Transf. Chang 52 7 1794 2009 10.1016/j.ijheatmasstransfer.2008.09.029 Numerical study of the relationship between heat transfer enhancement and absolute vorticity flux along main flow direction in a channel formed by a flat tube bank fin with vortex generators 

    상세보기

30. K. K. Kuo, Principles of combustion, Wiley Publications, 2005. 

31. Heat and Mass Transf. Menter 4 1 625 2003 Ten years of industrial experience with the SST turbulence model Turbulence 

32. Journal of Computational physics Liou 107 1 23 1993 10.1006/jcph.1993.1122 A new flux splitting scheme 

    상세보기

33. J. Comput. Phys. Liou 129 2 364 1996 10.1006/jcph.1996.0256 A sequel to AUSM: AUSM+ 

    상세보기

34. J. Comput. Phys. Liou 214 1 137 2006 10.1016/j.jcp.2005.09.020 A sequel to AUSM, Part II: AUSM+-UP for all speeds 

    상세보기

35. Ansys Fluent 14.5 release user guide, Ansys Inc, 2012. 

36. AIAA J. Donohue 34 3 455 1996 10.2514/3.13089 Complete three-dimensional multiparameter mapping of a supersonic ramp fuel injector flowfield 

    상세보기

37. Bergman 2011 Fundamentals of heat and mass transfer