참고문헌 (40)

1. Yuan, W., Mishra, R.S., Webb, S., Chen, Y.L., Carlson, B., Herling, D.R., Grant, G.J.. Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds. Journal of materials processing technology, vol.211, no.6, 972-977.

   상세보기

2. Wei, Y., Li, J., Xiong, J., Huang, F., Zhang, F., Raza, S.H.. Joining aluminum to titanium alloy by friction stir lap welding with cutting pin. Materials characterization, vol.71, 1-5.

   상세보기

3. Chowdhury, S.H., Chen, D.L., Bhole, S.D., Cao, X., Wanjara, P.. Lap shear strength and fatigue life of friction stir spot welded AZ31 magnesium and 5754 aluminum alloys. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.556, 500-509.

   상세보기

4. KONISHI, Tokujiro. 車体，車両，機体溶接・接合技術の現状と新しい展開 自動車車体の溶接・接合. 溶接學會誌 = Journal of the Japan Welding Society, vol.74, no.8, 512-515.

   상세보기

5. Khan, M. I., Kuntz, M. L., Su, P., Gerlich, A., North, T., Zhou, Y.. Resistance and friction stir spot welding of DP600: A comparative study. Science and technology of welding and joining, vol.12, no.2, 175-182.

   상세보기

6. Weld. J. Thornton P. 101s 75 1996 

7. Weld. J. Gean A. 80s 78 1999 

   상세보기

8. Iwashita T. ‘Method and apparatus for joining’, US Patent 6601751 B2, 2003. 

9. Thomas W. M., Nicholas E. D., Needham J. C., Murch M. G., Temple-Smith P., and Dawes C. J. ‘Friction stir butt welding’, International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8, 1991. 

10. Shilling C., and dos Santos J. ‘Method and device for linking at least two adjoining work pieces by friction welding’, US Patent 6722556 B2, 2004. 

11. Gerlich, A., Yamamoto, M., North, T.H.. Strain Rates and Grain Growth in Al 5754 and Al 6061 Friction Stir Spot Welds. Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol.38, no.6, 1291-1302.

    상세보기

12. Karthikeyan, R., Balasubramanian, V.. Statistical Optimization and Sensitivity Analysis of Friction Stir Spot Welding Process Parameters for Joining AA 7075 Aluminum Alloy. Experimental techniques, vol.37, no.2, 6-15.

    상세보기

13. Bozkurt, Y., Bilici, M.K.. Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys. Materials & design, vol.51, 513-521.

    상세보기

14. Dinaharan, I., Murugan, N.. Optimization of friction stir welding process to maximize tensile strength of AA6061/ZrB2 in-situ composite butt joints. Metals and materials international, vol.18, no.1, 135-142.

    상세보기

15. Lathabai, S., Painter, M.J., Cantin, G.M.D., Tyagi, V.K.. Friction spot joining of an extruded Al–Mg–Si alloy. Scripta materialia, vol.55, no.10, 899-902.

    상세보기

16. 10.4271/2006-01-0970 

    

17. Shen, Z., Yang, X., Zhang, Z., Cui, L., Yin, Y.. Mechanical properties and failure mechanisms of friction stir spot welds of AA 6061-T4 sheets. Materials & design, vol.49, 181-191.

    상세보기

18. Zhang, Z., Yang, X., Zhang, J., Zhou, G., Xu, X., Zou, B.. Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy. Materials & design, vol.32, no.8, 4461-4470.

    상세보기

19. Badarinarayan, H., Shi, Y., Li, X., Okamoto, K.. Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets. International journal of machine tools & manufacture, vol.49, no.11, 814-823.

    상세보기

20. Tier, M.D., Rosendo, T.S., dos Santos, J.F., Huber, N., Mazzaferro, J.A., Mazzaferro, C.P., Strohaecker, T.R.. The influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium welds. Journal of materials processing technology, vol.213, no.6, 997-1005.

    상세보기

21. Fahimpour, V., Sadrnezhaad, S. K., Karimzadeh, F.. Microstructure and Mechanical Property Change During FSW and GTAW of Al6061 Alloy. Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol.44, no.5, 2187-2195.

    상세보기

22. Wang, D.A., Lee, S.C.. Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets. Journal of materials processing technology, vol.186, no.1, 291-297.

    상세보기

23. Birol, Yucel, Kasman, Sefika. Friction stir welding of twin-roll cast EN AW 3003 plates. Metals and materials international, vol.19, no.6, 1259-1266.

    상세보기

24. Shibayanagi, Toshiya, Gerlich, Adrian P., Kashihara, Keizo, North, Thomas H.. Textures in Single-Crystal Aluminum Friction Stir Spot Welds. Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol.40, no.4, 920-931.

    상세보기

25. Fujimoto, Mitsuo, Watanabe, Daisuke, Abe, Natsumi, Yutaka, Sato S., Kokawa, Hiroyuki. Effects of process time and thread on tensile shear strength of Al alloy lap joint produced by friction stir spot welding. Welding international, vol.24, no.3, 169-175.

    상세보기

26. Wan, L., Huang, Y., Wang, Y., Lv, S., Feng, J.. Friction stir welding of aluminium hollow extrusion: Weld formation and mechanical properties. Materials science and technology : MST : a publication of the Institute of Metals, vol.31, no.12, 1433-1442.

    상세보기

27. Liu, H.J, Fujii, H, Maeda, M, Nogi, K. Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy. Journal of materials processing technology, vol.142, no.3, 692-696.

    상세보기

28. Hu, Z.L., Wang, X.S., Yuan, S.J.. Quantitative investigation of the tensile plastic deformation characteristic and microstructure for friction stir welded 2024 aluminum alloy. Materials characterization, vol.73, 114-123.

    상세보기

29. Pathak, N., Bandyopadhyay, K., Sarangi, M., Panda, Sushanta Kumar. Microstructure and Mechanical Performance of Friction Stir Spot-Welded Aluminum-5754 Sheets. Journal of materials engineering and performance, vol.22, no.1, 131-144.

    상세보기

30. Kang, Suk Hoon, Han, Heung Nam, Oh, Kyu Hwan, Cho, Jae-Hyung, Lee, Chang Gil, Kim, Sung-Joon. Investigation of the material flow and texture evolution in friction-stir welded aluminum alloy. Metals and materials international, vol.15, no.6, 1027-1031.

    상세보기

31. Prangnell, P.B., Heason, C.P.. Grain structure formation during friction stir welding observed by the ‘stop action technique’. Acta materialia, vol.53, no.11, 3179-3192.

    상세보기

32. Simar, A., Brechet, Y., de Meester, B., Denquin, A., Pardoen, T.. Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.486, no.1, 85-95.

    상세보기

33. Olea, C.A.W., Roldo, L., dos Santos, J.F., Strohaecker, T.R.. A sub-structural analysis of friction stir welded joints in an AA6056 Al-alloy in T4 and T6 temper conditions. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.454, 52-62.

    상세보기

34. Dutta, I., Allen, S. M.. A calorimetric study of precipitation in commercial aluminium alloy 6061. Journal of materials science letters, vol.10, no.6, 323-326.

    상세보기

35. Edwards, G.A., Stiller, K., Dunlop, G.L., Couper, M.J.. The precipitation sequence in Al–Mg–Si alloys. Acta materialia, vol.46, no.11, 3893-3904.

    상세보기

36. Chakrabarti, D.J, Laughlin, David E. Phase relations and precipitation in Al–Mg–Si alloys with Cu additions. Progress in materials science, vol.49, no.3, 389-410.

    상세보기

37. Metall. Mater. Trans. Esmaeli S. 751 34 2003 

38. Wu, H.j., Foo, W.j., Gierlotka, W., Chen, S.w., Snyder, G.J.. The microstructure, liquidus projection and thermodynamic modeling of thermoelectric Ag-Pb-Te system. Materials chemistry and physics, vol.141, no.2, 758-767.

    상세보기

39. Sato, Yutaka S., Kokawa, Hiroyuki. Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum. Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol.32, no.12, 3023-3031.

    상세보기

40. Cho, J.-H., Jae Kim, W., Gil Lee, C.. Texture and microstructure evolution and mechanical properties during friction stir welding of extruded aluminum billets. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.597, 314-323.

    상세보기