[논문]Origins and probabilities of MEP and structural design clashes within a federated BIM model

Pä; rn, E.A.; Edwards, D.J.; Sing, Michael C.P.

doi:10.1016/j.autcon.2017.09.010

Origins and probabilities of MEP and structural design clashes within a federated BIM model 원문보기

Automation in construction, v.85, 2018년, pp.209 - 219

Pärn, E.A. (Faculty of Computing, Engineering and the Built Environment, City Centre Campus, Millennium Point, Birmingham B4 7XG, United Kingdom) , Edwards, D.J. (Faculty of Computing, Engineering and the Built Environment, City Centre Campus, Millennium Point, Birmingham B4 7XG, United Kingdom) , Sing, Michael C.P. (Department of Building and Real Estate, 7)

Abstract ▼ AI-Helper

Abstract ‘Design clashes’ encountered during the development of a large multi-storey educational building, awarded under a Joint Contracts Tribunal (JCT) Design and Build contract, are reported upon. The building was developed in Birmingham, UK and the contract value was circa £36 million (UK Sterling, 2015). Members of the project management team (PMT) produced designs that were subsequently integrated by the main contractor into a federated building information modelling (BIM) model; at this stage 404 error clashes were evident between the positions of the mechanical, electrical and plumbing (MEP) designer's and structural designer's building compartments. The contractor deemed that these particular clashes were ‘mission critical’ as previous experience suggested that project costs could spiral uncontrollably if left unabated. Participatory action research was employed to acquire a deeper understanding and knowledge of the clash incidents. Clash data accrued (in mm) was subsequently quantitatively modelled using the probability density function (PDF) and the cumulative distribution function (CDF). Two models produced were the Log Logistic Three Parameter (3P) (using all data including outliers) and Generalized Gamma distribution (excluding outliers). Both models satisfied Anderson-Darling and Kolmogorov-Smirnov goodness of fit tests at α 0.01 and 0.02 levels of significance. Model parameters could be used to forecast similar clashes occurring on future projects and will prove invaluable to PMT members when accurately estimating the time and resource needed to integrate BIM designs. The predictive modelling revealed that 92.98% of clashes reside within the 30–299mm range while the most probable occurrence of a clash overlap resides in a discrete category of 100–199mm. Further qualitative investigation is also conducted to understand why these clashes occurred and propagate ideas about how such may be mitigated. The research concludes on two important points, namely: i) BIM is not a panacea to design related construction project rework and that innovative 21st century digital technologies are hampered by 20th century management practices; and ii) improvements in clash and error mitigation reside in a better understanding of tolerances specified to alleviate the erroneous task of resolving unnecessary clashes. Future research is proposed that seeks to: automate the clash detection management, analysis and resolution process; conduct further investigative analysis of the organizational and human resource management influences impacting upon design clash propagation; and devise and validate new procedural methods to mitigate clash occurrence using a real-life project. Highlights Design clashes that occur within a federated BIM are analysed. Log Logistic (3P) and Generalized Gamma distribution models are produced. Significant challenges for error mitigation in a BIM are reported upon.

주제어

참고문헌 (74)

J. Bus. Res. Edwards 70 391 2016 10.1016/j.jbusres.2016.08.012 Machines, manumission and economic machinations

상세보기
Comput. Hum. Behav. Park 29 1 160 2013 10.1016/j.chb.2012.07.032 An empirical investigation of end-users' switching toward cloud computing: a two factor theory perspective

상세보기
Int. J. Inf. Manag. Lin 32 6 533 2012 10.1016/j.ijinfomgt.2012.04.001 Cloud computing as an innovation: perception, attitude and adoption

상세보기
Int. J. Prod. Econ. Dutta 165 293 2015 10.1016/j.ijpe.2014.12.032 Managing a big data project: the case of Ramco Cements Limited

상세보기
Manyika, J., Chui, M., Brown, B., Bughin, J., Dobbs, R., Roxburgh, C., and Byers, A. H. (2011) Big data: the next frontier for innovation, competition, and productivity. McKinsey Global Institute. Available via: file:///C:/Users/pc%20user/Downloads/MGI_big_data_full_report.pdf (Accessed: November, 2016).
Russom, P. (2013) Managing big data. TDWI best practices report, TDWI research, Vol., No. Available via: https://www.pentaho.com/sites/default/files/uploads/resources/tdwi_best_practices_report-_managing_big_data.pdf pp. 1-40 (Accessed: November, 2016).
Inf. Syst. J. Seddon 2016 How does business analytics contribute to business value?
Inf. Syst. J. Shollo 26 339 2016 10.1111/isj.12071 Towards an understanding of the role of business intelligence systems in oganisational knowing

상세보기
Autom. Constr. Love 56 26 2015 10.1016/j.autcon.2015.04.008 Future proofing PPPs: life-cycle performance measurement and building information modelling

상세보기
J. Constr. Eng. Manag. Park 2016 Framework of automated construction-safety monitoring using cloud-enabled BIM and BLE mobile tracking sensors
Autom. Constr. Oskouiel 65 86 2016 10.1016/j.autcon.2015.12.023 Automated measurement of highway retaining wall displacements using terrestrial laser scanners

상세보기
Adv. Eng. Inform. Teizer 29 2 225 2015 10.1016/j.aei.2015.03.006 Status quo and open challenges in vision-based sensing and tracking of temporary resources on infrastructure construction sites

상세보기
Ben-Alon Vol. 74 12 2017 Simulating the Behavior of Trade Crews in Construction Using Agents and Building Information Modeling, Automation in Construction
Int. J. Proj. Manag. Liu 2016 Understanding effects of BIM on collaborative design and construction: an empirical study in China
Ciribini Vol. 71, Part 1 62 2016 Implementation of an Interoperable Process to Optimize Design and Construction Phases of a Residential Building: A BIM Pilot Project, Automation in Construction
Saf. Sci. Wetzel 89 355 2016 10.1016/j.ssci.2016.07.010 Utilizing six sigma to develop standard attributes for a safety for facilities management (SFFM) framework

상세보기
Adv. Eng. Softw. Love 102 155 2016 10.1016/j.advengsoft.2016.10.007 Systems information modelling: enabling digital asset management

상세보기
Bagwat 193 2016 Clash Detection: A New Tool in Project Management, International Journal of Scientific Research in Science, Engineering and Technology, Vol. 2, No. 4
Autom. Constr. Won 69 34 2016 10.1016/j.autcon.2016.05.022 How to tell if a BIM project is successful: a goal-driven approach

상세보기
J. Constr. Eng. Manag. Li 140 9 2014 10.1061/(ASCE)CO.1943-7862.0000878 Modeling the impact of design rework on transportation infrastructure construction project performance

상세보기
J. Perform. Constr. Facil. Lopez 24 4 399 2010 10.1061/(ASCE)CF.1943-5509.0000116 Design error classification, causation, and prevention in construction engineering

상세보기
Struct. Infrastruct. Eng. Love 9 11 1136 2013 10.1080/15732479.2012.667420 Determining the probability distribution of rework costs in construction and engineering projects

상세보기
J. Oper. Res. Soc. Love 64 8 1231 2013 10.1057/jors.2013.29 Probability distribution fitting of schedule overruns in construction projects

상세보기
J. Constr. Eng. Manag. Love 139 3 321 2013 10.1061/(ASCE)CO.1943-7862.0000575 Determining the probability of project cost overruns

상세보기
J. Perform. Constr. Facil. Love 28 3 518 2014 10.1061/(ASCE)CF.1943-5509.0000439 Probabilistic assessment of design error costs

상세보기
J. Constr. Eng. Manag. Lee 131 8 890 2005 10.1061/(ASCE)0733-9364(2005)131:8(890) Quality and change management model for large scale concurrent design and construction projects

상세보기
Electron. J. Inf. Technol. Constr. Arayici 17 75 2012 Building information modelling (BIM) implementation and remote construction projects: issues, challenges, and critiques
Autom. Constr. Porwal 31 204 2013 10.1016/j.autcon.2012.12.004 Building information modelling (BIM) partnering framework for public contracts

상세보기
Comput. Ind. Merschbrock 73 1 2015 10.1016/j.compind.2015.07.003 Effective digital collaboration in the construction industry - a case study of BIM deployment in a hospital construction project

상세보기
J. Constr. Eng. Manag. Whang 2016 Contractor-led critical design management factors in high-rise building projects involving multinational design teams
J. Infrastruct. Syst. Forcada 2016 Rework in urban renewal projects in Colombia
Adv. Eng. Inform. Solihin 30 2 168 2016 10.1016/j.aei.2016.02.007 A framework for fully integrated building information models in a federated environment

상세보기
Protein Eng. Peansupap 123 370 2015 Evaluating the impact level of design errors in structural and other building components in building construction projects in Cambodia
Autom. Constr. Al Hattab 52 59 2015 10.1016/j.autcon.2015.02.014 Using social network theory and simulation to compare traditional versus BIM-lean practice for design error management

상세보기
J. Prof. Issues Eng. Educ. Pract. Allen 131 4 301 2005 10.1061/(ASCE)1052-3928(2005)131:4(301) Promise and barriers to technology enabled and open project team collaboration

상세보기
Chevalier 2013 Participatory Action Research: Theory and Methods for Engaged Inquiry
Couns. Psychol. Smith 38 8 1115 2010 10.1177/0011000010376416 Best practices in the reporting of participatory action research: embracing both the forest and the trees

상세보기
Environ. Dev. Econ. Mapfumo 5 6 2013 10.1016/j.envdev.2012.11.001 Participatory action research (PAR) as an entry point for supporting climate change adaptation by smallholder farmers in Africa

상세보기
J. Geogr. High. Educ. Pain 37 1 28 2012 10.1080/03098265.2012.696594 Productive tensions - engaging geography students in participatory action research with communities

상세보기
Urban Rev. Kornbluh 47 5 868 2015 10.1007/s11256-015-0337-6 Youth participatory action research as an approach to sociopolitical development and the new academic standards: considerations for educators

상세보기
Ding Vol. 39, No. 3 2700 2012 A Novel Evidential Reasoning Based Method for Software Trustworthiness Evaluation Under the Uncertain and Unreliable Environment, Expert Systems with Applications
Sustain. Sci. Wittmayer 9 4 483 2014 10.1007/s11625-014-0258-4 Action, research and participation: roles of researchers in sustainability transitions

상세보기
J. Facil. Manag. Lam 14 3 249 2016 10.1108/JFM-05-2015-0017 A performance outcome framework for appraising construction consultants in the university sector

상세보기
HM Government. (2012) Final report to government by the procurement/lean client task group. London: Government Construction Strategy. Available via: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/61157/Procurement-and-Lean-Client-Group-Final-Report-v2.pdf (Accessed: November, 2016).
HM Government. (2013) Building information modeling industrial strategy: government and industry in partnership. London: Government Construction Strategy. Available via: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/34710/12-1327-building-information-modelling.pdf (Accessed: November, 2016).
Wheelan 2013 Naked Statistics: Stripping the Dread from the Data
Schiller 2013 Schaum's Outline of Probability and Statistics
Int. J. Psychol. Res. Cousineau 3 1 58 2010 10.21500/20112084.844 Outliers detection and treatment: a review

상세보기
Int. J. Proj. Manag. Bryde 31 7 971 2013 10.1016/j.ijproman.2012.12.001 The project benefits of building information modelling

상세보기
Guo Vol. 127 433 2016 Cost-Effective Energy Saving Measures Based on BIM Technology: Case Study at National Taiwan University, Energy and Buildings
Azhar 241 2011 Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry. Leadership Management in Engineering, Vol. 11, No. 3
Autom. Constr. Wong 57 156 2015 10.1016/j.autcon.2015.06.003 Enhancing environmental sustainability over building life cycles through green BIM: a review

상세보기
Arayici 189 2011 Technology Adoption in the BIM Implementation for Lean Architectural Practice, Building Information Modeling and Changing Construction Practices, Automation in Construction, Vol. 20, No. 2
Autom. Constr. Ham 49 Part B 214 2015 10.1016/j.autcon.2014.07.009 Mapping actual thermal properties to building elements in GBXML-based BIM for reliable building energy performance modeling

상세보기
Constr. Innov. Murphy 14 4 433 2014 10.1108/CI-01-2014-0011 Implementing innovation: a stakeholder competency-based approach for BIM

상세보기
Autom. Constr. Succar 35 174 2013 10.1016/j.autcon.2013.05.016 An integrated approach to BIM competency assessment, acquisition and application

상세보기
Int. J. Proj. Manag. Duffield 34 7 1280 2016 10.1016/j.ijproman.2016.07.001 Application of the systemic lessons learned knowledge model for organisational learning through projects

상세보기
Commun. Educ. Konak 72 11 2014 Using Kolb's experiential learning cycle to improve student learning in virtual compute laboratories
Autom. Constr. Eadie 36 145 2013 10.1016/j.autcon.2013.09.001 BIM implementation throughout the UK construction project lifecycle: an analysis

상세보기
J. Small Bus. Enterp. Dev. Harris 20 1 102 2013 10.1108/14626001311298439 Levels of innovation within SMEs in peripheral regions: the role of business improvement initiatives

상세보기
Constr. Manag. Econ. Khan 34 3 192 2016 10.1080/01446193.2016.1190026 Managing information complexity using system dynamics on construction, projects
Mach. Learn. Bottou 94 2 133 2014 10.1007/s10994-013-5335-x From machine learning to machine reasoning

상세보기
Mach. Learn. Perlich 95 1 103 2014 10.1007/s10994-013-5375-2 Machine learning for targeted display advertising: transfer learning in action

상세보기
Adv. Eng. Inform. Son 29 2 172 2015 10.1016/j.aei.2015.01.009 As-built data acquisition and its use in production monitoring and automated layout of civil infrastructure: a survey

상세보기
Autom. Constr. Solihin 53 68 2015 10.1016/j.autcon.2015.03.003 Classification rules for automated BIM rule checking development

상세보기
Adv. Eng. Inform. Fathi 29 2 149 2015 10.1016/j.aei.2015.01.012 Automated as-built 3D reconstruction of civil infrastructure using computer vision: achievements, opportunities, and challenges

상세보기
Adv. Eng. Inform. Yang 29 2 211 2015 10.1016/j.aei.2015.01.011 Construction performance monitoring via still images, time-lapse photos, and video streams: now, tomorrow, and the future

상세보기
Eastman 2011 BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors
Comput. Aided Des. Chandrasegaran 45 2 204 2013 10.1016/j.cad.2012.08.006 The evolution, challenges, and future of knowledge representation in product design systems

상세보기
Autom. Constr. Han 53 44 2016 10.1016/j.autcon.2015.02.007 Appearance-based material classification for monitoring of operation-level construction progress using 4D BIM and site photologs

상세보기
Autom. Constr. Zhou 22 102 2012 10.1016/j.autcon.2011.07.005 Construction Safety and Digital Design: A Review

상세보기
Young 2009 McGrawHill Smart Market Report The business value of BIM: getting building information modeling to the bottom line
J. Constr. Eng. Manag. Love 13 3 2010 10.1061/(ASCE)CO.1943-7862.0000136 Rework in civil infrastructure projects: determination of cost predictors, ASCE

상세보기
Tatum 1999 MEP Coordination in Building and Industrial Projects, CIFE Work 54, March 1999

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Origins and probabilities of MEP and structural design clashes within a federated BIM model 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (74)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트