다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Infrared physics & technology, v.87, 2017년, pp.1 - 10
Rajic, Nik (Corresponding author.) , Antolis, Cedric
AI-Helper
Abstract An investigation into the noise performance of optical lock-in thermography (OLT) is described. The study aims to clarify the influence of infrared detector type and key inspection parameters such as illumination strength and lock-in duration on the quality of OLT amplitude and phase image...
Quant InfraRed Thermogr J Rajic 11 2 207 2014 10.1080/17686733.2014.962835 A performance comparison between cooled and uncooled infrared detectors for thermoelastic stress analysis
N. Rajic, N. Street, C. Brooks, S. Galea, Full field stress measurement for in situ structural health monitoring of airframe components and repairs, in: EWSHM-7th European Workshop on Structural Health Monitoring.
NDT & E Int Pickering 41 7 501 2008 10.1016/j.ndteint.2008.05.007 Matched excitation energy comparison of the pulse and lock-in thermography nde techniques
Revue gnrale de thermique Wu 37 8 693 1998 10.1016/S0035-3159(98)80047-0 Lock-in thermography for nondestructive evaluation of materials
O. Breitenstein, J. Rakotoniaina, F. Altmann, T. Riediger, M. Gradhand, New developments in ir lock-in thermography, in: Proc. 30th ISTFA, pp. 595-599.
Infrared Phys. Technol. Montanini 53 5 363 2010 10.1016/j.infrared.2010.07.002 Quantitative determination of subsurface defects in a reference specimen made of plexiglas by means of lock-in and pulse phase infrared thermography
Busse 2008 Proceedings and Monographs in Engineering, Water and Earth Sciences Emerging technologies in NDT, Balkema
Eng. Fail. Anal. Meola 13 3 380 2006 10.1016/j.engfailanal.2005.02.007 Non-destructive evaluation of aerospace materials with lock-in thermography
Quant. InfraRed Thermogr. J. Sakagami 7 1 73 2010 10.3166/qirt.7.73-84 Development of self-reference lock-in thermography and its application to remote nondestructive inspection of fatigue cracks in steel bridges
J. Appl. Phys. Busse 71 8 3962 1992 10.1063/1.351366 Thermal wave imaging with phase sensitive modulated thermography
Breitenstein Vol. 10 2010
Infrared Phys. Technol. Liu 53 5 348 2010 10.1016/j.infrared.2010.06.002 Research on thermal wave processing of lock-in thermography based on analyzing image sequences for ndt
10.21611/qirt.1998.023 J. Krapez, Compared performances of four algorithms used for modulation thermography, in: Proceedings of the Eurotherm Seminar, vol. 60, 1998, pp. 7-10.
10.21611/qirt.2010.140 T. Ullmann, R. Aoki, T. Schmidt, Lock-in thermography for process integrated non-destructive evaluation of carbon fibre reinforced aircraft stuctures, in: Proceedings of QIRT 2010, 2010, pp. 781-788.
NDT & E Int. Chatterjee 44 7 655 2011 10.1016/j.ndteint.2011.06.008 A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques
V. Anghel, Applications of lockin thermography in nde of composite materials, in: SISOM 2008 and Session of the Commission of Acoustics, Bucharest, 2008.
Infrared Phys. Technol. Peng 57 89 2013 10.1016/j.infrared.2012.12.010 Lock-in thermographic inspection of squats on rail steel head
10.21611/qirt.2014.032 C. Maierhofer, P. Myrach, H. Steinfurth, M. Reischel, M. Rllig, Development of standards for flash thermography and lock-in thermography, in: 14 th International Conference on Quantitative InfraRed Thermography (QIRT14) University of Bordeaux, Bordeaux, 2014.
Annu. Rev. Mater. Res. Holland 46 287 2016 10.1146/annurev-matsci-070115-032014 Material evaluation by infrared thermography
W. Larbi, C. Ibarra-Castanedo, M. Klein, A. Bendada, X. Maldague, Experimental comparison of lock-in and pulsed thermography for the nondestructive evaluation of aerospace materials, in: 6 th International Workshop, Advances in Signal Processing for Non Destructive Evaluation of Materials (IWASPNDE), 2009.
Ang 1975 Probability Concepts in Engineering Planning and Design: Basic principles, Probability Concepts in Engineering Planning and Design
A615 technical specifications, FLIR Systems, <http://www.flir.com.au/automation/display/?id=41330> [accessed: 12 December 2016].
A65 technical specifications, FLIR Systems, <http://www.flir.com.au/automation/display/?id=56341> [accessed: 12 December 2016].
Gobi-640-GigE camera specifications, Xenics, <http://www.xenics.com/en/gobi-640-gige> [accessed: 12 December 2016].
X6580sc technical specifications, FLIR Systems, <http://www.flir.eu/science/display/?id=67896> [accessed: 12 December 2016].
Quantit InfraRed Thermogr J Rajic 10 2 135 2013 10.1080/17686733.2013.800688 Thermoelastic stress analysis with a compact low-cost microbolometer system
J. Appl. Phys. Parker 32 9 1679 1961 10.1063/1.1728417 Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity
10.21611/qirt.2008.12_11_16 M. Susa, X. Maldague, S. Svaic, I. Boras, A. Bendada, The influence of surface coatings on the differences between numerical and experimental results for samples subject to a pulse thermography examination, in: 9th International Conference on Quantitative InfraRed Thermography, Krakow, Poland, QIRT, 2008, pp. 10-16.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.