최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Ceramics international, v.44 no.2, 2018년, pp.2223 - 2230
Jung, Yeon-Gil (School of Materials Science and Engineering, Changwon National University) , Tumenbayar, Erdenechuluun (School of Materials Science and Engineering, Changwon National University) , Choi, Hyeun-Hee (School of Materials Science and Engineering, Changwon National University) , Park, Hye-Young (School of Materials Science and Engineering, Changwon National University) , Kim, Eun-Hee (School of Materials Science and Engineering, Changwon National University) , Zhang, Jing (Department of Mechanical Engineering, Indiana University-Purdue University Indianapolis)
Abstract A new ternary-phase binder system incorporating alumina (Al2O3) precursors was successfully developed through process control to improve the sand mold's strength for casting of large objects. Three types of Al2O3 precursors with different molecular structures, such as Al(OH)3, Al(OEt)3, an...
Appl. Clay Sci. Saikaew 67 26 2012 10.1016/j.clay.2012.07.005 Optimization of molding sand composition for quality improvement of iron castings
Metall. Mater. Trans. Meng 34B 707 2003 10.1007/s11663-003-0041-x Modeling transient slag-layer phenomena in the shell/mold gap in continuous casting of steel
Mater. Designs imir 30 264 2009 10.1016/j.matdes.2008.04.074 An investigation into stainless-steel/structural-alloy-steel bimetal produced by shell mould casting
J. Mater. Process. Technol. Jiang 189 247 2007 10.1016/j.jmatprotec.2007.01.030 Dimensional variations of castings moulds in the ceramic mould casting process mater
Ceram. Int. Saridikmen 31 873 2005 10.1016/j.ceramint.2004.10.004 Properties of ceramic casting molds produced with two different binders
J. Mater. Process. Technol. Dong 244 190 2017 10.1016/j.jmatprotec.2017.01.005 Modeling of shrinkage during investment casting of thin-walled hollow turbine blades
Foundry Manag. Technol. Sasaki 137 21 2009 A revolutionary inorganic core and mold making process
Callister 1997 Materials Science and Engineering: An Introduction
Barsoum 1997 Fundamentals of Ceramics
Ege 1994 Organic Chemistry
Arch. Metall. Mater. Izdebska-Szanda 59 1033 2014 10.2478/amm-2014-0173 The effect of nanostructure modification on the silicate binder on its binder characteristics and functional properties
Mater. Lett. Shi 63 527 2009 10.1016/j.matlet.2008.11.029 Synthesis of SiO2-polyacrylic acid hybrid hydrogel with high mechanical properties and salt tolerance using sodium silicate precursor through sol-gel process
J. Alloy. Compd. Chen 478 411 2009 10.1016/j.jallcom.2008.11.050 Preparation of silicate stalagmite from sodium silicate
2012 NCB (Nagai Cerabeads) Technical Brochure 〈http://www.itc-cera.co.jp〉.
J. Mater. Sci. Zhang 42 6798 2007 10.1007/s10853-006-1402-z Mechanical properties and microstructure of Al2O3/mullite composite
Ceram. Int. Lay 35 1961 2009 10.1016/j.ceramint.2008.10.035 Characteristics of silicate glasses derived from vitrification of manganese crust tailings
Eur. Polym. J. Sahoo 44 3522 2008 10.1016/j.eurpolymj.2008.08.033 Synthesis of poly (butyl acrylate)/sodium silicate nanocomposite fire retardant
Mater. Chem. Phys. Sandhu 115 783 2009 10.1016/j.matchemphys.2009.02.032 Neutron irradiation effects on optical and structural properties of silicate glasses
J. Eur. Ceram. Soc. Kim 31 1581 2011 10.1016/j.jeurceramsoc.2011.03.013 A new in situ process in precision casting for mold fabrication
Mater. Chem. Phys. Kim 126 344 2011 10.1016/j.matchemphys.2010.11.015 A new binder system for preparing high strength inorganic molds in precision casting
Ceram. Int. Kim 39 8 9041 2013 10.1016/j.ceramint.2013.04.107 Development of a new process in high functioning ceramic core without shape deformation
J. Nanosci. Nanotechnol. KIM 14 10 2014 Adhesion phenomena between particles according to the content of organic binder in core for thin-wall casting
LeRoy D. Hart (Editor), Esther Lense (Editor), Alumina Chemicals: Science and Technology Handbook Hardcover, Wiley-American Ceramic Society; 1 edition (May 28, 1990).
J. Alloy. Compd. Gurav 476 397 2009 10.1016/j.jallcom.2008.09.029 Physical properties of sodium silicate based silica aerogels prepared by single step sol-gel process dried at ambient pressure
Chem. Eng. J. Anbia 150 555 2009 10.1016/j.cej.2009.02.023 Synthesis of amino-modified ordered mesoporous silica as a new nano sorbent for removal of chlorophenols from aqueous media
Acta Biomater. Xue 5 1686 2009 10.1016/j.actbio.2009.01.012 Mesoporous calcium silicate for controlled release of bovine serum albumin protein
C. Jeffrey Brinker, George W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing 1st Edition, Academic Press; 1 edition (May 12, 1990).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.