참고문헌 (47)

1. ASM Handbook 2006 Forming of Advanced High Strength Steels 

2. Horvath, C. D., and Fekete, J. R., 2004, “Opportunities and Challenges for Increased Usage of Advanced High Strength Steels in Automotive Applications,” International Conference on Advanced High Strength Steels for Automotive Applications Proceedings, Golden, CO, June 6-9, Association of Iron and Steel Engineers, Warrendale, PA. 

3. Advanced High Strength Steel (AHSS) Application Guidelines: Version 4.1 2009 

4. Mater. Charact. 35 3 1995 10.1016/1044-5803(95)00063-1 Lightweight Materials for Automotive Applications 

   상세보기

5. 2008 50 Year Perspective of Automotive Engineering Body Materials and an Analysis of the Future 

6. Welding Rev. Int. 125 1995 The Dominant Material for the Automotive Industry 

7. 2009 Metallic Material Trends for North American Light Vehicles 

8. SAE 1968 Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop 

9. SAE 1969 Circular Grid System-A Valuable Aid for Evaluation Sheet Forming 

10. ASM Trans. Q. 56 11 25 1964 Plastic Instability and Fracture in Sheets Stretched Over Rigid Punches 

11. Int. J. Mech. Sci. 9 609 1967 10.1016/0020-7403(67)90066-5 Limit Strains in the Process of Stretch Forming Sheet Metal 

    상세보기

12. J. Mater. Process. Technol. 83 223 1998 10.1016/S0924-0136(98)00066-1 A Comparative Study of the Forming-Limit Diagram Models for Sheet Steels 

    상세보기

13. 167 1989 

14. Ann. Rev. Mater. Sci. 11 505 1981 10.1146/annurev.ms.11.080181.002445 Formability Maps 

    상세보기

15. Metall. Trans. A 21A 87 1990 Calculations of Forming Limit Diagrams 

16. J. Mater. Process. Technol. 1 2001 Factors Influencing the FLD of Automotive Sheet Metal 

17. 2003 Formability Characterization of a New Generation of High Strength Steels 

18. Advanced High-Strength Steels: Fundamental Research Issues 2006 

19. SAE 2006 A Failure Criterion for Stretch Bendability of Advanced High Strength Steels 

20. 2006 Challenges for Constitutive Models for Forming of Advanced Steels 

21. 809 2009 Sheet Metal Shearing and Edge Characterization of Dual Phase Steels 

22. Interlaken 91 2008 Analysis of Deformation in the Shear and Shear-Tension Tests 

23. SAE 2006 Shear Fracture in Advanced High Strength Steels 

24. 307 2008 On the Failure of AHSS at Tooling Radius 

25. 449 2009 Failure Analysis of Advanced High Strength Steels (AHSS) During Draw Bending 

26. Damborg, F. F., 1998, “Bending-Under-Tension Formability,” Ph.D. thesis, Aalborg University, Aalborg, Denmark. 

27. 2008 Predicting Fracture of AHSS Sheets on the Punch and Die Radii and Sidewall 

28. 145 2007 The Susceptibility to Shear Fracture in Bending of Advanced High Strength Sheet Steels 

29. AIP Conf. Proc. 1 63 2010 Predicting Shear Failure of Dual-Phase Steels 

30. Acta Mater. 57 2592 2009 10.1016/j.actamat.2009.02.020 Microstructure-Based Constitutive Modeling of TRIP Steel: Prediction of Ductility and Failure Modes Under Different Loading Conditions 

    상세보기

31. Int. J. Plast. 27 1658 2011 10.1016/j.ijplas.2011.02.009 The Shear Fracture of Dual-Phase Steel 

    상세보기

32. Krempaszky, C., Ocenasek, J., Espinoza, V., Werner, E., Hebesberger, T., and Pichler, A., 2007, “Micromechanical Modeling of the Formability of Dual-Phase Steels,” MS&T Conference, Detroit, MI, September 16-20, pp. 31-43. 

33. Steel Res. Int. 78 348 2007 10.1002/srin.200705902 Effects of Strain Rate and Identification of Material Constants for Three Automotive Steels 

    상세보기

34. Int. J. Plast. 26 1746 2010 10.1016/j.ijplas.2010.02.005 A Plastic Constitutive Equation Incorporating Strain, Strain-Rate, and Temperature 

    상세보기

35. J. Mater. Process. Technol. 210 5 741 2010 10.1016/j.jmatprotec.2009.12.012 Prediction Instability at Die Radii in Advanced High Strength Steels 

    상세보기

36. 10.1115/MSEC2009-84070 Shih, H. C., Shi, M. F., Xia, Z. C., and Zeng, D., 2009, “Experimental Study on Shear Fracture of Advanced High Strength Steels: Part II,” ASME 2009 International Conference on Manufacturing Science and Engineering (MSEC 2009), West Lafayette. IN, October 4-7, ASME Paper no. MSEC2009-84070, pp. 513-519.10.1115/MSEC2009-84070 

    

37. J. Appl. Metalworking 2 1 3 1981 10.1007/BF02833993 The Stretch-Bend Forming of Sheet Metal 

    상세보기

38. Narayanaswamy, O. S., and Demeri, M. Y., 1983, “Analysis of the Angular Stretch Bend Test: Novel Techniques in Metal Deformation Testing,” The Metallurgical Society, St. Louis, MO, pp. 99-112. 

39. The Physical Metallurgy of Zinc Coated Steel 295 1993 Frictional Response of Electro-Galvanized Sheet Steels 

40. J. Mater. Eng. Perform. 1 685 1992 10.1007/BF02649250 Application of the Bending-Under-Tension Friction Test to Coated Sheet Steels 

    상세보기

41. J. Mater. Eng. Perform. 1 609 1992 10.1007/BF02649242 A New Procedure for the Bending Under Tension Friction Test 

    상세보기

42. GMNA 2007 

43. 2009 

44. Steel Res. Int. 80 71 2009 Hole Expansion of Dual-Phase and Complex-Phase AHS Steels-Effect of Edge Conditions 

45. SAE 2007 Prediction of Stretch Flangeability Limits of Advanced High Strength Steels Using Hole Expansion Test 

46. Sung, J., 2010, “The Causes of “Shear Fracture” of Dual-Phase Steels,” Ph.D. thesis, Ohio State University, Columbus, OH. 

47. 2009 Material Property and Formability Characterization of Various High Strength Dual Phase Steels