최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites science and technology, v.156, 2018년, pp.8 - 18
Serna Moreno, M.C. (Corresponding author.) , Horta Muñoz, S. , Romero Gutiérrez, A. , Rappold, C. , Martínez Vicente, J.L. , Morales-Rodríguez, P.A. , López Cela, J.J.
Abstract Pseudo-ductility could be sought in composite structures to avoid their brittle behaviour and, consequently, to withstand higher levels of external loading due to an extended non-linear response. This mechanism has been deeply examined in the literature for angle-ply laminates submitted to...
Black
Ridruejo
Callister 2007 Materials Science and Engineering
ASTM D3518 2007 Standard Test Method for In-plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
Composites Part A Fuller 69 64 2015 10.1016/j.compositesa.2014.11.004 Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates
Compos. Sci. Technol. Fuller 112 8 2015 10.1016/j.compscitech.2015.02.019 Exploration of the potential for pseudo-ductility in thin ply CFRP angle-ply laminates via an analytical method
Serna Moreno 2017 Flexion en materiales compuestos con distinta respuesta a traccion y a compresion
J. Compos. Mater. Mujika 46 3 259 2011 10.1177/0021998311412636 A novel approach for the three-point flexure test of multidirectional laminates
Polym. Test. Vargas 30 204 2011 10.1016/j.polymertesting.2010.11.008 Determination of in-plane shear properties by three-point flexure test of ±45° anti-symmetric laminates
Halpin 1992 Primer on Composite Materials Analysis
Hyer 1998 Stress Analysis of Fiber-reinforced Composites
Jones 1999 Mechanics of Composite Materials
Compos. Struct. Serna Moreno 136 706 2016 10.1016/j.compstruct.2015.06.017 Different response under tension and compression of unidirectional carbon fibre laminates in a three-point bending test
Compos. Struct. Serna Moreno 146 62 2016 10.1016/j.compstruct.2016.03.003 First flexural and interlaminar shear failure in symmetric cross-ply carbon-fibre laminates with different response under tension and compression
IOP Conf. Ser. Mater. Sci. Eng. Serna Moreno 139 2016 Flexural testing on carbon fibre laminates taking into account their different behaviour under tension and compression
Law 2000 Simulation Modeling and Analysis
Martinez Vicente 2016 Estados de tension y de deformacion en materiales compuestos reforzados con fibra ante diferentes casos de carga
Hexcel Resources
J. Compos. Mater. Jones 10 342 1976 10.1177/002199837601000407 Apparent flexural modulus and strength of multimodulus materials
Polym. Test. Mujika 25 766 2006 10.1016/j.polymertesting.2006.05.003 Determination of tensile and compressive moduli by flexural tests
Polym. Test. Carbajal 28 150 2009 10.1016/j.polymertesting.2008.11.003 Determination of compressive strength of unidirectional composites by three-point bending tests
Garrido 1994 Resistencia de Materiales
ASTM D7264/D7264M-07 2007 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
J. Compos. Mater. Dvorak 21 4 309 1987 10.1177/002199838702100402 Analysis of progressive matrix cracking in composite laminates ii. First ply failure
Composites Part A Camanho 37 2 165 2006 10.1016/j.compositesa.2005.04.023 Prediction of in situ strengths and matrix cracking in composites under transverse tension and inplane shear
Composites Wisnom 26 25 1995 10.1016/0010-4361(94)P3626-C The effect of fibre rotation in ±45 tension tests on measured shear properties
Compos. Sci. Technol. Herakovich 60 2781 2000 10.1016/S0266-3538(00)00091-9 Damage evolution in [±45]s laminates with fiber rotation
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.