최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of manufacturing processes, v.31, 2018년, pp.859 - 866
Kumar, Ravinder (Corresponding author.) , Agrawal, Pramod Kumar , Singh, Inderdeep
Abstract Carbon fiber reinforced plastics (CFRPs) are being used in various applications due to their light weight and good mechanical properties. However, the machinability of CFRPs is not good owing to machining induced damage. Moreover, the machining of micro features in CFRP products is a chall...
J Manuf Process Sanda 22 169 2016 10.1016/j.jmapro.2016.03.003 Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V
J Manuf Process Madhavan 20 431 2015 10.1016/j.jmapro.2014.06.001 Fiber orientation angle effects in machining of unidirectional CFRP laminated composites
Proc IMechE Part B: J Eng Manuf Gil 228 553 2014 10.1177/0954405413502024 Modeling recast layer and surface finish in the manufacturing of high - aspect ratio micro-tools using the inverse slab electrical discharge milling process
J Mater Process Technol Chen 229 253 2016 10.1016/j.jmatprotec.2015.09.025 Development of an in-situ high-precision micro-hole finishing technique
Mater Manuf Process Liu 31 391 2016 10.1080/10426914.2015.1059448 Effect of electrode size on the performances of micro-EDM
Mater Manuf Process Al-Ahmari 31 447 2016 10.1080/10426914.2015.1019102 A hybrid machining process combining micro-EDM and laser beam machining of nickel - titanium- based shape memory alloy
Int J Mach Tools Manuf Lau 30 297 1990 10.1016/0890-6955(90)90138-9 Electrical discharge machining of carbon fibre composite materials
Wang 65 2010 Proceedings of the 16th International Symposium on Electromachining EDM characteristics of carbon fiber reinforced plastic
Int J Mach Mach Mater Gourgouletis 10 187 2011 Electrical discharge drilling of carbon fibre reinforced composite materials
J Mach Manuf Autom Habib 3 22 2014 Modeling of electrical discharge machining of CFRP material through artificial neural network technique
Int J Mech Eng Tech Lodhi 5 70 2014 Optimization of machining parameters in EDM of CFRP composite using Taguchi technique
Appl Mech Mater Korlos 657 321 2014 10.4028/www.scientific.net/AMM.657.321 Investigation of the electro-discharge open-hole machining on the structural behavior of carbon fiber reinforced polymers
Mater Manuf Process Sheikh-Ahmad 31 941 2016 10.1080/10426914.2015.1048368 Hole quality and damage in drilling carbon/epoxy composites by electrical discharge machining
Int J Mach Mach Mater Sheikh-ahmad 18 3 2016 Machinability of carbon/epoxy composites by electrical discharge machining
Int J Mach Mach Mater Habib 13 414 2013 Effect of cutting direction on machining of carbon fibre reinforced plastic by electrical discharge machining process
J Micromech Microeng Whitney 21 1 2011 10.1088/0960-1317/21/11/115021 Pop-up book MEMS
Sensors Ramakrishnan 16 1 2016 10.3390/s16010099 Overview of fiber optic sensor technologies for strain / temperature sensing applications in composite materials
Procedia CIRP Teicher 6 320 2013 10.1016/j.procir.2013.03.092 Micro-EDM of carbon fibre-reinforced plastics
Park 2015 Copenhagen. 19-24th July Microhole machining on precision CFRP components using electrical discharging machining
Proc IMechE, Part B: J Eng Manuf Kumar 231 1775 2017 10.1177/0954405415611360 Electric discharge sawing of hybrid metal matrix composites
Ross 1989 Taguchi Techniques for Quality Engineering
Measurement Mandal 44 2149 2011 10.1016/j.measurement.2011.07.022 Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool : Taguchi method and regression analysis
Precis Eng Kumar 51 529 2017 10.1016/j.precisioneng.2017.10.008 Productivity improvement of micro EDM process by improvised tool
Mater Manuf Process Kumar 32 127 2017 10.1080/10426914.2016.1198012 Electric discharge hole grinding in hybrid metal matrix composite
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.