다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Tribology international, v.119, 2018년, pp.419 - 435
Hammami, Maroua (INEGI, Universidade do Porto, Campus FEUP) , Martins, Ramiro (INEGI, Universidade do Porto, Campus FEUP) , Fernandes, Carlos (INEGI, Universidade do Porto, Campus FEUP) , Seabra, Jorge (FEUP, Universidade do Porto) , Abbes, Mohamed Slim (Unit of Mechanics, Modelling and Manufacturing, National Engineers School of Sfax, University of Sfax) , Haddar, Mohamed (Unit of Mechanics, Modelling and Manufacturing, National Engineers School of Sfax, University of Sfax)
AI-Helper
Abstract As a part of the main research project within the aim of increasing significantly drive axle efficiency, this work focuses on rolling bearing friction torque lubricated with five fully formulated axle gear oils with different viscosity and different formulations. The lubricant tribological...
Appl Mech Mater Joachim 86 883 2011 10.4028/www.scientific.net/AMM.86.883 Reduction of power losses in transmissions and gearings
Joachim 1398 2014 Encyclopedia of lubricants and lubrication Power losses in transmissions, axles, and steering systems
J Mech Des Xu 134 5 054501 2012 Effects of bearing preload, oil volume, and operating temperature on axle power losses
Katoh 1983 Exact measurement of power loss in automotive transmission and axle for fuel economy
Ko 1984 Measurements of power losses in automobile drive train
Bala 2000 Rheological properties affecting the fuel economy of multigrade automotive gear lubricants
Industrial Lubr Tribol Bala 52 4 165 2000 10.1108/00368790010333610 Fuel economy of multigrade gear lubricants
Bjornen 2003 Development of a fuel efficient multipurpose 75w-90 gear lubricant
Porrett 1980 Development of a laboratory axle efficiency test
Hurley 2009 An experimental investigation of thermal behavior of an automotive rear axle
Tribol Trans Talbot 1 2016 Development and validation of an automotive axle power loss model
Mech Mach Theory Kolivand 45 11 1568 2010 10.1016/j.mechmachtheory.2010.06.015 Prediction of mechanical gear mesh efficiency of hypoid gear pairs
Kolekar 2013 Lubrication & efficiency of rear wheel drive axles in road vehicles
10.4271/2014-01-2799 Evans, SD. Delivering axle efficiency and fuel economy through optimised fluid design, SAE Technical PaperHttp://dx.doi.org/10.4271/2014-01-2799.
Tribol Trans Johnston 34 2 187 1991 10.1080/10402009108982026 The measurement and study of very thin lubricant films in concentrated contacts
J Tribol Guangteng 122 1 65 2000 Lubricant film thickness in rough surface, mixed elastohydrodynamic contact
Hohn, BR, Michaelis, K, Vollmer, T, Thermal rating of gear drives: balance between power loss and heat dissipation, AGMA Technical Paper.
Goriva i maziva Hohn 48 4 462 2009 Optimization of gearbox efficiency
Industrial Lubr Tribol Seabra 63 1 46 2011 10.1108/00368791111101830 Influence factors on gearbox power loss
J Sound Vib Cheng 240 3 519 2001 10.1006/jsvi.2000.3247 Vibration analysis of hypoid transmissions applying an exact geometry-based gear mesh theory
J Mech Des Cheng 125 2 373 2003 Dynamics of hypoid gear transmission with nonlinear time-varying mesh characteristics
J Sound Vib Wang 308 1 302 2007 10.1016/j.jsv.2007.07.042 Dynamics of a hypoid gear pair considering the effects of time-varying mesh parameters and backlash nonlinearity
Proc. Inst. Mech. Eng, Part K. J Multi-body Dyn Xu 221 3 387 2007 Prediction of friction-related power losses of hypoid gear pairs
Spindler 2003 Angular contact ball bearings for a rear axle differential
Matsuyama 2004 Development of super-low friction torque tapered roller bearing for improved fuel efficiency
Hosokawa 2009 Double row regular contact ball bearing for axle drives
Lin 2005 Seal friction effect on drive axle efficiency
Tribol Int Kolekar 59 0 203 2013 10.1016/j.triboint.2012.03.013 The efficiency of a hypoid axle a thermally coupled lubrication model
J Mech Des Changenet 130 6 062603 2008 Housing influence on churning losses in geared transmissions
Tribol Int Fernandes 88 298 2015 10.1016/j.triboint.2014.11.017 Gearbox power loss. part i: losses in rolling bearings
Lubr Sci Cousseau 22 4 133 2010 10.1002/ls.115 Experimental measuring procedure for the friction torque in rolling bearings
ATZ Worldw von Petery 106 12 11 2004 10.1007/BF03224703 Fuel economy by custom-made: bearings for differentials from bmw
SKF 2013 Skf rolling bearings general catalogue
Tribol Int Hammami 2017 Axle gear oils: friction, wear and tribofilm generation under boundary lubrication regime
10.1002/jsl.3000180105 Gold, JW, Schmidt, A, dicke, H, Loos, H, Aßmann, C.. Viscosity-pressure-temperature behaviour of mineral and synthetic oils, J Synthetic Lubr 18(1).
Tribol Int Hammami 106 109 2017 10.1016/j.triboint.2016.05.051 Axle gear oils: tribological characterization under full film lubrication
Eschmann 1985 Ball and roller bearings - theory, design and applications
Hamrock 386 1981 Ball bearing lubrication
Dowson 1977 Elastohydrodynamic lubrication
Tribol Int Fernandes 58 47 2013 10.1016/j.triboint.2012.09.005 Friction torque of thrust ball bearings lubricated with wind turbine gear oils
J Mech Eng Sci Dowson 1 1 6 1959 10.1243/JMES_JOUR_1959_001_004_02 A numerical solution to the elasto-hydrodynamic problem
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.