최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Advances in civil engineering materials, v.2 no.1, 2013년, pp.20120014 -
Payrow, Pouria (Nixaz Consulting, Toronto, ON, CA M5B 2H5.) , Nokken, Michelle R. (Dept. of Building, Civil and Environmental Engineering, Concordia Univ., 1455 de Maisonneuve Blvd. West, Montreal, QC H3G 1M8, CA.) , Banu, Dorina (Nixaz Consulting, Toronto, ON, CA M5B 2H5.) , Schmidt, Rolf (Dept. of Chemistry and Biochemistry, Concordia Univ., Montreal, QC H3E 1H1, CA.) , DeWolf, Christine E. (Dept. of Chemistry and Biochemistry, Concordia Univ., Montreal, QC H3E 1H1, CA.) , Feldman, Dorel (Dept. of Building, Civil and Environmental Engineering, Concordia Univ., 1455 de Maisonneuve Blvd. West, Montreal, QC H3G 1M8, CA.)
초록이 없습니다.
Shah Do Fibers Increase the Tensile Strength of Cement Based Materials? ACI Mater. J. 88 1991 595
Cement & Concrete Institute, 2010, “Fibre Reinforced Concrete,” Cement & Concrete Institute, Midrand, South Africa, http://www.cnci.org.za/Uploads/Fibre%20Reinforced%2001102010.pdf (Last accessed 12 June 2012).
ACI Committee 544, “State-of-the-Art Report on Fiber Reinforced Concrete,” ACI 544.1R, American Concrete Institute, Farmington Hills, MI, 2001.
Owens The Mechanism of Corona and Ultraviolet Light Induced Self-Adhesion of Poly(ethyleneterephthalate) Film J. Appl. Sci. 19 1975 10.1002/app.1975.070191216 3315
Carley Corona Discharge Treatment of Polymeric Films II: Chemical Studies Polym. Eng. Sci. 20 5 1980 10.1002/pen.760200504 330
Ogawa Improvement of the Mechanical Properties of Ultrahigh Molecular Weight Polyethylene Fiber/Epoxy Composites by Corona-Discharge Treatment J. Appl. Polym. Sci. 79 7 2001 10.1002/1097-4628(20010214)79:7<1162::AID-APP20>3.0.CO;2-Y 1162
Hall Activated Gas Plasma Surface Treatment of Polymers for Adhesive Bonding J. Appl. Polym. Sci. 13 1969 10.1002/app.1969.070131006 2085
Plawky Surface Modification of Polyethylene Fiber Treated in Oxygen Microwave Plasma Acta Polym. 47 2/3 1996 10.1002/actp.1996.010470208 112
Della Volpe Air Plasma Treated Polyethylene Fibers: Effect of Time and Temperature Ageing on Fiber Surface Properties and Fiber-Matrix Adhesion J. Mater. Sci. 29 15 1994 10.1007/BF00355950 3919
Tissington A Study of the Effects of Oxygen Plasma Treatment on the Adhesion Behavior of Polyethylene Fibers Compos. Sci. Technol. 44 3 1992 10.1016/0266-3538(92)90011-Q 185
Li Effect of Plasma Treatment of Polyethylene Fibers on Interface and Cementitious Composite Properties J. Am. Ceram. Soc. 79 3 1996 10.1111/j.1151-2916.1996.tb07932.x 700
Zhang Plasma Treatment of Polymeric Fibers for Improved Performance in Cement Matrices J. Appl. Polym. Sci. 76 2000 10.1002/(SICI)1097-4628(20000628)76:14<1985::AID-APP1>3.0.CO;2-G 1985
Felekoglu A Comparative Study on the Flexural Performance of Plasma Treated Polypropylene Fiber Reinforced Cementitious Composites J. Mater. Process. Technol. 209 11 2009 10.1016/j.jmatprotec.2009.02.015 5133
Dasgupta Surface Modification of Polyolefins for Hydrophilicity and Bondability: Ozonization and Grafting Hydrophilic Monomers on Ozonized Polyolefins J. Appl. Polym. Sci. 41 1990 10.1002/app.1990.070410119 233
Silverstein Surface Modification of UHMWPE Fibers J. Appl. Polym. Sci. 52 1994 10.1002/app.1994.070521213 1785
Foerch Modification of Polymer Surfaces by Two-Step Plasma Sensitized Reactions J. Polym. Sci. [A1] 28 4 1990 10.1002/pola.1990.080280409 803
Yoshikawa Surface Modification High Performance Polyethylene Fiber by Photo-Oxygenation and Its Effect on Mechanical Properties of FRP J. Soc. Mater. Sci. Jpn. 41 462 1992 10.2472/jsms.41.369 369
McIntyre New UV/Ozone Treatment Improves Adhesiveness of Polymer Surfaces Mod. Plast. 1995 70 79
Gongjian Surface Modification of Polyolefine by UV Light/Ozone Treatment J. Appl. Polym. Sci. 60 13 1996 10.1002/(SICI)1097-4628(19960627)60:13<2397::AID-APP11>3.0.CO;2-2 2397
Fu Improving the Bond Between Carbon Fiber and Cement by Fiber Surface Treatment and Polymer Addition to Cement Mix Cem. Concr. Res. 26 7 1996 10.1016/0008-8846(96)00084-1 1007
Alhozaimy Mechanical Properties of Polypropylene Fiber-Reinforced Concrete and the Effects of Pozzolanic Materials Cem. Concr. Compos. 18 1996 10.1016/0958-9465(95)00003-8 85
Hughes Improving the Toughness of High Strength Cement Paste Concrete 7 1976 185
Beddar, M., Fibre-Reinforced Concrete: Past, Present and Future, Vol. 38, Concrete Society, Camberley, UK, 2004.
Concrete Society, Concrete Industrial Ground Floors: A Guide to Design and Construction, 3rd ed., Concrete Society, Camberley, UK, 2003, p. 69.
Altoubat, S., Roesler, J., and Reider, K.-A., “Flexural Capacity of Synthetic Fiber Reinforced Concrete Slabs Supported on Ground Based on Beam Toughness Results,” Proceedings of the 6th RILEM Symposium on Fiber Reinforced Concrete BEFIB-2004, Varenna, Italy, September 20-22, 2004, RILEM (Reunion Internationale des Laboratoires et Experts des Materiaux, systemes de construction et ouvrages), pp. 1063-1073.
Roesler Fracture of Plain and Fiber-Reinforced Concrete Slabs Under Monotonic Loading J. Mater. Civ. Eng. 16 5 2004 10.1061/(ASCE)0899-1561(2004)16:5(452) 452
ASTM C192/C192M, 2007, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory”, Annual Book of ASTM Standards, Vol. 04.02, ASTM International, West Conshohocken, PA.
ASTM C1609/C1609M, 2005, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading),” Annual Book of ASTM Standards, Vol. 04.02, ASTM International, West Conshohocken, PA.
Chen Specimen Geometry and Toughness of Steel-Fiber-Reinforced Concrete J. Mater. Civ. Eng. 6 4 1994 10.1061/(ASCE)0899-1561(1994)6:4(529) 529
Payrow Effect of Surface Treatment on the Post-peak Residual Strength and Toughness of Polypropylene/Polyethylene-blended Fiber-reinforced Concrete J. Compos. Mater. 45 20 2011 10.1177/0021998311399481 2047
Feldman Polypropylene Fiber-matrix Bonds in Cementitious Composites J. Adhes. Sci. Technol. 14 13 2000 10.1163/156856100742500 1705
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.