$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Effect of UV and UV-Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite

Advances in civil engineering materials, v.2 no.1, 2013년, pp.20120014 -   

Payrow, Pouria (Nixaz Consulting, Toronto, ON, CA M5B 2H5.) ,  Nokken, Michelle R. (Dept. of Building, Civil and Environmental Engineering, Concordia Univ., 1455 de Maisonneuve Blvd. West, Montreal, QC H3G 1M8, CA.) ,  Banu, Dorina (Nixaz Consulting, Toronto, ON, CA M5B 2H5.) ,  Schmidt, Rolf (Dept. of Chemistry and Biochemistry, Concordia Univ., Montreal, QC H3E 1H1, CA.) ,  DeWolf, Christine E. (Dept. of Chemistry and Biochemistry, Concordia Univ., Montreal, QC H3E 1H1, CA.) ,  Feldman, Dorel (Dept. of Building, Civil and Environmental Engineering, Concordia Univ., 1455 de Maisonneuve Blvd. West, Montreal, QC H3G 1M8, CA.)

초록이 없습니다.

참고문헌 (32)

  1. Shah Do Fibers Increase the Tensile Strength of Cement Based Materials? ACI Mater. J. 88 1991 595 

  2. Cement & Concrete Institute, 2010, “Fibre Reinforced Concrete,” Cement & Concrete Institute, Midrand, South Africa, http://www.cnci.org.za/Uploads/Fibre%20Reinforced%2001102010.pdf (Last accessed 12 June 2012). 

  3. ACI Committee 544, “State-of-the-Art Report on Fiber Reinforced Concrete,” ACI 544.1R, American Concrete Institute, Farmington Hills, MI, 2001. 

  4. Owens The Mechanism of Corona and Ultraviolet Light Induced Self-Adhesion of Poly(ethyleneterephthalate) Film J. Appl. Sci. 19 1975 10.1002/app.1975.070191216 3315 

  5. Carley Corona Discharge Treatment of Polymeric Films II: Chemical Studies Polym. Eng. Sci. 20 5 1980 10.1002/pen.760200504 330 

  6. Ogawa Improvement of the Mechanical Properties of Ultrahigh Molecular Weight Polyethylene Fiber/Epoxy Composites by Corona-Discharge Treatment J. Appl. Polym. Sci. 79 7 2001 10.1002/1097-4628(20010214)79:7<1162::AID-APP20>3.0.CO;2-Y 1162 

  7. Hall Activated Gas Plasma Surface Treatment of Polymers for Adhesive Bonding J. Appl. Polym. Sci. 13 1969 10.1002/app.1969.070131006 2085 

  8. Plawky Surface Modification of Polyethylene Fiber Treated in Oxygen Microwave Plasma Acta Polym. 47 2/3 1996 10.1002/actp.1996.010470208 112 

  9. Della Volpe Air Plasma Treated Polyethylene Fibers: Effect of Time and Temperature Ageing on Fiber Surface Properties and Fiber-Matrix Adhesion J. Mater. Sci. 29 15 1994 10.1007/BF00355950 3919 

  10. Tissington A Study of the Effects of Oxygen Plasma Treatment on the Adhesion Behavior of Polyethylene Fibers Compos. Sci. Technol. 44 3 1992 10.1016/0266-3538(92)90011-Q 185 

  11. Li Effect of Plasma Treatment of Polyethylene Fibers on Interface and Cementitious Composite Properties J. Am. Ceram. Soc. 79 3 1996 10.1111/j.1151-2916.1996.tb07932.x 700 

  12. Zhang Plasma Treatment of Polymeric Fibers for Improved Performance in Cement Matrices J. Appl. Polym. Sci. 76 2000 10.1002/(SICI)1097-4628(20000628)76:14<1985::AID-APP1>3.0.CO;2-G 1985 

  13. Felekoglu A Comparative Study on the Flexural Performance of Plasma Treated Polypropylene Fiber Reinforced Cementitious Composites J. Mater. Process. Technol. 209 11 2009 10.1016/j.jmatprotec.2009.02.015 5133 

  14. Dasgupta Surface Modification of Polyolefins for Hydrophilicity and Bondability: Ozonization and Grafting Hydrophilic Monomers on Ozonized Polyolefins J. Appl. Polym. Sci. 41 1990 10.1002/app.1990.070410119 233 

  15. Silverstein Surface Modification of UHMWPE Fibers J. Appl. Polym. Sci. 52 1994 10.1002/app.1994.070521213 1785 

  16. Foerch Modification of Polymer Surfaces by Two-Step Plasma Sensitized Reactions J. Polym. Sci. [A1] 28 4 1990 10.1002/pola.1990.080280409 803 

  17. Yoshikawa Surface Modification High Performance Polyethylene Fiber by Photo-Oxygenation and Its Effect on Mechanical Properties of FRP J. Soc. Mater. Sci. Jpn. 41 462 1992 10.2472/jsms.41.369 369 

  18. McIntyre New UV/Ozone Treatment Improves Adhesiveness of Polymer Surfaces Mod. Plast. 1995 70 79 

  19. Gongjian Surface Modification of Polyolefine by UV Light/Ozone Treatment J. Appl. Polym. Sci. 60 13 1996 10.1002/(SICI)1097-4628(19960627)60:13<2397::AID-APP11>3.0.CO;2-2 2397 

  20. Fu Improving the Bond Between Carbon Fiber and Cement by Fiber Surface Treatment and Polymer Addition to Cement Mix Cem. Concr. Res. 26 7 1996 10.1016/0008-8846(96)00084-1 1007 

  21. Alhozaimy Mechanical Properties of Polypropylene Fiber-Reinforced Concrete and the Effects of Pozzolanic Materials Cem. Concr. Compos. 18 1996 10.1016/0958-9465(95)00003-8 85 

  22. Hughes Improving the Toughness of High Strength Cement Paste Concrete 7 1976 185 

  23. Hannant Fiber Reinforcement in the Cement and Concrete Industry Mater. Sci. Technol. 11 1995 10.1179/026708395790165499 853 

  24. Beddar, M., Fibre-Reinforced Concrete: Past, Present and Future, Vol. 38, Concrete Society, Camberley, UK, 2004. 

  25. Concrete Society, Concrete Industrial Ground Floors: A Guide to Design and Construction, 3rd ed., Concrete Society, Camberley, UK, 2003, p. 69. 

  26. Altoubat, S., Roesler, J., and Reider, K.-A., “Flexural Capacity of Synthetic Fiber Reinforced Concrete Slabs Supported on Ground Based on Beam Toughness Results,” Proceedings of the 6th RILEM Symposium on Fiber Reinforced Concrete BEFIB-2004, Varenna, Italy, September 20-22, 2004, RILEM (Reunion Internationale des Laboratoires et Experts des Materiaux, systemes de construction et ouvrages), pp. 1063-1073. 

  27. Roesler Fracture of Plain and Fiber-Reinforced Concrete Slabs Under Monotonic Loading J. Mater. Civ. Eng. 16 5 2004 10.1061/(ASCE)0899-1561(2004)16:5(452) 452 

  28. ASTM C192/C192M, 2007, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory”, Annual Book of ASTM Standards, Vol. 04.02, ASTM International, West Conshohocken, PA. 

  29. ASTM C1609/C1609M, 2005, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading),” Annual Book of ASTM Standards, Vol. 04.02, ASTM International, West Conshohocken, PA. 

  30. Chen Specimen Geometry and Toughness of Steel-Fiber-Reinforced Concrete J. Mater. Civ. Eng. 6 4 1994 10.1061/(ASCE)0899-1561(1994)6:4(529) 529 

  31. Payrow Effect of Surface Treatment on the Post-peak Residual Strength and Toughness of Polypropylene/Polyethylene-blended Fiber-reinforced Concrete J. Compos. Mater. 45 20 2011 10.1177/0021998311399481 2047 

  32. Feldman Polypropylene Fiber-matrix Bonds in Cementitious Composites J. Adhes. Sci. Technol. 14 13 2000 10.1163/156856100742500 1705 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로