다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Metrology and measurement systems, v.22 no.4, 2015년, pp.565 - 576
Majchrowski, Radomir , Grzelka, Mirosław , Wieczorowski, Michał , Sadowski, Łukasz , Gapiński, Bartosz
AI-Helper
AbstractThe paper presents examinations of the surface of base concrete with a 3D scanner. Two base concrete surfaces, differently prepared, were examined, together with two measurement strategies: simple and fast 3D scanning and partial scanning in selected areas corresponding to the device measure...
Fundamental scales of adhesion and area - scale fractal analysis of Machine Tools and Manufacture Brown 1927 International Journal 41 2001
New nondestructive way of identifying the values of pull - off adhesion between concrete layers in floors of Civil Engineering and Sadowski 561 Journal Management 20 2014
Variability of areal surface topography parameters due to the change in surface orientation to measurement direction Dzierwa 170 Scanning 36 2014 10.1002/sca.21115
Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC of Adhesion Science and Tayeh 1846 Journal Technology 28 2014
Analysis of failure conditions for a dynamically loaded composite floor system of an industrial building of Civil Engineering and Berkowski 529 Journal Management 19 2013
Recent trends in surface metrology Mathia 494 Wear 271 2011 10.1016/j.wear.2010.06.001
Characterization of concrete surface roughness and its relation to adhesion in repair systems Materials Garbacz 281 Characterization 56 2006 10.1016/j.matchar.2005.10.014
Measurement Techniques Used for Analysis of the Geometric Structure of Machined Surfaces Management and Production Engineering Niemczewska 27 Review 5 2014
Non - destructive evaluation of the pull - off adhesion of concrete floor layers using RBF neural Network of Civil Engineering and Sadowski 550 Journal Management 19 2013
Surfaces and Their Measurement Hermes Whitehouse Science 2002
How to select the most relevant roughness parameters of a surface Deltombe 150 Scanning 36 2014 10.1002/sca.21113
Surface morphology and wettability of sandblasted PEEK and its composites Ourahmoune 64 Scanning 36 2014 10.1002/sca.21089
Comparison of surface macrotexture measurement methods of Civil Engineering and Fisco 153 Journal Management 19 2013
Concrete floor - bovine claw contact pressures related to floor roughness and deformation of the claw of Dairy Franck 2952 Journal Science 89 2008
Surface roughness and texture analysis in microscale Myshkin 1001 Wear 254 2003 10.1016/S0043-1648(03)00306-5
The non - destructive impulse response test in North America Davis 1985 International 36 2003
Evaluation and comparison of surface macrotexture and friction measurement methods of Civil Engineering and Sezen 387 Journal Management 19 2013
Application of optical scanning for measurements of castings and cores of Foundry Engineering Wieczorowski 265 Archives 10 2010
A surface engineering approach applicable to concrete repair engineering Bulletin of The Polish Academy of Sciences : Technical Garbacz 73 Sciences 61 2013
Optical Metrology of Surfaces Manufacturing Hocken 169 10.1016/S0007-8506(07)60025-0 CIRP Annals Technology 54
Influence of argon pollution on the weld Surface Morphology Królczyk 203 Measurement 70 2014 10.1016/j.measurement.2015.04.001
Optical coordinate scanners applied for the inspection of large scale housings produced in foundry technology of Foundry Engineering Grzelka 255 Archives 10 2010
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.