[논문]BIM-based automated design and planning for boarding of light-frame residential buildings

Liu, Hexu; Singh, Gurjeet; Lu, Ming; Bouferguene, Ahmed; Al-Hussein, Mohamed

doi:10.1016/j.autcon.2018.02.001

BIM-based automated design and planning for boarding of light-frame residential buildings

Automation in construction, v.89, 2018년, pp.235 - 249

Liu, Hexu (Department of Civil and Environmental Engineering, University of Alberta) , Singh, Gurjeet (Department of Civil and Environmental Engineering, University of Alberta) , Lu, Ming (Department of Civil and Environmental Engineering, University of Alberta) , Bouferguene, Ahmed (Department of Mathematics, University of Alberta) , Al-Hussein, Mohamed (Department of Civil and Environmental Engineering, University of Alberta)

Abstract ▼ AI-Helper

Abstract Building information modelling technology provides a game-changing solution to address the challenges encountered in the AEC industry. However, this technology currently is not sufficient to fulfil the needs of construction practitioners in terms of proactive design and planning for boarding of light-frame residential buildings. This is partially due to the fact that boarding design and planning requires trades' know-how and substantial manual effort in developing the building information models. Current manual and ad hoc decision making for boarding of light-frame buildings leads to the generation of a significant amount of material waste. This research thus proposes a rule-based automated building information model (BIM) approach for designing boarding layout and planning material sheet cutting, resulting in practically feasible solutions with minimal material waste. In this research, object-based computer-processable layout design rules are comprehensively formalised based on trades' know-how. On this basis, rule-based design algorithms are further developed and integrated with mathematical algorithms in order to automatically generate design and planning alternatives while minimising material waste. Rich information in the BIM is leveraged to automate the rule-based boarding design and planning. A prototype system is developed based on Autodesk Revit via Application Programming Interface. A typical wood-framed residential building is used as a case study to test the developed prototype system. The results show the proposed approach successfully preserves the know-how of senior trades people while also minimising material waste in automating the boarding design and planning. Highlights Improper boarding design and planning leads to a significant amount of material waste. A rule-based automated BIM approach to boarding design and planning is proposed. Rule-based design algorithms are developed to automate the boarding design. Design rules are comprehensively formalised based on trades' know-how. A prototype system is developed as an Autodesk Revit add-on tool for demonstration.

주제어

참고문헌 (41)

Autodesk Ltd
Autodesk Ltd
Association of School Business Officials
Comp. Civ. Eng. Alwisy 2012 221 2012 10.1061/9780784412343.0028 BIM approach for automated drafting and design for modular construction manufacturing
California Integrated Waste Management Board
Autom. Constr. Cavieres 20 716 2011 10.1016/j.autcon.2011.01.003 Knowledge-based parametric tools for concrete masonry walls: conceptual design and preliminary structural analysis

상세보기
Waste Manag. Cheng 33 6 1539 2013 10.1016/j.wasman.2013.01.001 A BIM-based system for demolition and renovation waste estimation and planning

상세보기
Autom. Constr. Ding 46 82 2014 10.1016/j.autcon.2014.04.009 Building information modeling (BIM) application framework: the process of expanding from 3D to computable nD

상세보기
Eastman 2011 BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors
Esparza
Autom. Constr. Gu 19 8 988 2010 10.1016/j.autcon.2010.09.002 Understanding and facilitating BIM adoption in the AEC industry

상세보기
Eng. Mech. Hu 27 12 192 2010 4D construction safety information model-based safety analysis approach for scaffold system during construction
Autom. Constr. Jensen 23 1 2012 10.1016/j.autcon.2011.11.016 Configuration through the parameterization of building components

상세보기
Autom. Constr. Kim 70 128 2016 10.1016/j.autcon.2016.06.012 Integrating work sequences and temporary structures into safety planning: automated scaffolding-related safety hazard identification and prevention in BIM

상세보기
Adv. Eng. Inform. Kim 28 1 66 2014 10.1016/j.aei.2013.12.002 Automatic design and planning of scaffolding systems using building information modeling

상세보기
Autom. Constr. Kumar 59 24 2015 10.1016/j.autcon.2015.07.008 A BIM-based automated site layout planning framework for congested construction sites

상세보기
Autom. Constr. Lee 15 758 2006 10.1016/j.autcon.2005.09.009 Specifying parametric building object behavior (BOB) for a building information modeling system

상세보기
Autom. Constr. Lee 41 96 2014 10.1016/j.autcon.2013.10.020 BIM and ontology-based approach for building cost estimation

상세보기
Autom. Constr. Leite 20 5 601 2011 10.1016/j.autcon.2010.11.027 Analysis of modeling effort and impact of different levels of detail in building information models

상세보기
Autom. Constr. Liu 53 29 2015 10.1016/j.autcon.2015.03.008 BIM-based integrated approach for detailed construction scheduling under resource constraints

상세보기
Liu 8 2015 Proceedings, International Construction Specialty Conference Automated production planning in panelized construction enabled by integrating discrete-event simulation and BIM
Liu 1666 2014 Proceedings of the Construction Research Congress An automatic scheduling approach: building information modeling-based on-site scheduling for panelized construction
Liu 286 2014 Proceedings, International Symposium on Automation and Robotics in Construction, Sydney, Australia, Jul. 9-11 BIM-based integrated framework for detailed cost estimation and schedule planning of construction projects
Adv. Eng. Inform. Liu 30 2 190 2016 10.1016/j.aei.2016.03.001 Ontology-based semantic approach for construction-oriented quantity take-off from BIM models in the light-frame building industry

상세보기
Autom. Constr. Liu 59 1 2015 10.1016/j.autcon.2015.07.020 A BIM-aided construction waste minimisation framework

상세보기
Comput. Aided Civ. Inf. Eng. Ma 31 1 4 2016 10.1111/mice.12175 Formalized representation of specifications for construction cost estimation by using ontology

상세보기
Montibelli
Autom. Constr. Manrique 55 15 2015 10.1016/j.autcon.2015.03.004 Automated generation of shop drawings in residential construction

상세보기
J. Constr. Eng. Manag. Manrique 137 3 188 2009 10.1061/(ASCE)CO.1943-7862.0000117 Combinatorial algorithm for optimizing wood waste in framing designs

상세보기
National Association of Home Builders
J. Constr. Eng. Manag. Porwal 138 8 943 2011 10.1061/(ASCE)CO.1943-7862.0000508 Building information modeling-based analysis to minimize waste rate of structural reinforcement

상세보기
J. Comput. Civ. Eng. Qi 28 5 2013 10.1061/(ASCE)CP.1943-5487.0000365 Use of building information modeling in design to prevent construction worker falls

상세보기
J. Constr. Eng. Manag. Ramaji 142 10 2016 10.1061/(ASCE)CO.1943-7862.0001159 Product architecture model for multistory modular buildings

상세보기
Autom. Constr. Sacks 17 4 439 2008 10.1016/j.autcon.2007.08.003 Impact of three-dimensional parametric modeling of buildings on productivity in structural engineering practice

상세보기
Autom. Constr. Sacks 13 291 2004 10.1016/S0926-5805(03)00043-8 Parametric 3D modeling in building construction with examples from precast concrete

상세보기
Prestressed Concrete Institute Journal Sacks 50 4 126 2005 A target benchmark of the impact of three-dimensional parametric modeling in precast construction

상세보기
StrucSoft Solutions Ltd
Webster
Waste Manag. Won 49 170 2016 10.1016/j.wasman.2015.12.026 Quantification of construction waste prevented by BIM-based design validation: case studies in South Korea

상세보기
Adv. Eng. Softw. Yang 37 8 502 2006 10.1016/j.advengsoft.2006.01.005 An improved tabu search approach with mixed objective function for one-dimensional cutting stock problems

상세보기
Zaki 844 2017 Proceedings of the Architectural Engineering Conference Parametric blockwall-assembly algorithms for the automated generation of virtual wall mockups using BIM

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

BIM-based automated design and planning for boarding of light-frame residential buildings

Abstract ▼ AI-Helper

주제어

참고문헌 (41)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트