참고문헌 (26)

1. IIE Transactions Aboutaleb A. 49 1 2016 

2. Facchini, Luca, Vicente Jr., Nério, Lonardelli, Ivan, Magalini, Emanuele, Robotti, Pierfrancesco, Molinari, Alberto. Metastable Austenite in 17–4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting. Advanced engineering materials, vol.12, no.3, 184-188.

   상세보기

3. 10.1007/978-1-4419-1120-9 

   

4. Proceedings of Solid Freeform Fabrication Symposium Gu H. 474 2013 

5. Handbook A (1991), Volume 4: Heat Treating, ASM International, Ohio, pp. 72-74. 

6. Hsiao, C.N., Chiou, C.S., Yang, J.R.. Aging reactions in a 17-4 PH stainless steel. Materials chemistry and physics, vol.74, no.2, 134-142.

   상세보기

7. Hunt, J., Derguti, F., Todd, I.. Selection of steels suitable for additive layer manufacturing. Ironmaking & steelmaking, vol.41, no.4, 254-256.

   상세보기

8. Jerrard, P G E, Hao, L, Evans, K E. Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, vol.223, no.11, 1409-1416.

   상세보기

9. Kruth, J.P., Levy, G., Klocke, F., Childs, T.H.C.. Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP annals ... manufacturing technology, vol.56, no.2, 730-759.

   상세보기

10. Lin, X., Cao, Y., Wu, X., Yang, H., Chen, J., Huang, W.. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.553, 80-88.

    상세보기

11. Luecke, William E, Slotwinski, John A. Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing. Journal of research of the National Institute of Standards and Technology, vol.119, 398-418.

    상세보기

12. Murr, Lawrence E., Martinez, Edwin, Hernandez, Jennifer, Collins, Shane, Amato, Krista N., Gaytan, Sara M., Shindo, Patrick W.. Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting. Journal of materials research and technology, vol.1, no.3, 167-177.

    상세보기

13. 10.2172/6607517 

    

14. Rafi, H. Khalid, Pal, Deepankar, Patil, Nachiket, Starr, Thomas L., Stucker, Brent E.. Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting. Journal of materials engineering and performance, vol.23, no.12, 4421-4428.

    상세보기

15. Powder Metallurgy Selcuk C. 94 54 2 2011 10.1179/174329011X12977874589924 

    상세보기

16. Shamsaei, Nima, Yadollahi, Aref, Bian, Linkan, Thompson, Scott M.. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control. Additive manufacturing, vol.8, 12-35.

    상세보기

17. Laser Assisted Netshape Engineering 4, Proceedings of the 4th LANE Shellabear M. 21 2004 

18. Structure and Properties of Engineering Alloys Smith W.F. 1981 

19. Proceedings of Solid Freeform Fabrication Symposium Starr T.L. 439 2012 

20. Viswanathan, U.K., Banerjee, S., Krishnan, R.. Effects of aging on the microstructure of 17-4 PH stainless steel. Materials science and engineering, vol.104, 181-189.

    상세보기

21. Wang, Fude. Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology. International journal of advanced manufacturing technology, vol.58, no.5, 545-551.

    상세보기

22. Yadollahi, A., Shamsaei, N., Thompson, S.M., Seely, D.W.. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.644, 171-183.

    상세보기

23. 10.1115/IMECE2015-52362 

    

24. Standard Terminology for Additive Manufacturing Technologies Standard, A. F2792-12a 2012 

25. 10.1520.E0008-E0008M-09 

    

26. 10.1520/E0009-09