AbstractIn modern aircraft engines,a high number of complex high-performance components are employed, which are partly subjected to extreme loading. For instance, the high-pressure turbine blades of the first stage after the combustor are both thermally-mechanically loaded and experience severe corr...
AbstractIn modern aircraft engines,a high number of complex high-performance components are employed, which are partly subjected to extreme loading. For instance, the high-pressure turbine blades of the first stage after the combustor are both thermally-mechanically loaded and experience severe corrosive attack. Therefore they are furnished with several protective systems in order to improve the fatigue life and reliability of the high-temperature material blades employed. A ceramic thermal barrier coating insulates the internally and film-cooled blades against the hot gas stream whilst the underlying layer (PtAl, Al, MCrAlY) protects the substrate material against corrosive attack and oxidation. Owing to the low electrical conductivity of the materials employed in the multilayered system of the high-pressure turbine blades with layer thicknesses of 20-150 μm, conventional eddy-current and thermographic technologies are only suitable to a limited extent to non-destructively detect the condition of the individual layers separately from the substrate material. In contrast to this, with the aid of multi-parameter, high-frequency eddy-current technologies and high-frequency induction thermography using pulsed excitation, the eddy-currents with test frequencies in the mega-Hertz range (up to 100 MHz) can be limited to the near subsurface and produce standard penetration depths of <50 μm; which enables the layer and substrate materials to be differentially studied. The objective of the present study was to non-destructively detect the condition of the coatings, to characterise and determine the thickness of the coating as well as to detect the condition of the substrate material and sensitively analyse local damage and defects.
AbstractIn modern aircraft engines,a high number of complex high-performance components are employed, which are partly subjected to extreme loading. For instance, the high-pressure turbine blades of the first stage after the combustor are both thermally-mechanically loaded and experience severe corrosive attack. Therefore they are furnished with several protective systems in order to improve the fatigue life and reliability of the high-temperature material blades employed. A ceramic thermal barrier coating insulates the internally and film-cooled blades against the hot gas stream whilst the underlying layer (PtAl, Al, MCrAlY) protects the substrate material against corrosive attack and oxidation. Owing to the low electrical conductivity of the materials employed in the multilayered system of the high-pressure turbine blades with layer thicknesses of 20-150 μm, conventional eddy-current and thermographic technologies are only suitable to a limited extent to non-destructively detect the condition of the individual layers separately from the substrate material. In contrast to this, with the aid of multi-parameter, high-frequency eddy-current technologies and high-frequency induction thermography using pulsed excitation, the eddy-currents with test frequencies in the mega-Hertz range (up to 100 MHz) can be limited to the near subsurface and produce standard penetration depths of <50 μm; which enables the layer and substrate materials to be differentially studied. The objective of the present study was to non-destructively detect the condition of the coatings, to characterise and determine the thickness of the coating as well as to detect the condition of the substrate material and sensitively analyse local damage and defects.
Abstract
KurzfassungIn modernen Flugtriebwerkenkommen eine Vielzahl komplexer Hochleistungsbauteile zum Einsatz, die teils extremen Belastungen ausgesetzt sind. Die Hochdruckturbinenschaufeln der ersten Stufe nach der Brennkammer sind sowohl thermisch und mechanisch als auch korrosiv hoch belastet und daher mit mehreren Schutzsystemen ausgestattet, um die Lebensdauer und Zuverlässigkeit der eingesetzten Beschaufelung aus Hochtemperaturwerkstoffen zu verbessern. Eine keramische Wärmedämmschicht isoliert die innen- und filmgekühlten Schaufeln zusätzlich gegenüber der Heißgasströmung, während die darunterliegende Heißgaskorrosionsschutzschicht (PtAl, Al, MCrAlY) den Grundwerkstoff vor korrosiven Angriffen und Oxidation schützt. Um den Zustand der einzelnen Beschichtungen im Mehrschichtsystem der Hochdruckturbinenschaufel mit Schichtdicken von 20-150 μm zerstörungsfrei und getrennt vom Grundwerkstoff zu erfassen, sind aufgrund der geringen elektrischen Leitfähigkeit der verwendeten Werkstoffe konventionelle Wirbelstrom- und Thermografietechniken nur bedingt geeignet. Mithilfe der Mehrparameter-Hochfrequenz-Wirbelstromtechnik und der Hochfrequenz-Induktionsthermografie mit gepulster Anregung lassen sich hingegen die Wirbelströme bei Prüffrequenzen im Megahertzbereich bis 100 MHz auf die oberflächennahe Randzone begrenzen und Standardeindringtiefen von <50 μm realisieren, was eine differenzierte Betrachtung von Schicht- und Grundwerkstoff ermöglicht. Ziel der Untersuchungen ist die zerstörungsfreie Zustandserfassung der Beschichtungen, die Schichtcharakterisierung und die Schichtdickenbestimmung sowie die Zustandserfassung des Grundwerkstoffs und der empfindliche Nachweis lokaler Schädigungen und Defekte.
KurzfassungIn modernen Flugtriebwerkenkommen eine Vielzahl komplexer Hochleistungsbauteile zum Einsatz, die teils extremen Belastungen ausgesetzt sind. Die Hochdruckturbinenschaufeln der ersten Stufe nach der Brennkammer sind sowohl thermisch und mechanisch als auch korrosiv hoch belastet und daher mit mehreren Schutzsystemen ausgestattet, um die Lebensdauer und Zuverlässigkeit der eingesetzten Beschaufelung aus Hochtemperaturwerkstoffen zu verbessern. Eine keramische Wärmedämmschicht isoliert die innen- und filmgekühlten Schaufeln zusätzlich gegenüber der Heißgasströmung, während die darunterliegende Heißgaskorrosionsschutzschicht (PtAl, Al, MCrAlY) den Grundwerkstoff vor korrosiven Angriffen und Oxidation schützt. Um den Zustand der einzelnen Beschichtungen im Mehrschichtsystem der Hochdruckturbinenschaufel mit Schichtdicken von 20-150 μm zerstörungsfrei und getrennt vom Grundwerkstoff zu erfassen, sind aufgrund der geringen elektrischen Leitfähigkeit der verwendeten Werkstoffe konventionelle Wirbelstrom- und Thermografietechniken nur bedingt geeignet. Mithilfe der Mehrparameter-Hochfrequenz-Wirbelstromtechnik und der Hochfrequenz-Induktionsthermografie mit gepulster Anregung lassen sich hingegen die Wirbelströme bei Prüffrequenzen im Megahertzbereich bis 100 MHz auf die oberflächennahe Randzone begrenzen und Standardeindringtiefen von <50 μm realisieren, was eine differenzierte Betrachtung von Schicht- und Grundwerkstoff ermöglicht. Ziel der Untersuchungen ist die zerstörungsfreie Zustandserfassung der Beschichtungen, die Schichtcharakterisierung und die Schichtdickenbestimmung sowie die Zustandserfassung des Grundwerkstoffs und der empfindliche Nachweis lokaler Schädigungen und Defekte.
2003 Lecture held on: Turbine Forum, Effective Repair of Gas Turbine Components, 9-11.04.03 Balance Strip: An Effective Method for Stripping Aluminide Coatings
Schweissen und Schneiden 60 6 331 2008 Entwicklung einer Online-Schichtdickenmessung fur das Plasmaspritzen von Keramik auf Basis einer Wirbelstromsensorik
2006 Modern Surface Technology Nondestructive testing and assessment of coatings
HTM J. Heat Treatm. Mat. 63 5 284 2008 10.3139/105.100469 Nachweis von Anrissen in der Randzone von Hochleistungsbauteilen mit Wirbelstromtechnik und induktiv angeregter Thermographie
※ AI-Helper는 부적절한 답변을 할 수 있습니다.