최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Construction & building materials, v.178, 2018년, pp.233 - 243
Kim, Min-Jae (Department of Architectural Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea) , Kim, Soonho (Department of Architectural Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea) , Yoo, Doo-Yeol (Department of Architectural Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea) , Shin, Hyun-Oh (Department of Agricultural and Rural Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea)
This study aims to find the optimal type and concentration of fibers necessary to reinforce and enhance the mechanical properties of asphalt concrete. Four types of fibers: polypropylene (PP) and polyester (Pe) fibers with a length of 6 mm, nylon (Ny) and carbon (C) fibers, all with a length of 12 m...
Polym. News Akmal 24 136 1999 Application of asphalt-containing materials
Appl. Mech. Rev. Murali 56 2 149 2003 10.1115/1.1529658 Review of the uses and modeling of bitumen from ancient to modern times
Constr. Build. Mater. Xu 24 10 2003 2010 10.1016/j.conbuildmat.2010.03.012 Performance of fiber reinforced asphalt concrete under environmental temperature and water effects
T.W. Kennedy F.L. Roberts K.W. Lee, Evaluation of moisture effects on asphalt concrete mixtures No. 911 1983.
Constr. Build. Mater. Airey 22 9 2015 2008 10.1016/j.conbuildmat.2007.07.009 The influence of aggregate, filler and bitumen on asphalt mixture moisture damage
Constr. Build. Mater. Wu 22 10 2111 2008 10.1016/j.conbuildmat.2007.07.018 Investigation of rheological and fatigue properties of asphalt mixtures containing polyester fibers
Constr. Build. Mater. Gorkem 23 6 2227 2009 10.1016/j.conbuildmat.2008.12.001 Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime
Fitzgerald 2000 Novel Applications of Carbon Fiber for Hot Mix Asphalt Reinforcement and Carbon-Carbon Pre-Forms
J. Mater. Civ. Eng. Hassan 17 4 415 2005 10.1061/(ASCE)0899-1561(2005)17:4(416) Evaluation of open-graded fiction come mixtures containing cellulose fibers and styrene butadiene rubber polymer
Constr. Build. Mater. Peltonen 5 18 22 1991 Wear and deformation of characteristics of fiber reinforced asphalt pavements
A. Goel, A. Das, Emerging road materials and innovative, in: National conference on materials and their application in civil engineering, Hamipur, India, August 2004.
Build. Environ. Tapkın 43 1065 2008 10.1016/j.buildenv.2007.02.011 The effect of polypropylene fibers on asphalt performance
J. Environ. Eng. Bueno 129 10 952 2003 10.1061/(ASCE)0733-9372(2003)129:10(952) Engineering properties of fiber reinforced cold asphalt mixes
J. Assoc. Asphalt Paving Technol. Freeman 58 387 1989 Polyester fibers in asphalt paving mixtures
Constr. Build. Mater. Kim 13 5 243 1999 10.1016/S0950-0618(99)00032-X Mode I reflective cracking resistance of strengthened asphalt concrete
Constr. Build. Mater. Anurag 23 5 2035 2009 10.1016/j.conbuildmat.2008.08.018 Laboratory investigation of indirect tensile strength using roofing polyester waste fibers in hot mix asphalt
Tex. Res. J. Lee 75 2 123 2005 10.1177/004051750507500206 Fatigue cracking resistance of fiber-reinforced asphalt concrete
Mater. Des. Chen 30 7 2595 2009 10.1016/j.matdes.2008.09.030 Evaluation and design of fiber-reinforced asphalt mixtures
Constr. Build. Mater. Yang 128 176 2016 10.1016/j.conbuildmat.2016.10.082 Effects of amorphous metallic fibers on the properties of asphalt concrete
Guideline for the Design and Construction of Asphalt Mixtures, Ministry of Land, Infrastructure and Transport, Sejong, Korea, 2014.
KS F 2357, Aggregates for Asphalt Mixtures, Korean Agency for Technology and Standard, Seoul, Korea, 2009.
Constr. Build. Mater. Park 81 47 2015 10.1016/j.conbuildmat.2015.02.005 Cracking resistance of fiber reinforced asphalt concrete at ?20 °C
A.L. Simpson, C.M. Kamyar. Case study of modified bituminous mixtures: Somerset, Kentucky, in: Proc., 3rd Materials Engineering Conf. ASCE, New York, 804, 1994, pp. 88-96.
ASTM D1559 1989 Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
KS F 2364 2009 Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
KS F 2446 2000 Standard Test Method of Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures using Saturated Surface Dry Specimens
KS F 2366 2010 Standard Test Method for Theoretical Maximum Specific Gravity of Asphalt Mixtures
ASTM D6931 2012 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D 4867 2009 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
KS F2374 2010 Standard Test Method for Wheel Tracking of Asphalt Mixtures
KS F2395 2014 Standard Test Method for Bend Testing of Asphalt Mixtures,
Expert Syst. Appl. Tapkin 36 11186 2009 10.1016/j.eswa.2009.02.089 Accumulated strain prediction of polypropylene modified marshall specimens in repeated creep test using artificial neural networks
S.M. Hejazi, S.M. Abtahi, M. Sheikhzadeh, D. Semnani, Using an artificial neural network (ANN) for the investigation of some fiber parameter performances in fiber reinforced asphalt concrete (FRAC). in: 7th international conference sustainable aggregates, asphalt technology and pavement engineering, Liverpool, UK, 2008.
J. Mater. Sci. Chen 40 87 2005 10.1007/s10853-005-5691-4 Mechanism and behavior of bitumen strength reinforcement using fibers
Fuel Chen 89 1616 2010 10.1016/j.fuel.2009.08.020 Experimental study offibers in stabilizing and reinforcing asphalt binder
Arab J. Sci. Eng. Jahromi 33 355 2008 Carbon fiber reinforced asphalt concrete
Y. S. Jenq, L. Chwen-Jang, L. Pei, Analysis of crack resistance of asphalt concrete overlays: a fracture mechanics approach. Transportation Research Record. 1388, Transportation Research Board, Washington, D.C., 1993, pp. 160-166.
Constr. Build. Mater. Liu 24 7 1207 2010 10.1016/j.conbuildmat.2009.12.019 Induction heating of electrically conductive porous asphalt concrete
J. Test Eval. Xu 36 2 1 2008 Measurement and evaluation of asphalt concrete thermal expansion and contraction
Roberts 1991 Hot Mix Asphalt Materials, Mixture Design, and Construction
J. East Asia Soc. Trans. Studies Mahrez 5 794s 2003 Prospect of using glass fiber reinforced bituminous mixes
J. Transp. Eng. Tapkın 135 4 240 2009 10.1061/(ASCE)0733-947X(2009)135:4(240) Repeated creep behavior of polypropylene fiber-reinforced bituminous mixtures
Constr. Build. Mater. Valdes 73 399 2014 10.1016/j.conbuildmat.2014.09.098 Effect of the physical properties of aggregates on aggregate-asphalt bond measured using the UCL method
Constr. Build. Mater. Abtahi 24 6 871 2010 10.1016/j.conbuildmat.2009.11.009 Fiber-reinforced asphalt-concrete-a review
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.