[논문]Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software

Cha, Yong Ho; Lee, Keun Ho; Ryu, Hong Jong; Joo, Il Won; Seo, Anna; Kim, Dong-Hyeon; Kim, Sang Jun

doi:10.1155/2017/9610468

Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software 원문보기

Applied bionics and biomechanics, v.2017, 2017년, pp.9610468 -

Cha, Yong Ho (Department of Physical Therapy, Samsung Medical Center, Seoul, Republic of Korea) , Lee, Keun Ho (Department of Occupational Therapy, Samsung Medical Center, Seoul, Republic of Korea) , Ryu, Hong Jong (Research Planning Team, SolidEng Corporation, Incheon, Republic of Korea) , Joo, Il Won (Research Planning Team, SolidEng Corporation, Incheon, Republic of Korea) , Seo, Anna (3D Convergence Technology Center, Kyungpook National University, Daegu, Republic of Korea) , Kim, Dong-Hyeon (3D Convergence Technology Center, Kyungpook National University, Daegu, Republic of Korea) , Kim, Sang Jun (Department of Physical and Rehabilitation Medicine, Sungkyunkwan University School of Medicine and Samsung Medical Center, Seoul, Republic of Korea)

Abstract ▼ AI-Helper

We described 3D printing technique and automated design software and clinical results after the application of this AFO to a patient with a foot drop. After acquiring a 3D modelling file of a patient's lower leg with peroneal neuropathy by a 3D scanner, we loaded this file on the automated orthosis software and created the “STL” file. The designed AFO was printed using a fused filament fabrication type 3D printer, and a mechanical stress test was performed. The patient alternated between the 3D-printed and conventional AFOs for 2 months. There was no crack or damage, and the shape and stiffness of the AFO did not change after the durability test. The gait speed increased after wearing the conventional AFO (56.5 cm/sec) and 3D-printed AFO (56.5 cm/sec) compared to that without an AFO (42.2 cm/sec). The patient was more satisfied with the 3D-printed AFO than the conventional AFO in terms of the weight and ease of use. The 3D-printed AFO exhibited similar functionality as the conventional AFO and considerably satisfied the patient in terms of the weight and ease of use. We suggest the possibility of the individualized AFO with 3D printing techniques and automated design software.

참고문헌 (14)

1 Suaste-Gomez E. Rodriguez-Roldan G. Reyes-Cruz H. Teran-Jimenez O. Developing an ear prosthesis fabricated in polyvinylidene fluoride by a 3D printer with sensory intrinsic properties of pressure and temperature Sensors 2016 16 3 10.3390/s16030332 2-s2.0-84960098282 26959026

상세보기
2 Li J. Chen M. Fan X. Zhou H. Recent advances in bioprinting techniques: approaches, applications and future prospects Journal of Translational Medicine 2016 14 p. 271 10.1186/s12967-016-1028-0 2-s2.0-84988637921 27645770

상세보기
3 Park E. K. Lim J. Y. Yun I. S. Cranioplasty enhanced by three-dimensional printing: custom-made three-dimensional-printed titanium implants for skull defects The Journal of Craniofacial Surgery 2016 27 4 943 949 10.1097/SCS.0000000000002656 2-s2.0-84969174964 27192643

상세보기
4 Arabnejad S. Johnston B. Tanzer M. Pasini D. Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty Journal of Orthopaedic Research 2016 24 10.1002/jor.23445 2-s2.0-84990246770 27664796

상세보기
5 Wyatt M. C. Custom 3D-printed acetabular implants in hip surgery—innovative breakthrough or expensive bespoke upgrade? Hip International 2015 25 4 375 379 10.5301/hipint.5000294 2-s2.0-84941272757 26351112

상세보기
6 Zuniga J. Katsavelis D. Peck J. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences BMC Research Notes 2015 8 10 p. 10 10.1186/s13104-015-0971-9 2-s2.0-84961288580 25601104

상세보기
7 Lee K. H. Kim S. J. Cha Y. H. Kim J. L. Kim D. K. Kim S. J. Three-dimensional printed prosthesis demonstrates functional improvement in a patient with an amputated thumb: a technical note Prosthetics and Orthotics International 2016 10.1177/0309364616679315 27913783

상세보기
8 Kaye R. Goldstein T. Zeltsman D. Grande D. A. Smith L. P. Three dimensional printing: a review on the utility within medicine and otolaryngology International Journal of Pediatric Otorhinolaryngology 2016 89 145 148 10.1016/j.ijporl.2016.08.007 2-s2.0-84982267573 27619046

상세보기
9 Pallari J. H. Dalgarno K. W. Woodburn J. Mass customization of foot orthoses for rheumatoid arthritis using selective laser sintering IEEE Transactions on bio-Medical Engineering 2010 57 7 1750 1756 10.1109/TBME.2010.2044178 2-s2.0-77953785691 20211798

상세보기
10 Salles A. S. Gyi D. E. The specification of personalised insoles using additive manufacturing Work 2012 41 Supplement 1 1771 1774 10.3233/WOR-2012-0383-1771 2-s2.0-84859859239 22316969

상세보기
11 Salles A. S. Gyi D. E. An evaluation of personalised insoles developed using additive manufacturing Journal of Sports Sciences 2013 31 4 442 450 10.1080/02640414.2012.736629 2-s2.0-84874809092 23083421

상세보기
12 Dombroski C. E. Balsdon M. E. Froats A. The use of a low cost 3D scanning and printing tool in the manufacture of custom-made foot orthoses: a preliminary study BMC Research Notes 2014 10 7 p. 443 10.1186/1756-0500-7-443 2-s2.0-84903865940 25015013

상세보기
13 Demers L. Monette M. Lapierre Y. Arnold D. L. Wolfson C. Reliability, validity, and applicability of the Quebec User Evaluation of Satisfaction with assistive Technology (QUEST 2.0) for adults with multiple sclerosis Disability and Rehabilitation 2002 24 1–3 21 30 11827151
14 Creylman V. Muraru L. Pallari J. Vertommen H. Peeraer L. Gait assessment during the initial fitting of customized selective laser sintering ankle foot orthoses in subjects with drop foot Prosthetics and Orthotics International 2013 37 2 132 138 10.1177/0309364612451269 2-s2.0-84879222539 22833516

상세보기

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software 원문보기

Abstract ▼ AI-Helper

참고문헌 (14)

이 논문을 인용한 문헌

연구과제 타임라인

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software 원문보기

Abstract ▼ AI-Helper

참고문헌 (14)

이 논문을 인용한 문헌

연구과제 타임라인

전체(0) 논문(0) 특허(0) 보고서(0)

전체(0) 논문(0) 특허(0) 보고서(0)

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트