최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Plastics, rubber, and composites : PRC, v.46 no.3, 2017년, pp.110 - 118
Mitsoulis, Evan (School of Mining Engineering and Metallurgy, National Technical University of Athens, Athens, Greece) , Battisti, Markus (Department of Polymer Engineering, Institute of Injection Molding of Polymers, Montanuniversitä) , Neunhäuserer, Andreas (t Leoben, Austria) , Perko, Leonhard (Department of Polymer Engineering, Institute of Injection Molding of Polymers, Montanuniversitä) , Friesenbichler, Walter (t Leoben, Austria) , Ansari, Mahmoud (Woco Industrietechnik GmbH, Bad Soden-Salmü) , Hatzikiriakos, Savvas G. (nster, Germany)
초록이 없습니다.
Perko, L., Fasching, M., Friesenbichler, W.. Model for the prediction of bulk temperature changes and pressure losses in rubber compounds flowing through conical dies: An engineering approach. Polymer engineering and science, vol.55, no.3, 701-709.
Rubber Fibres Plast Int Perko L 117 10 2015
Melt rhelolgy and its role in plastics processing - theory and applications Dealy JM 1990
Laun, Hans Martin. Pressure dependent viscosity and dissipative heating in capillary rheometry of polymer melts. Rheologica acta, vol.42, no.4, 295-308.
Laun, Hans Martin. Capillary rheometry for polymer melts revisited. Rheologica acta, vol.43, no.5, 509-528.
Bagley, E. B.. End Corrections in the Capillary Flow of Polyethylene. Journal of applied physics, vol.28, no.5, 624-627.
Cogswell, F. N.. Measuring the Extensional Rheology of Polymer Melts. Transactions of the Society of Rheology, vol.16, no.3, 383-403.
Polymer melt rhelolgy - a guide to industrial practice Cogswell FN 1981
Binding, D.M.. An approximate analysis for contraction and converging flows. Journal of non-Newtonian fluid mechanics, vol.27, no.2, 173-189.
Binding, D.M.. Further considerations of axisymmetric contraction flows. Journal of non-Newtonian fluid mechanics, vol.41, no.1, 27-42.
Padmanabhan, Mahesh, Macosko, Christopher W., Padmanabhan, M.. Extensional viscosity from entrance pressure drop measurements. Rheologica acta, vol.36, no.2, 144-151.
Ansari, Mahmoud, Zisis, Thanasis, Hatzikiriakos, Savvas G., Mitsoulis, Evan. Capillary flow of low‐density polyethylene. Polymer engineering and science, vol.52, no.3, 649-662.
J Non-Newton Fluid Mech Ansari M 18 167 2012
Papanastasiou, A. C., Scriven, L. E., Macosko, C. W.. An Integral Constitutive Equation for Mixed Flows: Viscoelastic Characterization. Journal of rheology, vol.27, no.4, 387-410.
Luo, X.‐L., Tanner, R. I.. Finite element simulation of long and short circular die extrusion experiments using integral models. International journal for numerical methods in engineering, vol.25, no.1, 9-22.
Kajiwara, T., Barakos, G., Mitsoulis, E.. Rheological Characterization of Polymer Solutions and Melts with an Integral Constitutive Equation. International journal of polymer analysis and characterization, vol.1, no.3, 201-215.
Luo, X. -L., Tanner, R. I.. A pseudo-time integral method for non-isothermal viscoelastic flows and its application to extrusion simulation. Rheologica acta, vol.26, no.6, 499-507.
Hatzikiriakos, S. G., Dealy, J. M.. Wall slip of molten high density polyethylene. I. Sliding plate rheometer studies. Journal of rheology, vol.35, no.4, 497-523.
Hatzikiriakos, Savvas G., Dealy, John M.. Wall slip of molten high density polyethylenes. II. Capillary rheometer studies. Journal of rheology, vol.36, no.4, 703-741.
Mitsoulis, Evan, Kazatchkov, Igor B., Hatzikiriakos, Savvas G.. The effect of slip in the flow of a branched PP melt: experiments and simulations. Rheologica acta, vol.44, no.4, 418-426.
Mitsoulis, E., Hatzikiriakos, S.G.. Steady flow simulations of compressible PTFE paste extrusion under severe wall slip. Journal of non-Newtonian fluid mechanics, vol.157, no.1, 26-33.
Hannachi, A., Mitsoulis, E.. Sheet coextrusion of polymer solutions and melts: Comparison between simulation and experiments. Advances in polymer technology, vol.12, no.3, 217-231.
Luo, X.‐L., Mitsoulis, E.. An efficient algorithm for strain history tracking in finite element computations of non‐Newtonian fluids with integral constitutive equations. International journal for numerical methods in fluids, vol.11, no.7, 1015-1031.
Ansari, M., Alabbas, A., Hatzikiriakos, S. G., Mitsoulis, E.. Entry Flow of Polyethylene Melts in Tapered Dies. International polymer processing : the journal of the Polymer Processing Society, vol.25, no.4, 287-296.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.