참고문헌 (13)

1. J Mater Process Tech MA Younes 171 1 83 2006 10.1016/j.jmatprotec.2005.06.052 Younes MA, Shahtout M, Damir MN (2006) A parameters design approach to improve product quality and equipment performance in hot rolling. J Mater Process Tech 171(1):83-92 

   상세보기

2. Tribol Int Z Kiral 36 9 667 2003 10.1016/S0301-679X(03)00010-0 Kiral Z, Karagülle H (2003) Simulation and analysis of vibration signals generated by rolling element bearing with defects. Tribol Int 36(9):667-678 

   상세보기

3. Int J Mach Tool Manu M Mahnama 50 7 611 2010 10.1016/j.ijmachtools.2010.03.009 Mahnama M, Movahhedy MR (2010) Prediction of machining chatter based on FEM simulation of chip formation under dynamic conditions. Int J Mach Tool Manu 50(7):611-620 

   상세보기

4. J Manuf Process PH Hu 3 2 82 2001 10.1016/S1526-6125(01)70123-5 Hu PH, Ehmann Kornel F (2001) Regenerative effect in rolling chatter. J Manuf Process 3(2):82-93 

   상세보기

5. Krot PV, Pryhodko IY, Chernov PP (2008) Regenerative chatter vibrations control in the tandem cold rolling mills. In 4th European Conference on Structural Control. ECSC 

6. Farley TWD, Rogers S, Nardini D (2006) Understanding mill vibration phenomena. In Proc. of the Int. Conf. “Vibration in rolling mills”. Inst. of Materials, Minerals and Mining, London 

7. J Adv Res A Heidari 4 1 27 2013 10.1016/j.jare.2011.12.001 Heidari A, Forouzan MR (2013) Optimization of cold rolling process parameters in order to increasing rolling speed limited by chatter vibrations. J Adv Res 4(1):27-34 

   상세보기

8. J Mater Process Tech V Panjkovic 212 4 954 2012 10.1016/j.jmatprotec.2011.12.004 Panjkovic V, Gloss R, Steward J, Dilks S, Steward R, Fraser G (2012) Causes of chatter in a hot strip mill: observations, qualitative analyses and mathematical modelling. J Mater Process Tech 212(4):954-961 

   상세보기

9. Tribol Lubr Eng R Reich 57 4 15 2001 Reich R, Panseri N, Bohaychick J (2001) The effects of lubricant starvation in the cold rolling of aluminum metal When using an oil-in-water emulsion. Tribol Lubr Eng 57(4):15-18 

10. 10.1155/2012/734510 Yang X, Li Q, Tong CN, Liu QH (2012) Vertical vibration model for unsteady lubrication in rolls-strip interface of cold rolling mills. Adv Mech Eng 734510 

    상세보기

11. Tribol Int A Maatta 34 11 779 2001 10.1016/S0301-679X(01)00074-3 Maatta A, Vuoristo P, Mantyla T (2001) Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load. Tribol Int 34(11):779-786 

    상세보기

12. J Mater Process Tech A Shirizly 97 1 61 2000 10.1016/S0924-0136(99)00339-8 Shirizly A, Lenard JG (2000) The effect of lubrication on mill loads during hot rolling of low carbon steel strips. J Mater Process Tech 97(1):61-68 

    상세보기

13. Tribol Int Q Wang 67 174 2013 10.1016/j.triboint.2013.07.010 Wang Q, Jiang Z, Zhao J, Fang M (2013) Multi-factor coupling system characteristic of the dynamic roll gap in the high-speed rolling mill during the unsteady lubrication process. Tribol Int 67:174-181 

    상세보기