참고문헌 (28)

1. Park 71 2007 

2. Hwang, Byoungchul, Lee, Tae-Ho, Shin, Jong-Ho, Lee, Jong-Wook. Effect of Cold Working on Mechanical Properties of High-Nitrogen 18Mn-18Cr Austenitic Steels. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.52, no.1, 21-29.

   상세보기

3. Milad, M., Zreiba, N., Elhalouani, F., Baradai, C.. The effect of cold work on structure and properties of AISI 304 stainless steel. Journal of materials processing technology, vol.203, no.1, 80-85.

   상세보기

4. Hedayati, A., Najafizadeh, A., Kermanpur, A., Forouzan, F.. The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel. Journal of materials processing technology, vol.210, no.8, 1017-1022.

   상세보기

5. Ghosh, S., Mallick, P., Chattopadhyay, P.. Effect of Cold Deformation on Phase Evolution and Mechanical Properties in an Austenitic Stainless Steel for Structural and Safety Applications. Journal of iron and steel research : international, vol.19, no.4, 63-68.

   상세보기

6. Shintani, T., Murata, Y.. Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction. Acta materialia, vol.59, no.11, 4314-4322.

   상세보기

7. Humphreys 164 1995 

8. Curtze, S., Kuokkala, V.T., Oikari, A., Talonen, J., Hanninen, H.. Thermodynamic modeling of the stacking fault energy of austenitic steels. Acta materialia, vol.59, no.3, 1068-1076.

   상세보기

9. Mateo 012001 2013 

10. Ahmad 012029 2014 

11. Schindler 41 2009 

12. Mangonon, Pat L., Thomas, Gareth. The martensite phases in 304 stainless steel. Metallurgical transactions, vol.1, no.6, 1577-1586.

    상세보기

13. Choi, Jeom-Yong, Jin, Won. Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels. Scripta materialia, vol.36, no.1, 99-104.

    상세보기

14. Lee 208 1993 

15. Schino, A. DI, Salvatori, I., Kenny, J. M.. Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel. Journal of materials science, vol.37, no.21, 4561-4565.

    상세보기

16. Kisko, Anna, Talonen, Juho, Porter, David Arthur, Karjalainen, Leo Pentti. Effect of Nb Microalloying on Reversion and Grain Growth in a High-Mn 204Cu Austenitic Stainless Steel. ISIJ international, vol.55, no.10, 2217-2224.

    상세보기

17. Kisko, A., Misra, R.D.K., Talonen, J., Karjalainen, L.P.. The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr-9Mn-Ni-Cu stainless steel. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.578, 408-416.

    상세보기

18. Tomimura, Kouki, Takaki, Setsuo, Tokunaga, Youichi. Reversion Mechanism from Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steels.. ISIJ international, vol.31, no.12, 1431-1437.

    상세보기

19. Kim 265 2018 

20. Zhang, Shi-Hong, Ye, Neng-Yong, Cheng, Ming, Song, Hong-Wu, Zhou, Hong-Wei, Wang, Ping-Bo. Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature. Metals, vol.6, no.1, 1-.

    상세보기

21. Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.55, no.5, 363-371.

    상세보기

22. Ghiabakloo, H., Kazeminezhad, M.. Rapid annealing of severely deformed low carbon steel in subcritical temperature range. Metals and materials international, vol.23, no.5, 984-993.

    상세보기

23. Padilha, Angelo Fernando, Plaut, Ronald Lesley, Rios, Paulo Rangel. Annealing of Cold-worked Austenitic Stainless Steels.. ISIJ international, vol.43, no.2, 135-143.

    상세보기

24. 이승용, 이상인, 황병철. 오스테나이트계 Fe-18Mn-18Cr-0.61N 고질소강의 인장 및 충격 특성에 미치는 냉간 가공의 영향. 열처리공학회지 = Journal of the Korean society for heat treatment, vol.27, no.3, 121-126.

    원문보기 상세보기

25. Tajally, M., Huda, Z., Masjuki, H.H.. A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International journal of impact engineering, vol.37, no.4, 425-432.

    상세보기

26. Singh, Dharmendra, Rao, P. Nageswara, Jayaganthan, R.. Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealing. International journal of minerals, metallurgy and materials, vol.20, no.8, 759-769.

    상세보기

27. Wawszczak, R., Baczmanski, A., Marciszko, M., Wrobel, M., Czeppe, T., Sztwiertnia, K., Braham, C., Berent, K.. Evolution of microstructure and residual stress during annealing of austenitic and ferritic steels. Materials characterization, vol.112, 238-251.

    상세보기

28. Jung 544 2017