참고문헌 (22)

1. Future Technology in Aluminum Die Casting J. Jorstad 9 18 2006 Jorstad, J., “Die Casting Engineer,” Future Technology in Aluminum Die Casting, vol. 9, pp. 18-25, 2006. 

2. Casting Plant and Technology International G. Trenda 22 1 28 2006 Trenda, G., “Die Casting Alloy for Ductile, Thin-Walled Structural Parts,” Casting Plant and Technology International, Vol. 22, No. 1, p. 28, 2006. 

3. G. Sigworth 349 2001 Proc. of the 40th Annual Conference of Metallurgists and Electrometallurgy Sigworth, G., Koch, H., and Krug, P., “High Strength, Natural Aging Aluminum Casting Alloys for Automotive Applications,” Proc. of the 40th Annual Conference of Metallurgists and Electrometallurgy, pp. 349-358, 2001. 

4. H. Koch 269 1999 North American Die Casting Association, World of Die Casting: 1999 Transactions Koch, H. and Franke, A. J., “Development of a Super Ductile High-Pressure Diecasting Alloy for Crash Relevant Parts,” North American Die Casting Association, World of Die Casting: 1999 Transactions, pp. 269-272, 1999. 

5. A. European 2018 Aluminum and Energy in the EU European Aluminium, “Aluminum and Energy in the EU,” https://www.european-aluminium.eu /(Accessed 19 MAR 2018) 

6. Aluminium for Future Generations, “Implementing the OECD Environmental Strategy Meeting,” http://primary.world-aluminium.org/home /(Accessed 19 MAR 2018) 

7. C. Schmitz 27 2006 Vulkan-Verlag GmbH Schmitz, C., “Handbook of Aluminium Recycling,” Vulkan-Verlag GmbH, pp. 27-30, 2006. 

8. Trends in Metals and Materials Engineering H. S. Kim 23 1 23 2010 10.1007/978-3-642-14877-4_2 Kim, H. S., Kim, H. M. and Kim W. Y., “Trends in the Aluminum Scrap Recycling Industry,” Trends in Metals and Materials Engineering, vol. 23, no. 1, pp. 23-30, 2010. 

   상세보기

9. Ann CIRP C. Sharma 25 1 121 1977 Sharma, C., Nakagawa, T., and Takenaka, N., “Recent Development in the Recycling of Machining SWARFs by Sintering and Powder Forging,” Ann CIRP, vol. 25, no. 1, pp. 121-125, 1977. 

10. Journal of Materials Processing Technology J. Gronostajski 64 1-3 149 1997 10.1016/S0924-0136(96)02563-0 Gronostajski, J., Kaczmar, J., Marciniak, H., and Matuszak, A., “Direct Recycling of Aluminium Chips into Extruded Products,” Journal of Materials Processing Technology, vol. 64, Nos. 1-3, pp. 149-156, 1997. 

    상세보기

11. Transactions of Nonferrous Metals Society of China C. Jirang 20 11 2057 2010 10.1016/S1003-6326(09)60417-9 Jirang, C. and Roven, H. J., “Recycling of Automotive Aluminum,” Transactions of Nonferrous Metals Society of China, vol. 20, no. 11, pp. 2057-2063, 2010. 

    상세보기

12. Metallurgical and Materials Transactions A J. M. Boileau 34 9 1807 2003 10.1007/s11661-003-0147-4 Boileau, J. M. and Allison, J. E., “The Effect of Solidification Time and Heat Treatment on the Fatigue Properties of a Cast 319 Aluminum Alloy,” Metallurgical and Materials Transactions A, vol. 34, no. 9, pp. 1807-1820, 2003. 

    상세보기

13. International Journal of Fatigue K. Sasaki 28 3 203 2006 10.1016/j.ijfatigue.2005.06.025 Sasaki, K. and Takahashi, T., “Low Cycle Thermal Fatigue and Microstructural Change of AC2B-T6 Aluminum Alloy,” International Journal of Fatigue, vol. 28, no. 3, pp. 203-210, 2006. 

    상세보기

14. Metallurgical and Materials Transactions A N. Roy 27 2 415 1996 10.1007/BF02648419 Roy, N., Samuel, A., and Samuel, F., “Porosity Formation in AI-9 Wt Pct Si-3 Wt Pct Cu Alloy Systems: Metallographic Observations,” Metallurgical and Materials Transactions A, vol. 27, no. 2, pp. 415-429, 1996. 

    상세보기

15. Journal of Materials Science and Engineering: A D. Kent 405 1-2 65 2005 10.1016/j.msea.2005.05.104 Kent, D., Schaffer, G., and Drennan, J., “Age Hardening of a Sintered Al-Cu-Mg-Si-(Sn) Alloy,” Journal of Materials Science and Engineering: A, vol. 405, Nos. 1-2, pp. 65-73, 2005. 

    상세보기

16. Metals and Materials K. D. Woo 5 4 363 1999 10.1007/BF03187759 Woo, K. D., Lee, J. S. and Kim, S. W., “Calorimetric In-Vestigation of Precipitation Kinetics in AI-Mg-Si-X(Cr, Be) Alloys,” Metals and Materials, vol. 5, no. 4, pp. 363-368, 1999. 

    상세보기

17. Materials Science and Engineering: A H. Ammar 489 1-2 426 2008 10.1016/j.msea.2007.12.032 Ammar, H., Moreau, C., Samuel, A., Samuel, F., and Doty, H., “Influences of Alloying Elements, Solution Treatment Time and Quenching Media on Quality Indices of 413-Type Al-Si Casting Alloys,” Materials Science and Engineering: A, vol. 489, Nos. 1-2, pp. 426-438, 2008. 

    상세보기

18. Transactions of the American Foundrymen’s Society N. Crowell 103 721 1995 Crowell, N. and Shivkumar, S., “Solution Treatment Effects in Cast Al-Si-Cu Alloys (95-107),” Transactions of the American Foundrymen’s Society, vol. 103, pp. 721-726, 1995. 

19. ASTM E8-04 2004 ASTM International ASTM E8-04, “Tension Testing of Metallic Materials,” ASTM International, 2004. 

20. J. R. Davis 1993 ASM International Davis, J. R., “Aluminum and Aluminum Alloys,” ASM International, 1993. 

21. Metallurgical Transactions M. C. Flemings 5 10 2121 1974 10.1007/BF02643923 Flemings, M. C., “Solidification Processing,” Metallurgical Transactions, vol. 5, no. 10, pp. 2121-2134, 1974. 

    상세보기

22. Journal of Korea Foundry Society H.-J. Kim 21 3 179 2001 Kim, H.-J., “Effects of Melt Super-Heating on the Shape Modification of β-A1FeSi Intermetallic Compound in AC2B Aluminum Alloy,” Journal of Korea Foundry Society, vol. 21, no. 3, pp. 179-186, 2001. 

    원문보기 상세보기