다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Materials science & engineering. properties, microstructure and processing. A, Structural materials, v.739, 2019년, pp.415 - 426
Hao, Kangda (The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China) , Gao, Ming (Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology, Wuhan 430074, China) , Zhang, Chen (The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China) , Wu, Run (The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China) , Zeng, Xiaoyan (Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology, Wuhan 430074, China)
AI-Helper
Abstract The continuous cold rolling of martensitic stainless steel (MSS) has not been achieved so far because of the poor weld toughness caused by the occurrence of the brittle martensite. How to improve the toughness of MSS weld is then one of the most concerned challenges in steel rolling indust...
J. Mater. Process. Technol. Khan 210 1340 2010 10.1016/j.jmatprotec.2010.03.024 Experimental investigation on laser beam welding of martensitic stainless steels in a constrained overlap joint configuration
Opt. Laser Technol. Khan 43 158 2011 10.1016/j.optlastec.2010.06.006 Experimental design approach to the process parameter optimization for laser welding of martensitic stainless steels in a constrained overlap configuration
Opt. Laser Technol. Khan 44 1611 2012 10.1016/j.optlastec.2011.11.035 Experimental investigation on seam geometry, microstructure evolution and microhardness profile of laser welded martensitic stainless steels
Int. Mater. Rev. Ribic 54 223 2009 10.1179/174328009X411163 Problems and issues in laser-arc hybrid welding
Sci. Technol. Weld. Joints Gao 13 106 2008 10.1179/174329307X249388 Weld microstructure and shape of laser-arc hybrid welding
Mater. Des. Cao 32 3399 2011 10.1016/j.matdes.2011.02.002 Hybrid fiber laser-arc welding of thick section high strength low alloy steel
J. Alloy. Compd. Tan 764 186 2018 10.1016/j.jallcom.2018.06.039 Influence of Ni coating on interfacial reactions and mechanical properties in laser welding-brazing of Mg/Ti butt joint
Metall. Mater. Trans. A Chen 47A 2866 2016 10.1007/s11661-016-3497-4 Achieving high strength joint of pure copper via laser-cold metal transfer arc hybrid welding
J. Mater. Process. Technol. Hao 245 7 2017 10.1016/j.jmatprotec.2017.02.007 Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensitic stainless steel
J. Mater. Process. Technol. Hao 251 127 2018 10.1016/j.jmatprotec.2017.08.029 Effect of Ni content on rolling toughness of laser-arc hybrid welded martensitic stainless steel
Mater. Des. Kose 64 221 2014 10.1016/j.matdes.2014.07.044 The effect of preheat & post weld heat treatment on the laser weldability of AISI 420 martensitic stainless steel
Mater. Charact. Bilmes 46 285 2001 10.1016/S1044-5803(00)00099-1 Characteristics and effects of austenite resulting from tempering of 13Cr-NiMo martensitic steel weld metals
J. Mater. Eng. Perform. Bilmes 9 6 609 2000 10.1361/105994900770345458 Toughness and microstructure of 13Cr4NiMo high-strength steel welds
Mater. Sci. Technol. Rajasekhar 24 201 2008 10.1179/174328407X179773 Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction welds
J. Mater. Process. Technol. Divya 211 2032 2011 10.1016/j.jmatprotec.2011.06.024 Improving 410NiMo weld metal toughness by PWHT
Mater. Des. Rajasekhar 30 1612 2009 10.1016/j.matdes.2008.07.042 Influence of austenitizing temperature on microstructure and mechanical properties of AISI 431 martensitic stainless steel electron beam welds
Opt. Laser Technol. Liu 80 56 2016 10.1016/j.optlastec.2015.12.020 Microstructure and mechanical properties of laser-arc hybrid welding joint of GH909 alloy
Metall. Mater. Trans. A Divya 46 2554 2015 10.1007/s11661-015-2847-y Influence of PWHT on toughness of high chromium and nickel containing martensitic stainless steel weld metals
Metall. Mater. Trans. A Divya 47 2016 10.1007/s11661-016-3481-z Effect of grain boundary character distribution on the impact toughness of 410NiMo weld metal
Mater. Sci. Eng. A Lan 529 192 2011 10.1016/j.msea.2011.09.017 Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel
Comp. Mater. Sci. Li 46 1124 2009 10.1016/j.commatsci.2009.05.021 Strengthening mechanism in micro-polycrystals with penetrable grain boundaries by discrete dislocation dynamics simulation and Hall-Petch effect
Mater. Sci. Eng. A Song 528 4075 2011 10.1016/j.msea.2011.01.078 The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels
Mater. Trans. Ning 56 581 2015 10.2320/matertrans.M2014452 Precipitation behaviors and strengthening of carbides in H13 steel during annealing
Mater. Lett. Song 13 1411 2010 10.1016/j.matlet.2010.03.021 Formation of the reversed austenite during intercritical tempering in a Fe-13%Cr-4%Ni-Mo martensitic stainless steel
J. Iron Steel Res. Int. Liu 18 60 2011 10.1016/S1006-706X(11)60118-0 Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel
Mater. Sci. Eng. A Misra 527 7779 2010 10.1016/j.msea.2010.08.051 Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe-16Cr-10Ni alloy: the effect of interstitial alloying elements and degree of austenite stability on phase reversion
Scr. Mater. Leem 45 767 2001 10.1016/S1359-6462(01)01093-4 of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13%Cr-7%Ni-3%Si martensitic stainless steel
J. Iron Steel Res. Int. Yuan 23 401 2016 10.1016/S1006-706X(16)30063-2 Microstructure evolution and precipitation behavior of 0Cr16Ni5Mo martensitic stainless steel during tempering process
Spec. Steel Jiang 30 4 2009 A study on aging dynamics of maraging stainless steel 00Cr13Ni7Mo4W2Ti
Comp. Mater. Sci. Gamsjager 32 360 2005 10.1016/j.commatsci.2004.09.031 Austenite-to-ferrite phase transformation in low-alloyed steels
Mater. Sci. Eng. A Ma 539 271 2012 10.1016/j.msea.2012.01.093 Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel
Scr. Mater. Hu 104 87 2015 10.1016/j.scriptamat.2015.04.009 The determining role of reversed austenite in enhancing toughness of a novel ultra-low carbon medium manganese high strength steel
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.