다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Applied mechanics and materials, v.465/466, 2013년, pp.911 - 915
Khairu, Kamarudin (University Tun Hussein Onn Malaysia) , Ibrahim, Mustaffa (University Tun Hussein Onn Malaysia) , Hassan, Suhaimi (Universiti Tun Hussein Onn Malaysia) , Hehsan, H. (Universiti Tun Hussein Onn Malaysia) , Kasmin, Ashari (Advance Material and Manufacturing Center (AMMC)) , Fazial, E. (Universiti Tun Hussein Onn Malaysia)
AI-Helper
This paper presents a research on 3D part fabrication from composition of photo initiator (Phenylbis (2,4,6-trimethylbenzoyl)), photo absorber (Sudan I) and 1, 6-Hexanediol polymer effect based on curing parameters. A DLP projector was used as energy light source which initiated the photo reactive p...
10.1142/5064 D Chua, C.K., Leong, K.F. and Lim, C.S. ). ed. Rapid Prototyping: Principles and Applications. World Scientific Publishing Singapore, (2003).
10.3139/9783446402690 Gebhardt, A., ed. Rapid Prototyping. Hanser Gardner Publications: Cincinnati, OH. (2003).
Ikuta K, H.K., Real three-dimensional microfabrication using stereolithography and metal mold. Proc IEEE, (International Workshop on Micro Electro Mechanical Systems(MEMS'93) (1993)pp.42-47.
Bertsch, A., Zissi, S., Jezequel, J.Y., Corbel,S. and Andre, J.C., Microstereophotolithography using a liquidcrystal display as dynamic mask-generator. Microsystem Technologies,. Vol. 3 (No. 2): (1997)pp.42-47. 10.1007/s005420050053
Bertsch A, L.H., Renaud P, 3D Microfabrication by Combining Microstereolithography and Thick resist Uv lithography. Sens Actuators, (1999): pp.14-23. 10.1016/s0924-4247(98)00249-0
Bertsch A, B.P., Vogt C, Renaud P, Rapid Prototyping of Small Size Objects. Rapid Prototyping. 6(4): (2000)pp.259-266. 10.1108/13552540010373362
Bertsch A, J.J., Andre JC Study of spatial resolution of a new 3D microfabrication process: the microstereolithography using a dynamic mask-generator technique. Jphotochem Photobiol A, 1997(107): pp.275-281. 10.1016/s1010-6030(96)04585-6
Zissi, S., Bertsch, A., Jezequel, J.Y., Corbel, S., Lougnot, D.J. and Andre, J.C., Stereolithography and microtechniques, Microsystem Technologies, Vol. 2 No. 2, (1996)pp.97-102. 10.1007/s005420050023
Cox, A.X., C. -G; Fang, N. , Microstereolitography: A Review In The Proceeding of ICOMM: International Conference on Micromanufacturing, Urbana, IL, Sept 13-15, [CD-ROM], (2006).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.