다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Advanced materials research : AMR, v.931/932, 2014년, pp.451 - 456
Khamput, Prachoom (Rajamangala University of Technology Thanyaburi) , Tantavoranart, Sompit (Rajamangala University of Technology Thanyaburi) , Suweero, Kittipong (Rajamangala University of Technology Thanyaburi)
AI-Helper
The aim of this research is to study about physical, mechanical, and thermal insulation properties of light weight concrete block products mixed with ethylene vinyl acetate plastic scrap (EVA) from shoe factories. The ratio of cement: aggregates (quarry dust + EVA): water is 1:4.5:1.66 by weight. EV...
10.1016/S0141-3910(99)00182-2 Scott, G., Green Polymer, Polym. Deg. And Stab., (2000).
Post today, Thailand exports were flat., Post today daily newspaper, issued on November 3, (2006).
Chaisupakitsin Malinee and Khuanton Ratchada, Effects of additives on polymer composites from recycled Hdpe-filled Bagasse Fibers, Journal of the National Research Council of Thailand, Year 34 Volume 2, 2545.
10.1021/bk-1992-0513.ch018 Simpson, R.J. and Selke, S. E, Composite Materials from Recycled Multilayer Polypropylene Bottles and Wood Fiber, Emerging Technology in Platics Recycling, Washing ton D.C., American Chemical Society, (1992).
Thai Industrial Standards Institutes Ministry of Industry, Industrial product standard - Interview sampling process and testing of construction material built from concrete (TIS 109-2517), Bangkok, (1974).
American Society for Testing and Materials, Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale), ASTM C62-10, Philadelphia, (2010). 10.1520/c0062
Thai Industrial Standards Institutes Ministry of Industry, Industrial product standard - drying shrinkage of concrete block (TIS 110-2517), Bangkok, (1974).
American Society for Testing and Materials, Standard Test method for steady-State Heat Flux Measurements and Thermal Transmission Properties, ASTM C177-10, Philadelphia, (2010).
American Society for Testing and Materials, Standard Test method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position, ASTM D 635-10, Philadelphia, (2010).
Jesse Edenbaum, Plastics additives and modifiers handbook, New York: Van Nostrand Reinhold, (1992).
Thai Industrial Standards Institutes Ministry of Industry, Industrial product standard -Hollow Non - Load-Bearing Concrete (TIS 58-2533), Bangkok, (1990).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.