다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Infrared physics & technology, v.96, 2019년, pp.366 - 389
Doshvarpassand, Siavash (Australasian Joint Research Center for Building Information Modelling & WA School of Mines, Curtin University) , Wu, Changzhi (Australasian Joint Research Center for Building Information Modelling, Curtin University) , Wang, Xiangyu (Australasian Joint Research Center for Building Information Modelling, Curtin University)
AI-Helper
Abstract Corrosion is considered a destructive phenomenon that affects almost all metals. There is a variety of corrosion monitoring and measurement techniques being deployed across industries. However, very few techniques are ideally characterised with non-contact, non-intrusive, on-line and direc...
J. Appl. Phys. Parker 32 9 1679 1961 10.1063/1.1728417 Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity
J. Appl. Phys. Balageas 59 2 348 1986 10.1063/1.336690 Pulsed photothermal modeling of layered materials
NDT & E Int. Lau 24 4 195 1991 10.1016/0963-8695(91)90267-7 A quantitative analysis of pulsed video thermography
Sensors Usamentiaga 14 7 12305 2014 10.3390/s140712305 Infrared thermography for temperature measurement and non-destructive testing
FLIR, Thermal imaging guidebook for industrial applications, 2017.
Meola 2012 Infrared Thermography Recent Advances and Future Trends
NDT & E Int. Almond 87 7 2017 10.1016/j.ndteint.2017.01.003 Long pulse excitation thermographic non-destructive evaluation
SIAM J. Appl. Math. Bryan 56 3 715 1996 10.1137/S0036139994277828 An inverse problem in thermal imaging
NDT & E Int. Lugin 40 3 220 2007 10.1016/j.ndteint.2006.11.001 A defect shape reconstruction algorithm for pulsed thermography
J. Res. Nondestruct. Eval. Vavilov 6 1 1 1994 10.1080/09349849409409677 Optimization of heating protocol in thermal NDT, short and long heating pulses: a discussion
NDT & E Int. Oswald-Tranta 91 36 2017 10.1016/j.ndteint.2017.06.005 Comparative study of thermal contrast and contrast in thermal signal derivatives in pulse thermography
Roberge 2000 Handbook of Corrosion Engineering
Roberge 2008 Corrosion Engineering
Int. J. Heat Mass Transf. Vavilov 39 2 355 1996 10.1016/0017-9310(95)00126-T Surface transient temperature inversion for hidden corrosion characterisation: theory and applications
Nondestruct. Testing Eval. Vavilov 22 2-3 177 2007 10.1080/10589750701448407 Pulsed thermal NDT of materials: back to the basics
N.T.S. Board, Aircraft Accident Report, Aloha Airlines Flight 243, Boeing 737-100, N73711, 1988.
Ministry in charge of the environment, D.S.B., Explosion of hydrocarbons in an urban sewerage network, 2007.
C. Jamasmie, Enbridge to pay $61 million fine for 2010 oil spills in Michigan, Illinois, 2016.
Accenture, Digital Corrosion Management: The Enormous Cost Saving Potential, 2017. <https://www.youtube.com/watch?v=1_cXhE7MzEo>.
G. Murphy, GE Digital Transformation Journey, Global Partner Summit, 2017, <https://www.ge.com/digital/partners/global-summit-competing-win>.
F. Sullivan, Analysis of the Global Corrosion Monitoring Market, Frost & Sullivan, 2016. <http://www.frost.com/sublib/display-report.do?id=MC2B-01-00-00-00>.
Farrar 1 2010 New Trends in Vibration Based Structural Health Monitoring An introduction to structural health monitoring
IFAC-PapersOnLine Worden 48 21 1 2015 10.1016/j.ifacol.2015.09.497
Technavio, Top 3 Trends Impacting the Global Corrosion Monitoring System Market Through 2021, Businesswire, 2017. <https://www.businesswire.com/news/home/20170531005921/en/Top-3-Trends-Impacting-Global-Corrosion-Monitoring>.
Infrared Phys. Technol. Bagavathiappan 60 35 2013 10.1016/j.infrared.2013.03.006 Infrared thermography for condition monitoring - a review
Eur. J. Phys. Ibarra-Castanedo 34 6 S91 2013 10.1088/0143-0807/34/6/S91 Nondestructive testing with thermography
B. Kermani, T. Chevrot, Recommended practice for corrosion management of pipelines in oil and gas production and transportation, 2012.
Liptak 2003 Instrument Engineers' Handbook, Volume One: Process Measurement and Analysis
Yang 2008 Techniques for Corrosion Monitoring
Orazem Vol. 48 2011
Electrochim. Acta Wang 283 1845 2018 10.1016/j.electacta.2018.07.113 Duplex coating combining layered double hydroxide and 8-quinolinol layers on Mg alloy for corrosion protection
J. Diabetes Sci. Technol. Bagavathiappan 4 6 1386 2010 10.1177/193229681000400613 Correlation between plantar foot temperature and diabetic neuropathy: a case study by using an infrared thermal imaging technique
Infrared Phys. Technol. Fernandez-Cuevas 71 28 2015 10.1016/j.infrared.2015.02.007 Classification of factors influencing the use of infrared thermography in humans: a review
Infrared Phys. Technol. Wang 87 83 2017 10.1016/j.infrared.2017.10.001 Heterodyne lock-in thermography of early demineralized in dental tissues
Trends Food Sci. Technol. Gowen 21 4 190 2010 10.1016/j.tifs.2009.12.002 Applications of thermal imaging in food quality and safety assessment
Comput. Electron. Agric. McManus 123 10 2016 10.1016/j.compag.2016.01.027 Infrared thermography in animal production: an overview
Int. J. Therm. Sci. Pereira 120 386 2017 10.1016/j.ijthermalsci.2017.06.025 Infrared thermography as a complementary tool for the evaluation of heat transfer in the freezing of fruit juice model solutions
Agric. Water Manage. Gago 153 9 2015 10.1016/j.agwat.2015.01.020 UAVs challenge to assess water stress for sustainable agriculture
Agric. Water Manage. Santesteban 183 49 2017 10.1016/j.agwat.2016.08.026 High-resolution UAV-based thermal imaging to estimate the instantaneous and seasonal variability of plant water status within a vineyard
J. Res. Nondestruct. Eval. Wyckhuyse 13 1 1 2001 10.1080/09349840109409682 A study of wood inspection by infrared thermography, Part I: wood pole inspection by infrared thermography
Infrared Phys. Technol. Kandemir-Yucel 49 3 243 2007 10.1016/j.infrared.2006.06.012 In situ assessment of structural timber elements of a historic building by infrared thermography and ultrasonic velocity
J. Nondestr. Eval. Lopez 32 2 172 2013 10.1007/s10921-013-0170-3 Determination of the emissivity of wood for inspection by infrared thermography
Appl. Energy Lehmann 110 29 2013 10.1016/j.apenergy.2013.03.066 Effects of individual climatic parameters on the infrared thermography of buildings
Constr. Build. Mater. Moropoulou 48 1222 2013 10.1016/j.conbuildmat.2013.03.044 Non-destructive techniques as a tool for the protection of built cultural heritage
J. Cult. Heritage Paoletti 14 2 116 2013 10.1016/j.culher.2012.05.005 Preventive thermographic diagnosis of historical buildings for consolidation
J. Cult. Heritage Bisegna 15 2 199 2014 10.1016/j.culher.2013.03.006 A qualitative method for combining thermal imprints to emerging weak points of ancient wall structures by passive infrared thermography-a case study
J. Nondestr. Eval. Edis 34 1 268 2015 10.1007/s10921-014-0268-2 Building thermography: detection of delamination of adhered ceramic claddings using the passive approach
Energy Build. Fox 92 95 2015 10.1016/j.enbuild.2015.01.021 Time-lapse thermography for building defect detection
Constr. Build. Mater. Menezes 75 283 2015 10.1016/j.conbuildmat.2014.11.039 In-situ assessment of physical performance and degradation analysis of rendering walls
J. Build. Pathol. Rehabilitation Bauer 1 1 2 2016 10.1007/s41024-016-0002-9 Facades inspection with infrared thermography: cracks evaluation
Measurement De Capua 2017 Active and eddy current pulsed thermography to detect surface crack and defect in historical and archaeological discoveries
Infrared Phys. Technol. Ibarra-Castanedo 82 56 2017 10.1016/j.infrared.2017.02.014 Solar loading thermography: time-lapsed thermographic survey and advanced thermographic signal processing for the inspection of civil engineering and cultural heritage structures
Alexandria Eng. J. Mohan 2017 Crack detection using image processing: a critical review and analysis
Visualization Eng. Ham 2 1 12 2014 10.1186/s40327-014-0012-0 3D Visualization of thermal resistance and condensation problems using infrared thermography for building energy diagnostics
Energy Build. Ferrarini 133 559 2016 10.1016/j.enbuild.2016.10.024 Thermal response measurement of building insulating materials by infrared thermography
Energy Build. Nardi 122 211 2016 10.1016/j.enbuild.2016.04.017 U-value assessment by infrared thermography: a comparison of different calculation methods in a Guarded Hot Box
Appl. Therm. Eng. Marino 114 1213 2017 10.1016/j.applthermaleng.2016.12.033 Estimation of the surface thermal resistances and heat loss by conduction using thermography
Energy Build. O’Grady 135 20 2017 10.1016/j.enbuild.2016.11.039 Infrared thermography technique as an in-situ method of assessing heat loss through thermal bridging
Energy Build. Tejedor 151 187 2017 10.1016/j.enbuild.2017.06.040 Quantitative internal infrared thermography for determining in-situ thermal behaviour of facades
Autom. Constr. Laguela 31 230 2013 10.1016/j.autcon.2012.12.013 Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes
Energy Build. Vidas 66 445 2013 10.1016/j.enbuild.2013.07.030 HeatWave: a handheld 3D thermography system for energy auditing
Appl. Math. Comput. Asdrubali 317 160 2018 Detection of thermal bridges from thermographic images by means of image processing approximation algorithms
Renew. Sustain. Energy Rev. Fox 40 296 2014 10.1016/j.rser.2014.07.188 Thermography methodologies for detecting energy related building defects
Constr. Build. Mater. Edis 51 187 2014 10.1016/j.conbuildmat.2013.10.085 Passive thermographic detection of moisture problems in facades with adhered ceramic cladding
Constr. Build. Mater. Barreira 110 251 2016 10.1016/j.conbuildmat.2016.02.026 Infrared thermography for assessing moisture related phenomena in building components
Manekiya 2016 International Conference on Communication and Signal Processing (ICCSP) Leakage detection and estimation using IR thermography
Energy Build. Barreira 140 224 2017 10.1016/j.enbuild.2017.02.009 An infrared thermography passive approach to assess the effect of leakage points in buildings
J. Cult. Heritage Jo 15 6 621 2014 10.1016/j.culher.2013.12.002 Quantitative modeling of blistering zones by active thermography for deterioration evaluation of stone monuments
NDT & E Int. Keo 62 172 2014 10.1016/j.ndteint.2013.12.002 Steel detection in reinforced concrete wall by microwave infrared thermography
Compos. B Eng. Tashan 64 116 2014 10.1016/j.compositesb.2014.04.011 Detection of cracks in concrete strengthened with CFRP systems using infra-red thermography
Constr. Build. Mater. Theodorakeas 73 417 2014 10.1016/j.conbuildmat.2014.09.089 Quantitative analysis of plastered mosaics by means of active infrared thermography
NDT & E Int. Coti 74 87 2015 10.1016/j.ndteint.2015.05.003 Determination of the applicability and limits of void and delamination detection in concrete structures using infrared thermography
Infrared Phys. Technol. Khan 69 228 2015 10.1016/j.infrared.2015.02.001 Modeling and experimental implementation of infrared thermography on concrete masonry structures
Constr. Build. Mater. Lai 87 113 2015 10.1016/j.conbuildmat.2015.03.032 Validation of size estimation of debonds in external wall’s composite finishes via passive Infrared thermography and a gradient algorithm
J. Build. Eng. Bauer 6 93 2016 10.1016/j.jobe.2016.02.012 Analysis of building facade defects using infrared thermography: laboratory studies
J. Civ. Struct. Health Monit. Matovu 6 2 303 2016 10.1007/s13349-016-0169-4 Damage assessment of steel-plate concrete composite walls by using infrared thermography: a preliminary study
Energy Build. Aversa 152 264 2017 10.1016/j.enbuild.2017.07.055 Infrared thermography for the investigation of dynamic thermal behaviour of opaque building elements: comparison between empty and filled with hemp fibres prototype walls
Energy Build. Maroy 138 175 2017 10.1016/j.enbuild.2016.10.054 Assessing the thermal performance of insulating glass units with infrared thermography: potential and limitations
Int. J. Heat Mass Transf. Serra 115 471 2017 10.1016/j.ijheatmasstransfer.2017.08.042 Heat transfer modeling using analytical solutions for infrared thermography applications in multilayered buildings systems
J. Nondestr. Eval. Coti 33 3 384 2014 10.1007/s10921-014-0232-1 Image fusion for improved detection of near-surface defects in NDT-CE using unsupervised clustering methods
Constr. Build. Mater. Rehman 107 58 2016 10.1016/j.conbuildmat.2015.12.011 Nondestructive test methods for concrete bridges: a review
Proc. Struct. Integrity Sakagami 2 2132 2016 10.1016/j.prostr.2016.06.267 Nondestructive evaluation of fatigue cracks in steel bridges based on thermoelastic stress measurement
Autom. Constr. Dabous 2017 Concrete bridge deck condition assessment using IR Thermography and Ground Penetrating Radar technologies
Proc. Eng. Jank 190 62 2017 10.1016/j.proeng.2017.05.308 Use of infrared thermography to detect defects on concrete bridges
Eng. Fract. Mech. Sakagami 2017 10.1016/j.engfracmech.2017.05.024 Verification of the repair effect for fatigue cracks in members of steel bridges based on thermoelastic stress measurement
NDT & E Int. Sultan 92 177 2017 10.1016/j.ndteint.2017.08.009 A pixel-by-pixel reliability analysis of infrared thermography (IRT) for the detection of subsurface delamination
J. Civ. Struct. Health Monit. Hiasa 6 3 619 2016 10.1007/s13349-016-0180-9 Infrared thermography for civil structural assessment: demonstrations with laboratory and field studies
Comput. Struct. Hiasa 190 205 2017 10.1016/j.compstruc.2017.05.011 A data processing methodology for infrared thermography images of concrete bridges
J. Nondestr. Eval. Hiasa 36 3 57 2017 10.1007/s10921-017-0435-3 Effect of defect size on subsurface defect detectability and defect depth estimation for concrete structures by infrared thermography
Constr. Build. Mater. Hiasa 150 295 2017 10.1016/j.conbuildmat.2017.05.175 Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling
Sci. China Technol. Sci. Sun 1 2017 Thermography analyses of rock fracture due to excavation and overloading for tunnel in 30° inclined strata
Transport. Res. Part C: Emerg. Technol. Plati 46 192 2014 10.1016/j.trc.2014.05.013 Use of infrared thermography for assessing HMA paving and compaction
NDT & E Int. Solla 62 55 2014 10.1016/j.ndteint.2013.11.006 Approach to identify cracking in asphalt pavement using GPR and infrared thermographic methods: preliminary findings
Proc. Eng. Carreno-Alvarado 89 1445 2014 10.1016/j.proeng.2014.11.471 Identification of buried pipes using thermal images and data mining
Sol. Energy Baldinelli 113 281 2015 10.1016/j.solener.2015.01.011 Spaceborne detection of roof and impervious surface albedo: potentialities and comparison with airborne thermography measurements
Pattern Recogn. Lett. Berg 83 215 2016 10.1016/j.patrec.2016.07.002 Enhanced analysis of thermographic images for monitoring of district heat pipe networks
10.1109/PRRS.2014.6914288 A. Berg, J. Ahlberg, Classification of leakage detections acquired by airborne thermography of district heating networks. in: 2014 8th IAPR Workshop on Pattern Recognition in Remote Sensing (PRRS), IEEE, 2014.
IEEE Trans. Geosci. Remote Sens. Friman 52 8 5175 2014 10.1109/TGRS.2013.2287238 Methods for large-scale monitoring of district heating systems using airborne thermography
J. Hydrol. Ala-aho 522 391 2015 10.1016/j.jhydrol.2014.12.054 Fully integrated surface-subsurface flow modelling of groundwater-lake interaction in an esker aquifer: model verification with stable isotopes and airborne thermal imaging
ISPRS J. Photogramm. Remote Sens. Yahyanejad 104 189 2015 10.1016/j.isprsjprs.2014.07.015 A fast and mobile system for registration of low-altitude visual and thermal aerial images using multiple small-scale UAVs
Infrared Phys. Technol. Lee 78 223 2016 10.1016/j.infrared.2016.08.009 Early sinkhole detection using a drone-based thermal camera and image processing
Renew. Energy Nishar 86 1256 2016 10.1016/j.renene.2015.09.042 Thermal infrared imaging of geothermal environments and by an unmanned aerial vehicle (UAV): a case study of the Wairakei-Tauhara geothermal field, Taupo, New Zealand
10.1049/cp.2016.1087 G. Tanda et al., Monitoring of biogas emissions from an urban landfill by means of close-range aerial infrared thermography, 2016.
Infrared Phys. Technol. Peng 57 89 2013 10.1016/j.infrared.2012.12.010 Lock-in thermographic inspection of squats on rail steel head
Eng. Fail. Anal. Peng 28 275 2013 10.1016/j.engfailanal.2012.10.024 Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects
10.1109/ICTIA.2014.7883754 A. Elhassnaoui et al., Modeling by finite element method of detecting rail squat by pulsed thermography, in: Information and Communication Technologies Innovation and Application (ICTIA), IEEE, 2014.
Sens. Actuators, A Gao 234 269 2015 10.1016/j.sna.2015.09.011 Multiple cracks detection and visualization using magnetic flux leakage and eddy current pulsed thermography
NDT & E Int. Peng 74 72 2015 10.1016/j.ndteint.2015.05.006 Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization
Infrared Phys. Technol. Tang 87 31 2017 10.1016/j.infrared.2017.09.013 Infrared and visible images registration with adaptable local-global feature integration for rail inspection
Eng. Fract. Mech. Bendada 108 195 2013 10.1016/j.engfracmech.2013.02.030 How to reveal subsurface defects in Kevlar® composite materials after an impact loading using infrared vision and optical NDT techniques?
IEEE Trans. Instrum. Meas. Cheng 62 5 1215 2013 10.1109/TIM.2013.2243505 Transient thermal behavior of eddy-current pulsed thermography for nondestructive evaluation of composites
Compos. B Eng. Junyan 45 1 138 2013 10.1016/j.compositesb.2012.09.006 Experimental study on active infrared thermography as a NDI tool for carbon-carbon composites
Electron. Lett. Mulaveesala 49 2 118 2013 10.1049/el.2012.3844 Applications of non-stationary thermal wave imaging methods for characterisation of fibre-reinforced plastic materials
Quant. InfraRed Thermogr. J. Usamentiaga 10 1 55 2013 10.1080/17686733.2013.774623 A quantitative comparison of stimulation and post-processing thermographic inspection methods applied to aeronautical carbon fibre reinforced polymer
Infrared Phys. Technol. Yang 60 166 2013 10.1016/j.infrared.2013.04.010 Defect detection and evaluation of ultrasonic infrared thermography for aerospace CFRP composites
Infrared Phys. Technol. Chiwu 65 117 2014 10.1016/j.infrared.2014.04.006 Inspection on CFRP sheet with subsurface defects using pulsed thermographic technique
10.1109/I2MTC.2014.6861009 A. Foudazi, K.M. Donnell, M.T. Ghasr, Application of active microwave thermography to delamination detection, in: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, IEEE.
Mater. Des. Grammatikos 55 429 2014 10.1016/j.matdes.2013.09.019 Current injection phase thermography for low-velocity impact damage identification in composite laminates
Compos. B Eng. Maierhofer 64 175 2014 10.1016/j.compositesb.2014.04.027 Validation of flash thermography using computed tomography for characterizing inhomogeneities and defects in CFRP structures
Russ. J. Nondestr. Test. Vavilov 50 11 679 2014 10.1134/S1061830914110096 A thermal tomographic unit for testing composite materials
10.1109/SPACES.2015.7058211 G. Dua, G.V. Subbarao, R. Mulaveesala, Testing and evaluation of glass fiber reinforced polymers by thermal wave imaging, in: International Conference on Signal Processing And Communication Engineering Systems (SPACES), 2015, IEEE.
IEEE Sens. J. Ghali 15 12 6761 2015 10.1109/JSEN.2015.2472286 Data fusion for enhanced defect detectability in non-stationary thermal wave imaging
Proc. CIRP Jolly 38 129 2015 10.1016/j.procir.2015.07.043 Review of non-destructive testing (NDT) techniques and their applicability to thick walled composites
Compos. B Eng. Keo 69 1 2015 10.1016/j.compositesb.2014.09.018 Defect detection in CFRP by infrared thermography with CO2 laser excitation compared to conventional lock-in infrared thermography
Int. J. Thermophys. Liu 36 5-6 1226 2015 10.1007/s10765-014-1717-y Three-dimensional visualization of subsurface defect using lock-in thermography
Compos. Struct. Meola 134 845 2015 10.1016/j.compstruct.2015.08.119 Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics
Mater. Struct. Foudazi 49 12 5051 2016 10.1617/s11527-016-0843-3 Evaluation of steel fiber distribution in cement-based mortars using active microwave thermography
Halloua 2016 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM) Nondestructive inverse approach for determining thermal and geometrical properties of internal defects in CFRP composites by lock-in thermography
Proc. Eng. Maio 167 71 2016 10.1016/j.proeng.2016.11.671 Ultrasonic and IR thermographic detection of a defect in a multilayered composite plate
Proc. Eng. Pastuszak 157 325 2016 10.1016/j.proeng.2016.08.373 Characterization of defects in curved composite structures using active infrared thermography
10.1109/IICIP.2016.7975332 D. Roy, S. Tuli, Efficient SNR determination algorithm for lock-in thermogaphy defect detection and quantification, in: 1st India International Conference on Information Processing (IICIP), IEEE, 2016.
J. Nondestr. Eval. Abdulrahman 36 4 72 2017 10.1007/s10921-017-0450-4 A Taguchi design of experiment approach to pulse and lock in thermography, applied to CFRP composites
Int. J. Therm. Sci. Chrysafi 116 242 2017 10.1016/j.ijthermalsci.2017.02.017 Damage detection on composite materials with active thermography and digital image processing
J. Nondestr. Eval. Khodayar 36 2 32 2017 10.1007/s10921-017-0412-x Optimization of the inspection of large composite materials using robotized line scan thermography
10.1109/MILTECHS.2017.7988817 V. Tiska, O. Fla？ar, Non-destructive inspection of composite specimen with integrated lightning protection using pulsed thermography, in: International Conference on Military Technologies (ICMT), IEEE, 2017.
Proc. CIRP Zaiß 62 33 2017 10.1016/j.procir.2016.06.039 Use of thermography and ultrasound for the quality control of SMC lightweight material reinforced by carbon fiber tapes
Polym. Sci., Ser. D Zorin 10 3 241 2017 10.1134/S1995421217030212 Detection of defects in components made of dispersion-filled polymeric materials by the method of infrared thermography
Compos. B Eng. Marani 135 129 2018 10.1016/j.compositesb.2017.10.010 Modeling and classification of defects in CFRP laminates by thermal non-destructive testing
NDT & E Int. Peeters 93 141 2018 10.1016/j.ndteint.2017.10.006 Optimised dynamic line scan thermographic detection of CFRP inserts using FE updating and POD analysis
NDT & E Int. Ptaszek 59 48 2013 10.1016/j.ndteint.2013.05.001 Transient thermography testing of unpainted thermal barrier coating (TBC) systems
J. Nondestr. Eval. Ghiassi 33 3 427 2014 10.1007/s10921-014-0238-8 FRP-to-masonry bond durability assessment with infrared thermography method
Infrared Phys. Technol. Lizaranzu 71 113 2015 10.1016/j.infrared.2015.02.006 Non-destructive testing of composite materials by means of active thermography-based tools
Exp. Mech. Wu 55 8 1485 2015 10.1007/s11340-015-9997-0 Non-destructive inspection of adhesively bonded joints using amplitude modulated thermography
Appl. Therm. Eng. Abreu 100 1173 2016 10.1016/j.applthermaleng.2016.02.078 Thermography detection of contact failures in double layered materials using the reciprocity functional approach
Infrared Phys. Technol. Daryabor 76 608 2016 10.1016/j.infrared.2016.04.009 Investigation of defect characteristics and heat transfer in step heating thermography of metal plates repaired with composite patches
NDT & E Int. Barus 85 27 2017 10.1016/j.ndteint.2016.10.003 Bonded repair issues for composites: an investigation approach based on infrared thermography
Polym. Test. Guo 57 226 2017 10.1016/j.polymertesting.2016.11.026 A phase sensitive modulated thermography of debondings in the insulator of SRMs
Infrared Phys. Technol. Zhao 81 69 2017 10.1016/j.infrared.2016.12.020 Application of lock-in thermography for the inspection of disbonds in titanium alloy honeycomb sandwich structure
NDT & E Int. Barus 93 157 2018 10.1016/j.ndteint.2017.10.005 NDT-based design of joint material for the detection of bonding defects by infrared thermography
Compos. B Eng. Ren 54 169 2013 10.1016/j.compositesb.2013.05.004 Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography
Infrared Phys. Technol. Usamentiaga 58 36 2013 10.1016/j.infrared.2013.01.004 Automatic detection of impact damage in carbon fiber composites using active thermography
NDT & E Int. Usamentiaga 54 123 2013 10.1016/j.ndteint.2012.12.011 Feature extraction and analysis for automatic characterization of impact damage in carbon fiber composites using active thermography
Compos. B Eng. He 59 196 2014 10.1016/j.compositesb.2013.12.005 Non-destructive testing of low-energy impact in CFRP laminates and interior defects in honeycomb sandwich using scanning pulsed eddy current
Int. J. Impact Eng. Meola 67 1 2014 10.1016/j.ijimpeng.2013.12.010 Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects
Compos. B Eng. Schmutzler 59 221 2014 10.1016/j.compositesb.2013.12.010 Degradation monitoring of impact damaged carbon fibre reinforced polymers under fatigue loading with pulse phase thermography
Compos. B Eng. Boccardi 90 179 2016 10.1016/j.compositesb.2015.12.004 Effects of interface strength gradation on impact damage mechanisms in polypropylene/woven glass fabric composites
NDT & E Int. Li 83 114 2016 10.1016/j.ndteint.2016.06.008 Investigation on the damage evolution in the impacted composite material based on active infrared thermography
Compos. Struct. Liang 143 352 2016 10.1016/j.compstruct.2016.02.039 Low energy impact damage detection in CFRP using eddy current pulsed thermography
Proc. Eng. Meola 167 23 2016 10.1016/j.proeng.2016.11.665 Infrared thermography to an aluminium foam sandwich structure subjected to low velocity impact tests
Compos. B Eng. Taraghi 103 51 2016 10.1016/j.compositesb.2016.08.009 Non-destructive evaluation of damage modes in nanocomposite foam-core sandwich panel subjected to low-velocity impact
J. Nondestr. Eval. Fierro 36 4 69 2017 10.1007/s10921-017-0449-x Imaging of barely visible impact damage on a complex composite stiffened panel using a nonlinear ultrasound stimulated thermography approach
NDT & E Int. Meola 85 34 2017 10.1016/j.ndteint.2016.10.004 Impact damaging of composites through online monitoring and non-destructive evaluation with infrared thermography
Compos. Struct. Colombo 184 279 2018 10.1016/j.compstruct.2017.10.001 Thermographic stepwise assessment of impact damage in sandwich panels
Compos. B Eng. Dattoma 47 283 2013 10.1016/j.compositesb.2012.10.030 Evaluation of energy of fatigue damage into GFRC through digital image correlation and thermography
Compos. Struct. Garnier 100 443 2013 10.1016/j.compstruct.2012.12.025 Fatigue behavior of impacted composite structures
Compos. B Eng. Goidescu 48 95 2013 10.1016/j.compositesb.2012.11.016 Damage investigation in CFRP composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and X-ray tomography
Mech. Res. Commun. Kordatos 54 14 2013 10.1016/j.mechrescom.2013.09.005 Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission
Compos. A Appl. Sci. Manuf. Lisle 53 75 2013 10.1016/j.compositesa.2013.06.004 Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography
Compos. B Eng. Harizi 59 74 2014 10.1016/j.compositesb.2013.11.021 Mechanical damage assessment of glass fiber-reinforced polymer composites using passive infrared thermography
Compos. B Eng. Montesano 60 137 2014 10.1016/j.compositesb.2013.12.053 Application of infrared thermography for the characterization of damage in braided carbon fiber reinforced polymer matrix composites
Polym. Test. Vavilov 41 55 2015 10.1016/j.polymertesting.2014.10.010 Infrared thermographic evaluation of large composite grid parts subjected to axial loading
Compos. B Eng. Munoz 85 68 2016 10.1016/j.compositesb.2015.09.011 Damage detection in CFRP by coupling acoustic emission and infrared thermography
Compos. B Eng. Palumbo 103 60 2016 10.1016/j.compositesb.2016.08.007 A new rapid thermographic method to assess the fatigue limit in GFRP composites
NDT & E Int. Shin 79 7 2016 10.1016/j.ndteint.2015.11.008 Pulsed phase thermography imaging of fatigue-loaded composite adhesively bonded joints
Compos. B Eng. Tamborrino 91 337 2016 10.1016/j.compositesb.2016.01.059 Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methods
Compos. Sci. Technol. Elsherbini 146 49 2017 10.1016/j.compscitech.2017.04.006 Fatigue threshold-stress determination in AFP laminates containing gaps using IR thermography
H. Cui et al., The methods in infrared thermal imaging diagnosis technology of power equipment, in: IEEE 4th International Conference on Electronics Information and Emergency Communication (ICEIEC), IEEE, 2013.
Infrared Phys. Technol. Huda 61 184 2013 10.1016/j.infrared.2013.04.012 Suitable features selection for monitoring thermal condition of electrical equipment using infrared thermography
ISA Trans. Huda 53 3 717 2014 10.1016/j.isatra.2014.02.003 A new thermographic NDT for condition monitoring of electrical components using ANN with confidence level analysis
Microelectron. Reliab. Endo 55 9-10 1628 2015 10.1016/j.microrel.2015.06.031 Thermoreflectance mapping observation of Power MOSFET under UIS avalanche breakdown condition
10.1109/ChiCC.2015.7260642 Z. Hui, H. Fuzhen, An intelligent fault diagnosis method for electrical equipment using infrared images, in: 34th Chinese Control Conference (CCC), IEEE, 2015.
10.1109/PCICON.2015.7435100 Y.-W.A. Wang et al., Equipment monitoring for temperature related failures using thermography cameras, in: IEEE Petroleum and Chemical Industry Committee Conference (PCIC), IEEE, 2015.
10.1109/DEMPED.2017.8062413 M.A. Herrera-Arellano et al., Infrared thermography-based automatic assessment of control components for electric machines, in: IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), IEEE, 2017.
J. Electr. Syst. Inf. Technol. Kumar 2017 Condition monitoring of electrical assets using digital IRT and AI technique
10.1109/ELMA.2017.7955462 E. Mechkov, Application of infrared thermography technique in transformers maintenance in distribution network, in: 15th International Conference on Electrical Machines, Drives and Power Systems (ELMA), IEEE, 2017.
10.1109/ICEPT.2013.6756600 L. Chengyan, Q. Fei, B. Zhaowei, Non-destructive testing for defects in electronic package based on Infrared Thermography, in: 14th International Conference on Electronic Packaging Technology (ICEPT), IEEE, 2013.
Infrared Phys. Technol. Lu 63 97 2014 10.1016/j.infrared.2013.12.019 Defects inspection of the solder bumps using self reference technology in active thermography
10.1109/THERMINIC.2015.7389622 D. May et al., IR pulse thermography as failure analytical tool applied to die attach processes, in: 21st International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), IEEE, 2015.
Infrared Phys. Technol. He 81 236 2017 10.1016/j.infrared.2017.01.008 Detection of micro solder balls using active thermography and probabilistic neural network
Microelectron. Reliab. Xu 54 4 808 2014 10.1016/j.microrel.2013.12.015 Using active thermography for defects inspection of flip chip
Opt. Lasers Eng. An 73 128 2015 10.1016/j.optlaseng.2015.04.013 Line laser lock-in thermography for instantaneous imaging of cracks in semiconductor chips
J. Braz. Soc. Mech. Sci. Eng. Macarios 37 1 275 2015 10.1007/s40430-014-0148-9 Infrared thermal imaging analysis of a 1-kW variable capacity compressor frequency inverter
Infrared Phys. Technol. Muzaffar 71 464 2015 10.1016/j.infrared.2015.06.010 Fault detection of antenna arrays using infrared thermography
10.1109/MetroAeroSpace.2016.7573210 E. Johnson, Y. Kim, IR testing of microwave circulator bonds, in: IEEE Metrology for Aerospace (MetroAeroSpace), IEEE, 2016.
10.1109/SIBCON.2016.7491809 K.O. Petrosyants et al., Hardware-software subsystem for multilevel thermal fault detection and analysis of electronic components. in: International Siberian Conference on Control and Communications (SIBCON), IEEE, 2016.
J. Mater. Process. Technol. Yang 229 94 2016 10.1016/j.jmatprotec.2015.09.020 Multi-spot laser lock-in thermography for real-time imaging of cracks in semiconductor chips during a manufacturing process
Microelectron. Reliab. Al-Obaidy 71 56 2017 10.1016/j.microrel.2017.02.013 Fault detection using thermal image based on soft computing methods: comparative study
Appl. Therm. Eng. Kijkanjanapaiboon 113 673 2017 10.1016/j.applthermaleng.2016.11.014 Investigation of dimensional and heat source effects in Lock-In Thermography applications in semiconductor packages
NDT & E Int. Sharp 64 41 2014 10.1016/j.ndteint.2014.02.006 Lithium-ion battery electrode inspection using pulse thermography
J. Power Sources Bazinski 305 97 2016 10.1016/j.jpowsour.2015.11.083 Predicting heat generation in a lithium-ion pouch cell through thermography and the lumped capacitance model
Measurement Just 89 312 2016 10.1016/j.measurement.2016.04.001 A method to quantify coating thickness and porosity of electrodes for lithium-ion-batteries
Microelectron. Reliab. Zhou 79 48 2017 10.1016/j.microrel.2017.10.013 Cycle life estimation of lithium-ion polymer batteries using artificial neural network and support vector machine with time-resolved thermography
10.1109/AUPEC.2013.6725391 K. Buttery, S. Alahakoon, Improving condition monitoring & fault diagnosis strategy for HV motors in coal fired power stations, in: Australasian Universities Power Engineering Conference (AUPEC), IEEE, 2013.
Infrared Phys. Technol. Eftekhari 61 330 2013 10.1016/j.infrared.2013.10.001 A novel indicator of stator winding inter-turn fault in induction motor using infrared thermal imaging
J. Mech. Sci. Technol. Lim 28 8 2947 2014 10.1007/s12206-014-0701-6 Fault diagnosis of rotating machine by thermography method on support vector machine
Measurement Glowacz 93 86 2016 10.1016/j.measurement.2016.07.008 Diagnostics of stator faults of the single-phase induction motor using thermal images, MoASoS and selected classifiers
10.1109/ICEEOT.2016.7755208 Q. Khan, A.A. Khan, F. Ahmad, Condition monitoring tool for electrical equipment-thermography, in: International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), IEEE, 2016.
10.1109/IECON.2016.7793682 O. Munoz-Ornelas et al., Methodology for thermal analysis of induction motors with infrared thermography considering camera location, in: IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2016.
10.1109/IECON.2016.7793158 J.A. Ramirez-Nunez et al., Self-adjustment methodology of a thermal camera for detecting faults in industrial machinery, in:IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2016.
10.1109/ICPES.2016.7584040 G. Singh, T.C.A. Kumar, V. Naikan, Fault diagnosis of induction motor cooling system using infrared thermography, in: IEEE 6th International Conference on Power Systems (ICPS), IEEE, 2016.
Electr. Eng. dos Santos 1 2017 Thermography and artificial intelligence in transformer fault detection
Infrared Phys. Technol. Glowacz 81 7 2017 10.1016/j.infrared.2016.12.003 Diagnosis of the three-phase induction motor using thermal imaging
IEEE Trans. Ind. Appl. Lopez-Perez 53 3 1901 2017 10.1109/TIA.2017.2655008 Application of infrared thermography to failure detection in industrial induction motors: case stories
10.1109/DEMPED.2017.8062416 P. Redon et al, Reliable methodology for online fault diagnosis in induction motors using passive infrared thermography, in: IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), IEEE, 2017.
10.1109/DEMPED.2017.8062412 E. Resendiz-Ochoa et al., Segmentation in thermography images for bearing defect analysis in induction motors, in: IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), IEEE, 2017.
Infrared Phys. Technol. Singh 87 134 2017 10.1016/j.infrared.2017.10.007 Infrared thermography based diagnosis of inter-turn fault and cooling system failure in three phase induction motor
Infrared Phys. Technol. Janssens 73 78 2015 10.1016/j.infrared.2015.09.004 Thermal image based fault diagnosis for rotating machinery
IFAC-PapersOnLine Mohanty 48 21 554 2015 10.1016/j.ifacol.2015.09.584 Shaft misalignment detection by thermal imaging of support bearings
Nucl. Eng. Des. Kim 264 103 2013 10.1016/j.nucengdes.2013.07.002 Measurement of wetted area fraction in subcooled pool boiling of water using infrared thermography
Fusion Eng. Des. Courtois 89 9-10 2472 2014 10.1016/j.fusengdes.2014.01.022 IR thermography diagnostics for the WEST project
Fusion Eng. Des. Kamiya 89 12 3089 2014 10.1016/j.fusengdes.2014.09.011 Design study of a wide-angle infrared thermography and visible observation diagnostic on JT-60SA
Nucl. Instrum. Methods Phys. Res., Sect. A Semerok 738 25 2014 10.1016/j.nima.2013.11.100 Active laser pyrometry and lock-in thermography for characterisation of deposited layer on TEXTOR graphite tile
Fusion Eng. Des. Pei 109 1237 2016 10.1016/j.fusengdes.2015.11.055 Simulation of surface cracks measurement in first walls by laser spot array thermography
Exp. Therm. Fluid Sci. Karadeniz 44 334 2013 10.1016/j.expthermflusci.2012.07.005 Experimental visualization of the flow characteristics of the outflow of a split air conditioner indoor unit by meshed infrared thermography and stereo particle image velocimetry
Int. J. Heat Fluid Flow Vintrou 44 197 2013 10.1016/j.ijheatfluidflow.2013.05.019 Quantitative infrared investigation of local heat transfer in a circular finned tube heat exchanger assembly
Int. J. Refrig. Longo 57 77 2015 10.1016/j.ijrefrig.2015.04.017 HFC32 vaporisation inside a brazed plate heat exchanger (BPHE): experimental measurements and IR thermography analysis
Int. J. Hydrogen Energy Fu 41 41 18610 2016 10.1016/j.ijhydene.2016.08.023 Real-time monitoring of a micro reformer integrated with a microchannel heat exchanger by infrared thermography and high-speed flow images
Energy Proc. Breitenstein 38 2 2013 10.1016/j.egypro.2013.07.243 Comparison of DLIT-and PL-based local solar cell efficiency analysis
Energy Proc. Ramspeck 55 133 2014 10.1016/j.egypro.2014.08.097 In-line thermography for reliable hot spot detection and process control
Appl. Therm. Eng. Wiengmoon 70 1 350 2014 10.1016/j.applthermaleng.2014.05.023 Quantifying the uniformity of solar cells using thermal imaging diagnosis
Sol. Energy Mater. Sol. Cells Gerber 135 35 2015 10.1016/j.solmat.2014.09.020 Advanced large area characterization of thin-film solar modules by electroluminescence and thermography imaging techniques
Sol. Energy Mater. Sol. Cells Kaden 142 24 2015 10.1016/j.solmat.2015.05.028 Power loss prognosis from thermographic images of PID affected silicon solar modules
10.1109/DEMISEE.2016.7530481 J. Packa et al., Chosen diagnostic methods of photovoltaic modules, in: Diagnostic of Electrical Machines and Insulating Systems in Electrical Engineering (DEMISEE), IEEE, 2016.
Renew. Sustain. Energy Rev. Tsanakas 62 695 2016 10.1016/j.rser.2016.04.079 Faults and infrared thermographic diagnosis in operating c-Si photovoltaic modules: a review of research and future challenges
Infrared Phys. Technol. Vetter 76 439 2016 10.1016/j.infrared.2016.03.020 Automatized segmentation of photovoltaic modules in IR-images with extreme noise
Infrared Phys. Technol. Alvarez-Tey 2017 10.1016/j.infrared.2017.09.022 Analysis of the configuration and the location of thermographic equipment for the inspection in photovoltaic systems
Renew. Sustain. Energy Rev. Du 78 1117 2017 10.1016/j.rser.2017.05.017 Nondestructive inspection, testing and evaluation for Si-based, thin film and multi-junction solar cells: an overview
Sol. Energy Mater. Sol. Cells Fruhauf 169 195 2017 10.1016/j.solmat.2017.05.015 DLIT-versus ILIT-based efficiency imaging of solar cells
10.1109/ICCEP.2017.8004778 P. Guerriero, S. Daliento, Automatic edge identification for accurate analysis of thermographic images of solar panels, in: 6th International Conference on Clean Electrical Power (ICCEP), IEEE, 2017.
Infrared Phys. Technol. Jaffery 83 182 2017 10.1016/j.infrared.2017.04.015 Scheme for predictive fault diagnosis in photo-voltaic modules using thermal imaging
Int. J. Heat Fluid Flow Tiddens 65 105 2017 10.1016/j.ijheatfluidflow.2017.04.002 Induced Infrared Thermography: flow visualizations under the extreme conditions of an open volumetric receiver of a solar tower
IEEE J. Photovoltaics Vergura 7 1 237 2017 10.1109/JPHOTOV.2016.2614860 A quantitative and computer-aided thermography-based diagnostics for PV devices-Part II: platform and results
Infrared Phys. Technol. Zeng 64 73 2014 10.1016/j.infrared.2013.12.011 Breakpoint detection of heating wire in wind blade moulds using infrared thermography
IEEE Trans. Ind. Electron. Gao 63 10 6305 2016 10.1109/TIE.2016.2574987 Multidimensional tensor-based inductive thermography with multiple physical fields for offshore wind turbine gear inspection
Infrared Phys. Technol. Worzewski 76 756 2016 10.1016/j.infrared.2016.04.011 Thermographic inspection of a wind turbine rotor blade segment utilizing natural conditions as excitation source, Part I: solar excitation for detecting deep structures in GFRP
Renew. Sustain. Energy Rev. Yang 60 1225 2016 10.1016/j.rser.2016.02.026 Progress and trends in nondestructive testing and evaluation for wind turbine composite blade
Proc. Eng. Hwang 188 225 2017 10.1016/j.proeng.2017.04.478 Continuous line laser thermography for damage imaging of rotating wind turbine blades
Nucl. Eng. Des. Kim 262 39 2013 10.1016/j.nucengdes.2013.03.027 Investigation of optimal thermal injection conditions and the capability of IR thermography for detecting wall-thinning defects in small-diameter piping components
Exp. Mech. Manohar 53 4 661 2013 10.1007/s11340-012-9670-9 Determination of defect depth and size using virtual heat sources in pulsed infrared thermography
S.P.T. Quoc, G. Cheymol, A. Semerok, Phase lock-in thermography for metal walls characterization, in: 3rd International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), IEEE, 2013.
J. Nondestr. Eval. Sharath 32 2 134 2013 10.1007/s10921-012-0166-4 Defect characterization using pulsed thermography
Russ. J. Nondestr. Test. Vavilov 49 11 619 2013 10.1134/S1061830913110089 An apparatus for the active thermal testing of corrosion in steel cylindrical containers and test results
Corros. Sci. He 78 1 2014 10.1016/j.corsci.2013.09.001 An investigation into eddy current pulsed thermography for detection of corrosion blister
Infrared Phys. Technol. Lahiri 64 125 2014 10.1016/j.infrared.2014.02.004 Infrared thermography based defect detection in ferromagnetic specimens using a low frequency alternating magnetic field
Infrared Phys. Technol. Liu 62 136 2014 10.1016/j.infrared.2013.11.006 Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI)
CIRP Ann.-Manuf. Technol. Mehnen 63 1 33 2014 10.1016/j.cirp.2014.03.016 Automated in-service damage identification
10.1109/ICTIA.2014.7883756 A. Saifi et al., Detection of the thickness of scale on the inner surface of water pipes by infrared thermography, in: Information and Communication Technologies Innovation and Application (ICTIA), IEEE, 2014.
IEEE Trans. Instrum. Meas. Foudazi 64 9 2583 2015 10.1109/TIM.2015.2450353 Characterization of corroded reinforced steel bars by active microwave thermography
Int. J. Precis. Eng. Manuf. Ranjit 16 11 2255 2015 10.1007/s12541-015-0290-z Investigation of lock-in infrared thermography for evaluation of subsurface defects size and depth
J. Nondestr. Eval. Arora 35 1 15 2016 10.1007/s10921-015-0333-5 Effect of spectral reshaping on frequency modulated thermal wave imaging for non-destructive testing and evaluation of steel material
J. Nondestr. Eval. Cadelano 35 3 49 2016 10.1007/s10921-016-0365-5 Corrosion detection in pipelines using infrared thermography: experiments and data processing methods
Infrared Phys. Technol. Wony 76 574 2016 10.1016/j.infrared.2016.04.005 Infrared radiation emitted due to scanning of a hot spot as a probe of hidden defects
NDT & E Int. Xu 84 27 2016 10.1016/j.ndteint.2016.07.002 Investigation on eddy current pulsed thermography to detect hidden cracks on corroded metal surface
Proc. Struct. Integrity El-amiri 5 1065 2017 10.1016/j.prostr.2017.07.078 Detection of corrosion depth in bolts by thermographic model
J. Nondestr. Eval. Inglese 36 3 61 2017 10.1007/s10921-017-0440-6 A procedure for detecting hidden surface defects in a thin plate by means of active thermography
NDT & E Int. Tinsley 92 67 2017 10.1016/j.ndteint.2017.08.001 A study of pulsed thermography for life assessment of thin EB-PVD TBCs undergoing oxidation ageing
Ocean Eng. Yang 147 277 2018 10.1016/j.oceaneng.2017.09.023 Through coating imaging and nondestructive visualization evaluation of early marine corrosion using electromagnetic induction thermography
Infrared Phys. Technol. Benmoussat 61 68 2013 10.1016/j.infrared.2013.07.007 Automatic metal parts inspection: use of thermographic images and anomaly detection algorithms
Infrared Phys. Technol. Guo 61 149 2013 10.1016/j.infrared.2013.08.003 Crack detection in aluminum parts by using ultrasound-excited infrared thermography
Surf. Coat. Technol. Schweda 217 124 2013 10.1016/j.surfcoat.2012.12.002 Thermographic analysis and modelling of the delamination crack growth in a thermal barrier coating on Fecralloy substrate
J. Nondestr. Eval. Fedala 33 3 335 2014 10.1007/s10921-013-0218-4 Infrared lock-in thermography crack localization on metallic surfaces for industrial diagnosis
Int. J. Thermophys. Celorrio 36 5-6 1202 2015 10.1007/s10765-014-1676-3 Advances in crack characterization by lock-in infrared thermography
Q.-x. Min et al., Recognition of contact interface defect in metal plate based on pulsed phase thermography, in: Prognostics and System Health Management Conference (PHM), IEEE, 2015.
Infrared Phys. Technol. Rodriguez-Martin 71 492 2015 10.1016/j.infrared.2015.06.013 Prediction of depth model for cracks in steel using infrared thermography
10.1109/CISTEM.2016.8066826 A. El-amiri, et al., Cracks detection in Mg-Zn (Y, Gd) magnesium alloy piston heads by pulsed thermography, in: International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), IEEE, 2016.
NDT & E Int. Loeb 82 44 2016 10.1016/j.ndteint.2016.04.005 Optimized inspection design for the thermographic characterization of sub-pixel sized through cracks
J. Nondestr. Eval. Pech-May 35 2 22 2016 10.1007/s10921-016-0344-x Fast characterization of the width of vertical cracks using pulsed laser spot infrared thermography
10.1109/CISTEM.2016.8066768 A. Saifi et al., A new model for determining the thermal effusivity of defects by pulsed thermography, in: International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), IEEE, 2016.
IEEE Sens. J. Zhao 17 17 5637 2017 10.1109/JSEN.2017.2723432 Crack evaluation based on novel circle-ferrite induction thermography
NDT & E Int. An 65 54 2014 10.1016/j.ndteint.2014.03.004 Laser lock-in thermography for detection of surface-breaking fatigue cracks on uncoated steel structures
Int. J. Fatigue De Finis 74 88 2015 10.1016/j.ijfatigue.2014.12.010 Fatigue limit evaluation of various martensitic stainless steels with new robust thermographic data analysis
Infrared Phys. Technol. Krstulovi-Opara 73 166 2015 10.1016/j.infrared.2015.09.014 Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials
Mater. Sci. Eng. A Torabian 677 97 2016 10.1016/j.msea.2016.09.025 Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading
Infrared Phys. Technol. Park 62 124 2014 10.1016/j.infrared.2013.10.006 A study on detection of micro-cracks in the dissimilar metal weld through ultrasound infrared thermography
Proc. Eng. Saravanan 86 469 2014 10.1016/j.proeng.2014.11.060 Non-destructive evaluation of friction stir welded joints by X-ray radiography and infrared thermography
Addit. Manuf. Seppala 12 71 2016 10.1016/j.addma.2016.06.007 Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
J. Mater. Process. Technol. Yang 244 215 2017 10.1016/j.jmatprotec.2017.01.024 Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography
10.1109/UKSim.2014.95 M.S. Jadin, K.H. Ghazali, Gas leakage detection using thermal imaging technique, in: UKSim-AMSS 16th International Conference on Computer Modelling and Simulation (UKSim), IEEE, 2014.
IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens. Bach 10 9 4210 2017 10.1109/JSTARS.2017.2708817 Reliability of infrared thermography in detecting leaks in buried water reticulation pipes
Infrared Phys. Technol. Meola 49 3 228 2007 10.1016/j.infrared.2006.06.010 Infrared thermography of masonry structures
Exp. Tech. Bhalla 35 4 39 2011 10.1111/j.1747-1567.2010.00658.x Defect detection in concrete structures using thermal imaging techniques
Infrared Phys. Technol. Grinzato 43 3 165 2002 10.1016/S1350-4495(02)00136-6 Monitoring of the Scrovegni Chapel by IR thermography: Giotto at infrared
J. Build. Eng. Wicker 20 201 2018 10.1016/j.jobe.2018.07.018 Detection of hidden corrosion in metal roofing shingles utilizing infrared thermography
Mater. Eval. Maldague 60 9 1060 2002 Introduction to NDT by active infrared thermography
ASTM, Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers.
ASTM, Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers.
ISO, Condition monitoring and diagnostics of machines - Thermography - Part 1: General procedures, in ISO 18434-1.
10.21611/qirt.1996.042 J.-C. Krapez, G. Gardette, D. Balageas, Thermal ellipsometry in steady-state and by lock-in thermography, Application to anisotropic materials characterization, OFFICE NATIONAL D ETUDES ET DE RECHERCHES AEROSPATIALES ONERA-PUBLICATIONS-TP, 1996.
Rev. Sci. Instrum. Cernuschi 72 10 3988 2001 10.1063/1.1400151 In-plane thermal diffusivity evaluation by infrared thermography
Quant. InfraRed Thermogr. J. Riegert 1 1 21 2004 10.3166/qirt.1.21-32 Lockin thermography with eddy current excitation
Rev. Sci. Instrum. Favro 71 6 2418 2000 10.1063/1.1150630 Infrared imaging of defects heated by a sonic pulse
10.21611/qirt.1992.024 G. Busse et al., Lockin vibrothermal inspection of polymer composites in: QIRT, 1992.
10.1007/978-1-4615-5947-4_45 A. Salerno et al., Thermographic inspection with ultrasonic excitation, in: Review of Progress in Quantitative Nondestructive Evaluation, Springer, 1997, pp. 345-352.
Infrared Phys. Technol. Cuccurullo 43 3-5 145 2002 10.1016/S1350-4495(02)00133-0 IR temperature measurements in microwave heating
Revue Generale de Thermique Osiander 37 8 680 1998 10.1016/S0035-3159(98)80046-9 Time-resolved infrared radiometry with step heating. A review
Trends Opt. Nondestruct. Testing Maldague 591 2000 Applications of infrared thermography in nondestructive evaluation
NDT & E Int. Shuohan 54 1 2013 10.1016/j.ndteint.2012.11.006 Applications of chirp z transform and multiple modulation zoom spectrum to pulse phase thermography inspection
Int. J. Thermophys. Suszyski 34 4 680 2013 10.1007/s10765-012-1297-7 Application of the correlation function in the detection of thermal heterogeneity using pulsed thermography
NDT & E Int. Tomi 60 132 2013 10.1016/j.ndteint.2013.08.001 Pulse thermography experimental data processing by numerically simulating thermal processes in a sample with periodical structure of defects
NDT & E Int. Lopez 66 128 2014 10.1016/j.ndteint.2014.06.003 Optimization of pulsed thermography inspection by partial least-squares regression
Infrared Phys. Technol. Zhang 64 18 2014 10.1016/j.infrared.2014.01.011 A novel compression algorithm for infrared thermal image sequence based on K-means method
Infrared Phys. Technol. Yousefi 85 163 2017 10.1016/j.infrared.2017.06.008 Comparative analysis on thermal non-destructive testing imagery applying Candid Covariance-Free Incremental Principal Component Thermography (CCIPCT)
NDT & E Int. Zhao 93 86 2018 10.1016/j.ndteint.2017.10.001 A confidence map based damage assessment approach using pulsed thermographic inspection
Infrared Phys. Technol. Dudzik 56 1 2013 10.1016/j.infrared.2012.08.006 Analysis of the accuracy of a neural algorithm for defect depth estimation using PCA processing from active thermography data
Infrared Phys. Technol. Dudzik 71 187 2015 10.1016/j.infrared.2015.03.003 Two-stage neural algorithm for defect detection and characterization uses an active thermography
10.1109/ICInfA.2017.8079012 R. Qian et al., Infrared nondestructive recognition of small subsurface defects using a SVM classifier, in: IEEE International Conference on Information and Automation (ICIA), IEEE, 2017.
Infrared Phys. Technol. Rajic 87 1 2017 10.1016/j.infrared.2017.09.019 An investigation of noise performance in optical lock-in thermography
Mech. Syst. Sig. Process. Xu 103 162 2018 10.1016/j.ymssp.2017.09.030 Improving defect visibility in square pulse thermography of metallic components using correlation analysis
Surf. Coat. Technol. Cernuschi 272 387 2015 10.1016/j.surfcoat.2015.03.036 Can TBC porosity be estimated by non-destructive infrared techniques? A theoretical and experimental analysis
Infrared Phys. Technol. Mezghani 76 393 2016 10.1016/j.infrared.2016.03.018 Evaluation of paint coating thickness variations based on pulsed Infrared thermography laser technique
Infrared Phys. Technol. Yang 75 26 2016 10.1016/j.infrared.2015.12.026 Optically and non-optically excited thermography for composites: a review
Mech. Syst. Sig. Process. Guo 58 218 2015 10.1016/j.ymssp.2014.12.011 Defect identification based on parameter estimation of histogram in ultrasonic IR thermography
10.1109/FENDT.2015.7398326 R. Yang et al., An investigation and review into microwave thermography for NDT and SHM, in: IEEE Far East NDT New Technology & Application Forum (FENDT), IEEE, 2015.
Proc. CIRP Guillebert 11 124 2013 10.1016/j.procir.2013.07.054 Development of a thermographic NDI system for service damage identification in inaccessible areas
Surf. Coat. Technol. Schweda 276 368 2015 10.1016/j.surfcoat.2015.06.046 Damage evolution of a thermal barrier coating system with 3-dimensional periodic interface roughness: effects of roughness depth, substrate creep strength and pre-oxidation
Carslaw 1959 1959 Conduction of Heat in Solids
Vavilov 239 1982 Research Techniques in Nondestructive Testing Theoretical and practical aspects of the thermal nondestructive testing of bonded structures
Appl. Phys. B Patel 43 1 9 1987 10.1007/BF00693966 Thermal-wave detection and characterisation of sub-surface defects
Maldague 2012 Nondestructive Evaluation of Materials by Infrared Thermography
10.1117/12.946141 J. Milne, W. Reynolds, The non-destructive evaluation of composites and other materials by thermal pulse video thermography, in: Thermosense VII: Thermal Infrared Sensing for Diagnostics and Control, International Society for Optics and Photonics, 1985.
J. Appl. Phys. Almond 111 9 093510 2012 10.1063/1.4704684 An analytical study of the pulsed thermography defect detection limit
J. Phys. D: Appl. Phys. Almond 27 5 1063 1994 10.1088/0022-3727/27/5/027 Defect sizing by transient thermography. I. An analytical treatment
Appl. Phys. Lett. Almond 62 25 3369 1993 10.1063/1.109074 Edge effects and a method of defect sizing for transient thermography
J. Heat Transf. Sun 128 4 329 2006 10.1115/1.2165211 Analysis of pulsed thermography methods for defect depth prediction
X. Maldague, Theory and practice of infrared technology for nondestructive testing, 2001.
Infrared Phys. Technol. Sirikham 86 1 2017 10.1016/j.infrared.2017.08.012 Determination of thermal wave reflection coefficient to better estimate defect depth using pulsed thermography
Le Journal de Physique Colloques Almond 44 C6 1983 10.1051/jphyscol:1983680 The potential value of photothermal imaging for the testing of plasma sprayed coatings
J. Appl. Phys. Lepoutre 57 4 1009 1985 10.1063/1.334540 Nondestructive control of weldings using the mirage detection
J. Appl. Phys. Mandelis 57 9 4421 1985 10.1063/1.334565 Theory of photopyroelectric spectroscopy of solids
J. Appl. Phys. Maldague 79 5 2694 1996 10.1063/1.362662 Pulse phase infrared thermography
10.1142/9789812770943_0014 C. Ibarra-Castanedo et al., Active infrared thermography techniques for the nondestructive testing of materials, in: Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization, World Scientific, 2007, pp. 325-348.
Bracewell vol. 31999 1986
J. Appl. Phys. BuSSe 71 8 3962 1992 10.1063/1.351366 Thermal wave imaging with phase sensitive modulated thermography
Sens. Mater. Charact. Process. Manuf., ASNT TONES Favro 1 399 1998 Thermal wave materials characterization and thermal wave imaging
Revue generale de thermique Wu 37 8 693 1998 10.1016/S0035-3159(98)80047-0 Lock-in thermography for nondestructive evaluation of materials
J. Nondestr. Eval. Spicer 8 2 107 1989 10.1007/BF00565635 Measurement of coating physical properties and detection of coating disbonds by time-resolved infrared radiometry
J. Maclachlan Spicer et al., Time-resolved infrared radiometry (TRIR) for characterization of impact damage in composite materials, 992.
J. Res. Nondestruct. Eval. Vavilov 9 4 181 1997 10.1080/09349849709414473 Thermal characterization of defects in building envelopes using long square pulse and slow thermal wave techniques
J. Compos. Mater. Badghaish 42 13 1337 2008 10.1177/0021998308092202 Non-destructive inspection of composites using step heating thermography
Infrared Phys. Technol. Grys 68 84 2015 10.1016/j.infrared.2014.11.005 Automated characterisation of subsurface defects by active IR thermographic testing-discussion of step heating duration and defect depth determination
10.21611/qirt.2002.004 M. Pilla et al., New absolute contrast for pulsed thermography, in: Proc. QIRT, 2002.
P. Potet, F. Lesbre, C. Bathias, Quantitative characterization of impact damage in composite materials-a comparison between computerized vibrothermography and X-ray tomography, in: H.L.M. dos Reis (Ed.), Nondestructive Testing and Evaluation for Manufacturing and Construction, 1989, pp. 95-105.
NDT & E Int. Maldague 6 29 396 1996 Nondestructive evaluation of materials by infrared thermography
Infrared Phys. Technol. Benitez 51 3 160 2008 10.1016/j.infrared.2007.01.001 Definition of a new thermal contrast and pulse correction for defect quantification in pulsed thermography
NDT & E Int. Vavilov 73 28 2015 10.1016/j.ndteint.2015.03.003 Review of pulsed thermal NDT: Physical principles, theory and data processing
S.M. Shepard, Temporal noise reduction, compression and analysis of thermographic image data sequences, US, 1999.
Opt. Eng. Shepard 42 5 1337 2003 10.1117/1.1566969 Reconstruction and enhancement of active thermographic image sequences
Infrared Phys. Technol. Ibarra-Castanedo 46 1-2 75 2004 10.1016/j.infrared.2004.03.011 Infrared image processing and data analysis
H.I. Ringermacher, R.J. Archacki Jr., W.A. Veronesi, Nondestructive testing: transient depth thermography, 1998, Google Patents.
Infrared Phys. Technol. Zeng 55 2-3 200 2012 10.1016/j.infrared.2012.01.005 Absolute peak slope time based thickness measurement using pulsed thermography
Polym. Test. Vavilov 44 224 2015 10.1016/j.polymertesting.2015.04.013 A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography
J. Sun, Method for determining defect depth using thermal imaging, Google Patents, 2003.
10.21611/qirt.2008.12_16_16 F. Madruga et al., Automatic data processing based on the skewness statistic parameter for subsurface defect detection by active infrared thermography, in: Proc. QIRT, Citeseer, 2008.
10.1117/12.818684 F.J. Madruga et al., Enhanced contrast detection of subsurface defects by pulsed infrared thermography based on the fourth order statistic moment, kurtosis, in: Thermosense XXXI, International Society for Optics and Photonics, 2009.
NDT & E Int. Madruga 43 8 661 2010 10.1016/j.ndteint.2010.07.002 Infrared thermography processing based on higher-order statistics
Compos. Struct. Rajic 58 4 521 2002 10.1016/S0263-8223(02)00161-7 Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures
10.21611/qirt.2006.002 K.E. Cramer, W.P. Winfree, The application of principal component analysis using fixed eigenvectors to the infrared thermographic inspection of the space shuttle thermal protection system, 2006.
Infrared Phys. Technol. Marinetti 46 1-2 85 2004 10.1016/j.infrared.2004.03.012 Statistical analysis of IR thermographic sequences by PCA
IEEE Sens. J. Cheng 14 5 1655 2014 10.1109/JSEN.2014.2301168 Impact damage detection and identification using eddy current pulsed thermography through integration of PCA and ICA
IBM J. Res. Dev. Samuel 3 3 210 1959 10.1147/rd.33.0210 Some studies in machine learning using the game of checkers
NDT & E Int. Saintey 30 5 291 1997 10.1016/S0963-8695(96)00071-0 An artificial neural network interpreter for transient thermography image data
NDT & E Int. Vallerand 33 5 307 2000 10.1016/S0963-8695(99)00056-0 Defect characterization in pulsed thermography: a statistical method compared with Kohonen and Perceptron neural networks
Adv. Opt. Technol. Balageas 2013 2013 10.1155/2013/314906 In search of early time: an original approach in the thermographic identification of thermophysical properties and defects
J. Nondestr. Eval. Giron 33 1 62 2014 New 3D finite difference method for thermal contrast enhancement in slabs pulsed thermography inspection
O. Ley, V. Godinez-Azcuaga, Line scanning thermography and its application inspecting aerospace composites, in: 5th International Symposium on NDT in Aerospace, Singapore Google Scholar, 2013.
NDT & E Int. Alvarez-Restrepo 91 9 2017 10.1016/j.ndteint.2017.05.003 Characterization of defects of pulsed thermography inspections by orthogonal polynomial decomposition
Infrared Phys. Technol. Duan 60 275 2013 10.1016/j.infrared.2013.05.009 Quantitative evaluation of optical lock-in and pulsed thermography for aluminum foam material
Infrared Phys. Technol. Ishikawa 57 42 2013 10.1016/j.infrared.2012.11.009 Detecting deeper defects using pulse phase thermography
Infrared Phys. Technol. Qingju 60 183 2013 10.1016/j.infrared.2013.05.004 Inspection on SiC coated carbon-carbon composite with subsurface defects using pulsed thermography
NDT & E Int. Waugh 66 52 2014 10.1016/j.ndteint.2014.04.002 Modelling and evaluation of pulsed and pulse phase thermography through application of composite and metallic case studies
Infrared Phys. Technol. Tao 72 210 2015 10.1016/j.infrared.2015.08.005 Determination of temperature sequence length in pulse phase thermography
10.1109/CCECE.2017.7946755 B. Yousefi et al., Automatic IRNDT inspection applying sparse PCA-based clustering, in: IEEE 30th Canadian Conference on Electrical and Computer Engineering (CCECE), IEEE, 2017.
Infrared Phys. Technol. Tang 68 173 2015 10.1016/j.infrared.2014.12.002 A new signal processing algorithm of pulsed infrared thermography
Optimization Eng. Peeters 19 1 163 2018 10.1007/s11081-017-9368-z Active thermography setup updating for NDE: a comparative study of regression techniques and optimisation routines with high contrast parameter influences for thermal problems
Polym. Test. Zheng 49 73 2016 10.1016/j.polymertesting.2015.11.009 Thermographic clustering analysis for defect detection in CFRP structures
Infrared Phys. Technol. Tang 77 144 2016 10.1016/j.infrared.2016.05.027 Quantitative detection of defects based on Markov-PCA-BP algorithm using pulsed infrared thermography technology
Exp. Mech. Pitarresi 55 4 667 2015 10.1007/s11340-013-9827-1 Lock-in signal post-processing techniques in infra-red thermography for materials structural evaluation
Infrared Phys. Technol. Jinlong 71 439 2015 10.1016/j.infrared.2015.06.005 Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography
Int. J. Thermophys. Liu 36 5-6 1259 2015 10.1007/s10765-015-1874-7 Study on lock-in thermography defect detectability for carbon-fiber-reinforced polymer (CFRP) sheet with subsurface defects
Exp. Mech. Siddiqui 55 7 1239 2015 10.1007/s11340-015-0019-z Infrared thermal wave imaging for nondestructive testing of fibre reinforced polymers
Proc. Eng. Antolis 188 471 2017 10.1016/j.proeng.2017.04.510 Optical lock-in thermography for structural health monitoring-a study into infrared detector performance
Infrared Phys. Technol. Chatterjee 82 75 2017 10.1016/j.infrared.2017.02.015 A novel pulse compression algorithm for frequency modulated active thermography using band-pass filter
Infrared Phys. Technol. Daryabor 79 58 2016 10.1016/j.infrared.2016.09.012 Comparison of three thermographic post processing methods for the assessment of a repaired aluminum plate with composite patch
Infrared Phys. Technol. Ghadermazi 72 204 2015 10.1016/j.infrared.2015.08.006 Delamination detection in glass-epoxy composites using step-phase thermography (SPT)
NDT & E Int. Wang 76 66 2015 10.1016/j.ndteint.2015.08.006 Using active thermography to inspect pin-hole defects in anti-reflective coating with k-mean clustering
API, Fitness-For-Service, in: API 579-1/ASME FFS-1, second ed., 2007.
Inverse Prob. Bryan 21 1 239 2004 10.1088/0266-5611/21/1/015 Reconstruction of an unknown boundary portion from Cauchy data in n dimensions
Inverse Prob. Bryan 14 6 1429 1998 10.1088/0266-5611/14/6/005 Stability and reconstruction for an inverse problem for the heat equation
M. Charnley, A. Rzeznik, Thermal Detection of Inaccessible Corrosion, 2012.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.