최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Diffusion and defect data. SSP. [Pt. B], Solid state phenomena, v.284, 2018년, pp.1230 - 1234
Maisuradze, Mikhail V. (Ural Federal University) , Kuklina, Alexandra A. (Ural Federal University)
The simplified algorithm of the numerical solution of the differential diffusion equation is presented. The solution is based on the one-dimensional diffusion model with the third kind boundary conditions and the finite difference method. The proposed approach allows for the quick and precise assess...
Y.-H. Yang, M.-Q. Wang, J.-C. Chen, H. Dong, Microstructure and Mechanical Properties of Gear Steels After High Temperature Carburization, J. Iron Steel Res. Int., 20 (2013) 140-145. 10.1016/s1006-706x(13)60227-7
S.N. Lingamanaik, B.K. Chen, The effects of carburising and quenching process on the formation of residual stresses in automotive gears, Comp. Mat. Sci., 62 (2012) 99-104. 10.1016/j.commatsci.2012.05.033
Z. Pang, S. Yu, J. Xu, Study of effect of quenching deformation influenced by 17CrNiMo6 gear shaft of carburization, Phys. Proc., 50 (2013) 103-112. 10.1016/j.phpro.2013.11.018
A.A. Walvekar, F. Sadeghi, Rolling contact fatigue of case carburized steels, Int. J. Fatig., 95 (2017) 264-281. 10.1016/j.ijfatigue.2016.11.003
T.M. Loganathan, J. Purbolaksono, J.I. Inayat-Hussain, N. Wahab, Effects of carburization on expected fatigue life of alloys steel shafts, Mater. Design, 32 (2011) 3544-3547. 10.1016/j.matdes.2011.02.004
N.R. Paulson, Z. Golmohammadi, A.A. Walvekar, F. Sadeghi, K. Mistry, Rolling contact fatigue in refurbished case carburized bearings, Tribol. Int., 115 (2017) 348-364. 10.1016/j.triboint.2017.05.026
B. Jo, S. Sharifimehr, Y. Shim, A. Fatemi, Cyclic deformation and fatigue behavior of carburized automotive gear steel and predictions including multiaxial stress states, Int. J. Fatig., 100 (2017) 454-465. 10.1016/j.ijfatigue.2016.12.023
E. Conrado, C. Gorla, P. Davoli, M. Boniardi, A comparison of bending fatigue strength of carburized and nitrided gears for industrial applications, Eng. Fail. Anal., 78 (2017) 41-54. 10.1016/j.engfailanal.2017.03.006
Ph. Jacquet, D.R. Rousse, G. Bernard, M. Lambertin, A novel technique to monitor carburizing processes, Mater. Chem. Phys., 77 (2002) 542-551. 10.1016/s0254-0584(02)00106-2
S.-J. Lee, D.K. Matlock, C.J. Van Tyne, An Empirical Model for Carbon Diffusion in Austenite Incorporating Alloying Element Effects, ISIJ Int., 51 (2011) 1903-(1911). 10.2355/isijinternational.51.1903
P. Cavaliere, G. Zavarise, M. Perillo, Modeling of the carburizing and nitriding processes, Comp. Mater. Sci., 46 (2009) 26-35. 10.1016/j.commatsci.2009.01.024
S.-J. Lee, D.K. Matlock, C.J. Van Tyne, Comparison of two finite element simulation codes used to model the carburizing of steel, Comp. Mater. Sci., 68 (2013) 47-54. 10.1016/j.commatsci.2012.10.007
D.-W. Kim, H.-H. Cho, W.-B. Lee, K.T. Cho, Y.-G. Cho, S.-J. Kim, H.N. Han, A finite element simulation for carburizing heat treatment of automotive gear ring incorporating transformation plasticity, Mater. Design, 99 (2016) 243-253. 10.1016/j.matdes.2016.03.047
D.S. Rong, J.M. Gong, Y. Jiang, Thermodynamic Simulation of Low Temperature Colossal Carburization of Austenitic Stainless Steel, Proc. Eng., 130 (2015) 676-684. 10.1016/j.proeng.2015.12.296
A. Sugianto, M. Narazaki, M. Kogawara, A. Shirayori, S.-Y. Kim, S. Kubota, Numerical simulation and experimental verification of carburizing-quenching process of SCr420H steel helical gear, J. Mater. Process. Technol., 209 (2009) 3597-3609. 10.1016/j.jmatprotec.2008.08.017
G.E. Totten, M.A.H. Howes (Eds.), Steel Heat Treatment Handbook, CRC Press, USA, (1997).
J.W. Thomas, Numerical Partial Differential Equations: Finite Difference Methods, Springer-Verlag New York, USA, (1995).
W. Gao, L. Kong, J.M. Long, P.D. Hodgson, Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces, J. Mater. Process. Technol., 209 (2009) 497-505. 10.1016/j.jmatprotec.2008.02.028
T. Holm, P. Olsson, E. Troell, Steel and its Heat Treatment: A Handbook, Swerea IVF, Stockholm, (2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.