참고문헌 (26)

1. Journal of Loss Prevention in the Process Industries A Aljaroudi 37 101 2015 10.1016/j.jlp.2015.07.004 Aljaroudi, A., Khan, F., Akinturk, A., Haddara, M., & Thodi, P. (2015). Risk assessment of offshore crude oil pipeline failure. Journal of Loss Prevention in the Process Industries, 37, 101-109. 

   상세보기

2. 10.1115/PVP2004-2915 Antaki, G. (2004). Seismic capacity of threaded, brazed and grooved clamped joints. In ASME PVP conference, San Diego, CA (pp. 135-145). 

   

3. ASME. (2004). Rule for construction of nuclear facility components, ASME boiler and pressure vessel code, section III, American Society of Mechanical Engineers (ASME). 

4. Ayers and Ezers 1996 Northridge earthquake hospital water damage study Ayers and Ezers. (1996). Northridge earthquake hospital water damage study. Sacramento, CA: Office of Statewide Health Planning and Development (OSHPD), Ayers & Ezers Associates, Inc. 

5. R Bachman 2004 Engineering demand parameters for nonstructural components Bachman, R., Bonowitz, D., Caldwell, P. J., Filiatrault, A., Kennedy, R. P., McGavin, G., et al. (2004). Engineering demand parameters for nonstructural components. Redwood City, CA: ATC-58 project task report-ATC. 

6. Journal of engineering for industry ASME WO Clinedinst 87 125 1965 10.1115/1.3670774 Clinedinst, W. O. (1965). Strength of threaded joints for steel pipe. Journal of engineering for industry ASME, 87, 125-136. 

   상세보기

7. Dow, J. (2010). Testing and analysis of iron and plastic T-joint in sprinkler systems, NEESR-GC: Simulation of the seismic performance of nonstructural systems. Available at: http://nees.org/site/oldness/filedir_2/REU2009_DOW_paper.pdf . 

8. FEMA 461. (2007). Interim testing protocols for determining the seismic performance characteristics of structural and nonstructural components. ATC, 201 Redwood, CA. 

9. Nuclear Engineering and Design A Gupta 235 2071 2005 10.1016/j.nucengdes.2005.05.013 Gupta, A., & Choi, B. (2005). Consideration of uncertainties in seismic analysis of coupled building piping system. Nuclear Engineering and Design, 235, 2071-2086. 

   상세보기

10. Probabilistic Engineering Mechanics HM Hwang 13 2 107 1998 10.1016/S0266-8920(97)00017-9 Hwang, H. M., & Huo, J. R. (1998). Seismic fragility analysis of electric substation equipment and structures. Probabilistic Engineering Mechanics, 13(2), 107-116. 

    상세보기

11. Disaster Advances BS Ju 6 4 59 2013 Ju, B. S., & Jung, W. Y. (2013). Seismic fragility evaluation of multi-branch piping systems installed in critical low-rise buildings. Disaster Advances, 6(4), 59-65. 

    상세보기

12. Structural Engineering and Mechanics, An Int’l Journal BS Ju 46 3 337 2013 10.12989/sem.2013.46.3.337 Ju, B. S., Jung, W. Y., & Ryu, Y. H. (2013). Seismic fragility evaluation of piping system installed in critical structures. Structural Engineering and Mechanics, An Int’l Journal, 46(3), 337-352. 

    상세보기

13. 10.1115/PVP2011-57958 Ju, B. S., Taninada, S. T., & Gupta, A. (2011). Fragility analysis of threaded T-joint connections in hospital piping systems. In Proceedings of the ASME PVP conference, Baltimore, MD. 

    

14. Earthquakes and Structures, An Int’l Journal WY Jung 9 3 563 2015 10.12989/eas.2015.9.3.563 Jung, W. Y., & Ju, B. S. (2015). Effect of MDOF structures’ optimal dampers on seismic fragility of piping. Earthquakes and Structures, An Int’l Journal, 9(3), 563-576. 

    상세보기

15. Nuclear Engineering and Design RP Kennedy 50 315 1980 10.1016/0029-5493(80)90203-4 Kennedy, R. P., Cornell, C. A., Campbell, R. D., Kaplan, S., & Perla, H. F. (1980). Probabilistic seismic safety study of an existing nuclear power plant. Nuclear Engineering and Design, 50, 315-338. 

    상세보기

16. Probabilistic Engineering Mechanics SH Kim 19 1-2 105 2004 10.1016/j.probengmech.2003.11.009 Kim, S. H., & Shinozuka, M. (2004). Development of fragility curves of bridges retrofitted by column jacketing. Probabilistic Engineering Mechanics, 19(1-2), 105-112. 

    상세보기

17. Kircher, C. A. (2003). It makes dollars and sense to improve nonstructural system performance. In: Proceedings of seminar on seismic design, performance, and retrofit of nonstructural components in critical facilities, ATC-29-2, Newport beach, CA. 

18. Mazzoni, S, McKenna, F, Scoot, M. H., & Fenves, G. L. (2006). OpenSees command language manual. Available at: http://opensees.berkeley.edu/ . 

19. NFPA-13 2007 Standard for the installation of sprinkler system NFPA-13. (2007). Standard for the installation of sprinkler system. Quincy, MA: National Fire Protection Association (NFPA). 

20. OpenSees. (2011). Open system for earthquake engineering simulation (OpenSees). Available at: heep://opensees.berkeley.edu/. 

21. Journal of Loss Prevention in the Process Industries M Parvini 37 110 2015 10.1016/j.jlp.2015.07.002 Parvini, M., & Gharagouzlou, E. (2015). Gas leakage consequence modeling for buried gas pipelines. Journal of Loss Prevention in the Process Industries, 37, 110-118. 

    상세보기

22. Porter, K., & Bachman, R. (2006). Developing fragility functions for building components for ATC-58, ATC-58 nonstructural products team. 

23. International Journal of Steel Structures YH Ryu 16 4 1043 2016 10.1007/s13296-016-0019-6 Ryu, Y. H., Gupta, A., Jung, W. Y., & Ju, B. S. (2016). A reconciliation of experimental and analytical results for piping system. International Journal of Steel Structures, 16(4), 1043-1055. 

    상세보기

24. 10.3801/IAFSS.FSS.7-309 Sekiazea, A., Ebihara, M., & Notake, H. (2003). Development of seismic-induced fire risk assessment method for a building. In Fire safety science-proceedings of the seventh international symposium (pp. 309-320). 

    

25. SMACNA. (2003). Seismic restraint manual guidelines for mechanical systems, sheet metal and air conditioning contractors’ national association, Inc. 

26. Tian Y, Fuchs J, Mosqueda G, Filiatrault A. 2010. NEESR Nonstructural: Progress report on tests of Tee Joint component of sprinkler piping system. Progress report, NEESR-GC: Simulation of the seismic performance of nonstructural systems.