최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Metals, v.8 no.11, 2018년, pp.953 -
Ku, Tae-Wan (Engineering Research Center of Innovative Technology on Advanced Forming, Pusan National University, Geumjeong-gu, Busan 46241, Korea)
A two-stage cold forging process was proposed to manufacture a drive shaft with an internal spline and spur gear geometries, and this process was mainly composed of a forward extrusion for preform and a forward-backward extrusion for the drive shaft. In the process design, the preform was designed u...
Zhang Effect of Variational Friction and Elastic Deformation of Die on Oscillating Cold Forging for Spline Shaft J. Mater. Process. Technol. 2017 10.1016/j.jmatprotec.2017.01.001 244 166
Chitkara Near-Net Shape Forging of a Crown Gear: Some Experimental Results and Analysis Int. J. Mach. Tools Manuf. 2001 10.1016/S0890-6955(00)00083-3 41 325
Jung A Study on the Extrusion by a Two-Step Process for Manufacturing Helical Gear Int. J. Adv. Manuf. Technol. 2009 10.1007/s00170-008-1518-1 41 684
Kamouneh Investigation of Work Hardening of Flat-Rolled Helical-Involute Gears through Grain-Flow Analysis, FE-Modeling, and Strain Signature Int. J. Mach. Tools Manuf. 2007 10.1016/j.ijmachtools.2006.08.014 47 1285
Kim Application of CAE in Cold Forging and Heat Treatment Processes for Manufacturing of Precision Helical Gear Part J. Mater. Process. Technol. 2008 10.1016/j.jmatprotec.2007.11.219 201 25
Maeno Use of Liquid Lubricant for Backward Extrusion of Cup with Internal Spline using Pulsating Motion J. Mater. Process. Technol. 2017 10.1016/j.jmatprotec.2017.02.001 244 273
Ku Process Simplification of Multi-Stage Forging for the Outer Race of a CV Joint Mater. Manuf. Process. 2014 10.1080/10426914.2013.792432 29 85
Ku Multi-Stage Cold Forging and Experimental Investigation for the Outer Race of Constant Velocity Joints Mater. Des. 2013 10.1016/j.matdes.2013.01.030 49 368
Lee New Processes to Prevent a Flow Defect in the Combined Forward-Backward Cold Extrusion on a Piston-Pin J. Mater. Process. Technol. 2013 10.1016/S0924-0136(03)00515-6 139 422
Schrader A Critical Evaluation of the Double Cup Extrusion Test for Selection of Cold Forging Lubricants J. Mater. Process. Technol. 2007 10.1016/j.jmatprotec.2006.11.229 189 36
Matsumoto Experimental and Numerical Analysis of Friction in High Aspect Ratio Combined Forward-Backward Extrusion with Retreat and Advanced Pulse Ram Motion on a Servo Press J. Mater. Process. Technol. 2014 10.1016/j.jmatprotec.2013.11.017 214 936
Ku Tool Design for Inner Race Cold Forging with Skew-Type Cross Ball Grooves J. Mater. Process. Technol. 2014 10.1016/j.jmatprotec.2014.02.021 214 1482
Ku Hardness-Controlled Tool Fabrication and Application to Cold Forging of Inner Race with Skewed Ball Grooves Int. J. Adv. Manuf. Technol. 2014 10.1007/s00170-014-6070-6 74 1337
Miyachika Hardened Layer and Bending Fatigue Strength of Induction Hardened Thermally Refined Steel Gears J. Adv. Mech. Des. Syst. Manuf. 2009 10.1299/jamdsm.3.136 3 136
Knust Preform Optimization for Hot Forging Processes using Genetic Algorithms Int. J. Adv. Manuf. Technol. 2017 10.1007/s00170-016-9209-9 89 1623
Sedighi A New Approach to Preform Design in Forging Process of Complex Parts J. Mater. Process. Technol. 2008 10.1016/j.jmatprotec.2007.06.043 197 314
10.3390/ma9080693 Yang, C.C., and Liu, C.L. (2016). Improvement of the Mechanical Properties of 1022 Carbon Steel Coil by using the Taguchi Method to Optimize Spheroidized Annealing Conditions. Materials, 9.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.