Luijendijk, Arjen P.
(Faculty of Civil Engineering and Geosciences, Department of Hydraulic Engineering, Delft University of Technology, P.O. Box 5048, 2600 GA Delft, The Netherlands)
,
de Schipper, Matthieu A.
(Faculty of Civil Engineering and Geosciences, Department of Hydraulic Engineering, Delft University of Technology, P.O. Box 5048, 2600 GA Delft, The Netherlands)
,
Ranasinghe, Roshanka
(Deltares, Unit Hydraulic Engineering, PO Box 177, 2600 MH Delft, The Netherlands)
Thirty one percent (31%) of the world’s coastline consists of sandy beaches and dunes that form a natural defense protecting the hinterland from flooding. A common measure to mitigate erosion along sandy beaches is the implementation of sand nourishments. The design and acceptance of such a mi...
Thirty one percent (31%) of the world’s coastline consists of sandy beaches and dunes that form a natural defense protecting the hinterland from flooding. A common measure to mitigate erosion along sandy beaches is the implementation of sand nourishments. The design and acceptance of such a mitigating measure require information on the expected evolution at time scales from storms to decades. Process-based morphodynamic models are increasingly applied, together with morphodynamic acceleration techniques, to obtain detailed information on this wide scale of ranges. This study shows that techniques for the acceleration of the morphological evolution can have a significant impact on the simulated evolution and dispersion of sandy interventions. A calibrated Delft3D model of the Sand Engine mega-nourishment is applied to compare different acceleration techniques, focusing on accuracy and computational times. Results show that acceleration techniques using representative (schematized) wave conditions are not capable of accurately reproducing the morphological response in the first two years. The best reproduction of the morphological behavior of the first five years is obtained by the brute force simulations. Applying input filtering and a compression factor provides similar accuracy yet with a factor five gain in computational cost. An attractive method for the medium to long time scales, which further reduces computational costs, is a method that uses representative wave conditions based on gross longshore transports, while showing similar results as the benchmark simulation. Erosional behavior is captured well in all considered techniques with variations in volumes of about 1 million m 3 after three decades. The spatio-temporal variability of the predicted alongshore and cross-shore distribution of the morphological evolution however have a strong dependency on the selected acceleration technique. A new technique, called ’brute force merged’, which incorporates the full variability of the wave climate, provides the optimal combination of phenomenological accuracy and computational efficiency (a factor of 20 faster than the benchmark brute force technique) at both the short and medium to long time scales. This approach, which combines realistic time series and the mormerge technique, provides an attractive and flexible method to efficiently predict the evolution of complex sandy interventions at time scales from hours to decades.
Thirty one percent (31%) of the world’s coastline consists of sandy beaches and dunes that form a natural defense protecting the hinterland from flooding. A common measure to mitigate erosion along sandy beaches is the implementation of sand nourishments. The design and acceptance of such a mitigating measure require information on the expected evolution at time scales from storms to decades. Process-based morphodynamic models are increasingly applied, together with morphodynamic acceleration techniques, to obtain detailed information on this wide scale of ranges. This study shows that techniques for the acceleration of the morphological evolution can have a significant impact on the simulated evolution and dispersion of sandy interventions. A calibrated Delft3D model of the Sand Engine mega-nourishment is applied to compare different acceleration techniques, focusing on accuracy and computational times. Results show that acceleration techniques using representative (schematized) wave conditions are not capable of accurately reproducing the morphological response in the first two years. The best reproduction of the morphological behavior of the first five years is obtained by the brute force simulations. Applying input filtering and a compression factor provides similar accuracy yet with a factor five gain in computational cost. An attractive method for the medium to long time scales, which further reduces computational costs, is a method that uses representative wave conditions based on gross longshore transports, while showing similar results as the benchmark simulation. Erosional behavior is captured well in all considered techniques with variations in volumes of about 1 million m 3 after three decades. The spatio-temporal variability of the predicted alongshore and cross-shore distribution of the morphological evolution however have a strong dependency on the selected acceleration technique. A new technique, called ’brute force merged’, which incorporates the full variability of the wave climate, provides the optimal combination of phenomenological accuracy and computational efficiency (a factor of 20 faster than the benchmark brute force technique) at both the short and medium to long time scales. This approach, which combines realistic time series and the mormerge technique, provides an attractive and flexible method to efficiently predict the evolution of complex sandy interventions at time scales from hours to decades.
참고문헌 (42)
Luijendijk The State of the World’s Beaches Sci. Rep. 2018 8 2045
Karunarathna Multi-timescale morphological modelling of a dune-fronted sandy beach Coast. Eng. 2018 10.1016/j.coastaleng.2018.03.005 136 161
Pelnard-Considère, R. (1956). Essai de théorie de l’évolution des formes de rivage en plages de sable et de galets. 4th Journées de l’Hydraulique, Les Énergies de la Mer, Question III, Société Hydrotechnique de. Rapport No. 1;.
Larson Analytical Solutions of One-Line Model for Shoreline Change near Coastal Structures J. Waterw. Port, Coast. Ocean Eng. 1997 10.1061/(ASCE)0733-950X(1997)123:4(180) 123 180
Elias, E. (2006). Morphodynamics of Texel Inlet. [Ph.D. Thesis, Delft University of Technology, Faculty of Civil Engineering and Geosciences].
Lesser, G. (2009). An Approach to Medium-Term Coastal Morphological Modelling. [Ph.D. Thesis, IHE Delft and Delft University of Technology].
10.2523/12729-MS Miller, J.K., Sun, T., Li, H., Stewart, J., Genty, C., Li, D., and Lyttle, C. (2008, January 3-5). Direct Modeling of Reservoirs through Forward Process-based Models: Can We Get There?. Proceedings of the International Petroleum Technology Conference, Kuala Lumpur, Malaysia.
Walstra Input reduction for long-term morphodynamic simulations in wave-dominated coastal settings Coast. Eng. 2013 10.1016/j.coastaleng.2013.02.001 77 57
Vitousek A model integrating longshore and cross-shore processes for predicting long-term shoreline response to climate change J. Geophys. Res. Earth Surf. 2017 10.1002/2016JF004065 122 782
10.1016/j.advwatres.2018.05.002 Carraro, F., Vanzo, D., Caleffi, V., Valiani, A., and Siviglia, A. (2018). Mathematical study of linear morphodynamic acceleration and derivation of the MASSPEED approach. Adv. Water Resour., 117.
Li On the upscaling of process-based models in deltaic applications Geomorphology 2018 10.1016/j.geomorph.2017.10.015 304 201
Nahon Process-based 2DH morphodynamic modeling of tidal inlets: A comparison with empirical classifications and theories Mar. Geol. 2012 10.1016/j.margeo.2011.10.001 291-294 1
Stive Cross-sectional stability of tidal inlets: A comparison between numerical and empirical approaches Coast. Eng. 2011 60 21
Storms Can bed load transport drive varying depositional behaviour in river delta environments? Sediment. Geol. 2016 10.1016/j.sedgeo.2016.08.009 345 19
Luijendijk The initial morphological response of the Sand Engine: A process-based modelling study Coast. Eng. 2017 10.1016/j.coastaleng.2016.09.005 119 1
Grunnet Morphodynamic response of nearshore bars to a shoreface nourishment Coast. Eng. 2005 10.1016/j.coastaleng.2004.09.006 52 119
Benedet A morphological modeling study to compare different methods of wave climate schematization and evaluate strategies to reduce erosion losses from a beach nourishment project Coast. Eng. 2016 10.1016/j.coastaleng.2016.02.005 112 69
Tonnon, P.K., van der Werf, J., and Mulder, J.P.M. (2009). Morphological Calculations for the EIA of the Sand Engine, Deltares. Technical Report.
Dhastgheib, A. (2012). Long-Term Process-Based Morphological Modelling of Large Tidal Basins. [Ph.D. Thesis, IHE Delft].
Mol, A.C.S. (2007). Schematization of Boundary Conditions for Morphological Simulations, WL|Delft Hydraulics. Technical Report.
10.1029/2011JF002177 Van den Berg, N., Falqués, A., and Ribas, F. (2012). Modeling large scale shoreline sand waves under oblique wave incidence. J. Geophys. Res. Earth Surf., 117.
Stive A New Alternative to Saving Our Beaches from Sea-Level Rise: The Sand Engine J. Coast. Res. 2013 10.2112/JCOASTRES-D-13-00070.1 29 1001
Ruessink Initial spreading of a mega feeder nourishment: Observations of the Sand Engine pilot project Coast. Eng. 2016 10.1016/j.coastaleng.2015.10.011 111 23
Wijnberg Environmental controls on decadal morphologic behaviour of the Holland coast Mar. Geol. 2002 10.1016/S0025-3227(02)00480-2 189 227
10.1142/9789814689977_0023 Luijendijk, A.P., Huisman, B., and De Schipper, M. (2015, January 11-15). Impact of a storm on the first year evolution of the Sand Engine. Proceedings of the Coastal Sediments, San Diego, CA, USA.
Zijl Improved water-level forecasting for the Northwest European Shelf and North Sea through direct modelling of tide, surge and non-linear interaction Ocean Dyn. 2013 10.1007/s10236-013-0624-2 63 823
Sutherland Evaluation of coastal area modelling systems at an estuary mouth Coast. Eng. 2004 10.1016/j.coastaleng.2003.12.003 51 119
※ AI-Helper는 부적절한 답변을 할 수 있습니다.