최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied thermal engineering, v.155, 2019년, pp.185 - 195
Darcovich, K. (National Research Council of Canada, Energy, Mining and Environment Research Centre) , MacNeil, D.D. (National Research Council of Canada, Energy, Mining and Environment Research Centre) , Recoskie, S. (National Research Council of Canada, Energy, Mining and Environment Research Centre) , Cadic, Q. (ICAM-Toulouse) , Ilinca, F. (National Research Council of Canada, Automotive and Surface Transportation Research Centre)
Abstract A numerical simulation was developed combining micro and macro scale models, to determine the thermal state of battery packs in electric vehicles. A spatially resolved Ohm’s law model was integrated with the single particle model to resolve the electrochemistry in prismatic cells, an...
Renew. Sustain. Energy Rev. Hannan 29 135 2014 10.1016/j.rser.2013.08.097 Hybrid electric vehicles and their challenges: a review
IEEE Trans. Power Electron. Yilmaz 28 5 2151 2013 10.1109/TPEL.2012.2212917 Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles
J. Power Sources Barre 241 680 2013 10.1016/j.jpowsour.2013.05.040 A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
J. Power Sources Lu 226 272 2013 10.1016/j.jpowsour.2012.10.060 A review on the key issues for lithium-ion battery management in electric vehicles
Appl. Therm. Eng. Darcovich 133 566 2018 10.1016/j.applthermaleng.2018.01.094 Coupled electrochemical and thermal battery models for thermal management of prismatic automotive cells
J. Electrochem. Energy Convers. Storage Darcovich 15 2 021004-1 2018 10.1115/1.4038631 Coupled numerical approach for automotive battery pack lifetime estimates with thermal management
Appl. Therm. Eng. Kim 149 192 2019 10.1016/j.applthermaleng.2018.12.020 Review on battery thermal management system for electric vehicles
J. Power Sources Jarrett 196 10359 2011 10.1016/j.jpowsour.2011.06.090 Design optimization of electric vehicle battery cooling plates for thermal performance
SAE Int. J. Alt. Powertrains Teng 1 2 525 2012 10.4271/2012-01-2017 Design of direct and indirect liquid cooling systems for high-capacity, high-power lithium-ion battery packs
Int. J. Heat Mass Transf. Panchal 109 1239 2017 10.1016/j.ijheatmasstransfer.2017.03.005 Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery
Int. J. Heat Mass Transf. Panchal 135 368 2019 10.1016/j.ijheatmasstransfer.2019.01.076 Heat and mass transfer modeling and investigation of multiple LiFePO4/graphite batteries in a pack at low C-rates with water-cooling
J. Power Sources Jarrett 245 644 2014 10.1016/j.jpowsour.2013.06.114 Influence of operating conditions on the optimum design of electric vehicle battery cooling plates
J. Power Sources Sun 206 349 2012 10.1016/j.jpowsour.2012.01.081 Three-dimensional thermal modeling of a lithium-ion battery pack
Appl. Therm. Eng. Moradikazerouni 150 1078 2019 10.1016/j.applthermaleng.2019.01.051 Comparison of the effect of five different entrance channel shapes of a micro-channel heat sink in forced convection with application to cooling a supercomputer circuit board
Appl. Therm. Eng. Li 147 829 2019 10.1016/j.applthermaleng.2018.11.009 Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate
Int. J. Therm. Sci. Tong 94 259 2015 10.1016/j.ijthermalsci.2015.03.005 Numerical investigation of water cooling for a lithium-ion bipolar battery pack
Appl. Therm. Eng. Wang 151 475 2019 10.1016/j.applthermaleng.2019.02.036 Sensitivity analysis of factors influencing a heat pipe-based thermal management system for a battery module with cylindrical cells
Appl. Energy Basu 181 1 2016 10.1016/j.apenergy.2016.08.049 Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system
Appl. Therm. Eng. Malik 129 472 2018 10.1016/j.applthermaleng.2017.10.029 Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling
D.R. Weber, R.M. Brisbane, Cooling plate for lithium-ion battery pack, US Patent US 2015/0044523 A1, 12 February 2015, 9 pp.
N. Bachmann, J. Meintschel, D. Schroter, Battery (e.g. high-power or high-voltage batteries) has cooling device and intermediate frame that are connected with output conductor of individual battery cells, German Patent DE 10 2012 018113 A1, 13 March 2014, 14 pp.
B. Boddakayala, Cooling system for vehicle batteries, US Patent US 2013/0183555 A1, 18 July 2013, 16 pp.
S Nicholls, Vehicle battery pack, a system for cooling a battery pack and a cooling plate for use in the system, US Patent US 2015/0140366 A1, 21 May 2015, 30 pp.
A. Betz, J. Helber, G. Johanntokrax, F. Maier, M. Meier, N Winterholler, Floor plate for a battery, in particular a traction battery, and the traction battery, German Patent DE 10 2016 008110 A1, 23 February 2017, 10 pp.
K. Smith, E. Wood, S. Santhanagopalan, G.-H. Kim, A. Pesaran, Advanced Models and Controls for Prediction and Extension of Battery Lifetime. Advanced Automotive Battery Conference, Atlanta, GA, USA, February 4-6, 2014.
Energy Policy Lunz 46 511 2012 10.1016/j.enpol.2012.04.017 Influence of plug-in hybrid electric vehicle charging strategies on charging and battery degradation costs
J. Power Sources Peterson 195 8 2385 2010 10.1016/j.jpowsour.2009.10.010 Lithium-ion battery cell degradation resulting from realistic vehicle and vehicle-to-grid utilization
Appl. Therm. Eng. Darcovich 114 1515 2017 10.1016/j.applthermaleng.2016.07.002 Effect on battery life of vehicle-to-home electric power provision under Canadian residential electrical demand
J. Electrochem. Soc. Ning 151 A1584 2004 10.1149/1.1787631 Cycle life modeling of lithium-ion batteries
J. Power Sources Rahimian 196 20 8450 2011 10.1016/j.jpowsour.2011.06.007 Comparison of single particle and equivalent circuit analog models for a lithium-ion cell
J. Power Sources Rahimian 196 10297 2011 10.1016/j.jpowsour.2011.07.019 Optimal charge rates for a lithium ion cell
J. Electrochem. Soc. Guo 158 A122 2011 10.1149/1.3521314 Single-particle model for a lithium-ion cell: thermal behavior
J. Electrochem. Soc. Doyle 143 1890 1996 10.1149/1.1836921 Comparison of modeling predictions with experimental data from plastic lithium ion cells
J. Power Sources Kwon 163 1 151 2006 10.1016/j.jpowsour.2006.03.012 A two-dimensional modeling of a lithium-polymer battery
J. Power Sources Kim 180 2 909 2008 10.1016/j.jpowsour.2007.09.054 Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
J. Power Sources Kim 189 1 841 2009 10.1016/j.jpowsour.2008.10.019 Modeling for the scale-up of a lithium-ion polymer battery
J. Power Sources Kim 196 11 5115 2011 10.1016/j.jpowsour.2011.01.103 Modelling the thermal behaviour of a lithium-ion battery during charge
J. Electrochem. Soc. Valoen 152 5 A882 2005 10.1149/1.1872737 Transport properties of LiPF6-based Li-ion battery electrolytes
J. Power Sources Kenney 213 391 2012 10.1016/j.jpowsour.2012.03.065 Modelling the impact of variations in electrode manufacturing on lithium-ion battery modules
J. Electrochem. Soc. Kumaresan 155 2 A164 2008 10.1149/1.2817888 Thermal model for a Li-ion cell
J. Power Sources Wu 243 544 2013 10.1016/j.jpowsour.2013.05.164 Coupled thermalel ectrochemical modelling of uneven heat generation in lithium-ion battery packs
ECS Trans. Li 64 33 1 2015 10.1149/06433.0001ecst Physics-based CFD simulation of lithium-ion battery under the FUDS driving cycle
J. Electrochem. Soc. Yi 160 3 A437 2013 10.1149/2.039303jes Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire
F. Cverna (Ed.), ASM ready reference: thermal properties of metals, ASM International, 2002, p. 560.
I.T. Yun, L.G. Chem, Product Specification, Rechargeable Lithium Ion Battery, Model: ICR18650S2 2200mA, January 2003, 8 pp.
F.R. Kalhammer, B.M. Kopf, D.H. Swan, V.P. Roan, M.P. Walsh, Status and prospects for zero emissions vehicle technology, Report of the ARB Independent Expert Panel, State of California Air Resources Board, 2007, 207 pp.
T. Maric, J. Hopken, K. Mooney, The OpenFOAM technology primer, Sourceflux Publ., Duisburg, 2014, pp. 455.
https://www.epa.gov/vehicle-and-fuel-emissions-testing, update of March 24, 2016.
J. Power Sources Xu 240 33 2013 10.1016/j.jpowsour.2013.03.004 Research on the heat dissipation performance of battery pack based on forced air cooling
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.