$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

강-콘크리트 양개형 방폭문의 강재량 결정을 위한 설계 민감도 분석
Design Sensitivity Analysis of a Steel-concrete Double-leaf Blast-resistant Door to Determine the Steel Ratio 원문보기

한국방재학회논문집 = Journal of the Korean Society of Hazard Mitigation, v.19 no.4, 2019년, pp.165 - 177  

신현섭 (한국건설기술연구원 인프라안전연구본부) ,  김원우 (한국건설기술연구원 인프라안전연구본부) ,  김성욱 (한국건설기술연구원 인프라안전연구본부) ,  문재흠 (한국건설기술연구원 인프라안전연구본부)

초록
AI-Helper 아이콘AI-Helper

방폭문은 방호 및 대피 구조물의 출입구에 설치되는 구조체로서 폭발물로부터 발생하는 폭발압에 대해 인명, 중요 설비 및 자재 등을 보호하는 기능을 한다. 본 논문에서는 강-콘크리트 양개형 방폭문을 대상으로 철근량 및 강박스 강판두께에 따른 처짐, 흡수에너지, 부재응력 등의 변화를 비교 검토함으로써 휨성능에 대한 설계 민감도를 분석하였다. 해석결과에 따르면, 철근량에 따른 구조성능의 변화는 크지 않으나 강재박스 강판두께가 변할 경우 최대처짐이 26% 이상 차이가 나는 것으로 나타나서 강박스를 단순히 거푸집 용도로 사용하는 것 보다 방폭에 주요 변수로 작용하는 구조체로 보고 설계하는 것이 효과적인 것으로 분석되었다. 적정 강판두께는 10 mm이고, 배근은 D10 철근을 적용하는 것이 효율적인 것으로 나타났다. 또한, 힌지 및 렛치와 같은 지지부재의 경우 문 자체의 보강 수준이 높을수록 단면성능이 향상되어야 하는 것으로 검토되었다.

Abstract AI-Helper 아이콘AI-Helper

Blast-resistant doors are application-specific structures that are installed at the entrances of protective facilities and used to protect lives, important equipment, and critical materials from blast pressure. In this study, based on flexural performance, the design sensitivity of a steel-concrete ...

주제어

참고문헌 (61)

  1. Modeling and simulation of bogie impacts on concrete bridge rails using LS-DYNA Abu-Odeh 3 2008 

  2. Design and analysis of single plate blast resistant door Aitavade 107 2013 

  3. 10.21236/ADA419496 

  4. 1985 

  5. 1997 

  6. Brannon 2009 

  7. Brode, Harold L.. Numerical Solutions of Spherical Blast Waves. Journal of applied physics, vol.26, no.6, 766-775.

  8. Blast load and design of protective structures Byun 16 2011 

  9. Chen, Wensu, Hao, Hong. Numerical study of a new multi-arch double-layered blast-resistance door panel. International journal of impact engineering, vol.43, 16-28.

  10. Chen, Wensu, Hao, Hong. Numerical Simulations of Stiffened Multi-Arch Double-Layered Panels Subjected to Blast Loading. International journal of protective structures, vol.4, no.2, 163-187.

  11. 최호순, 김민숙, 이영학. 주철근의 개수 및 단면비에 따른 폭발하중을 받는 철근콘크리트 기둥의 해석적 연구. 한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, vol.25, no.3, 219-226.

  12. Fracture estimation of stiffened plates under impact loading using micromechanics plasticity model Choung 1607 2008 

  13. Theoretical backgrounds of strain hardening and rate hardening of a marine structural steel Choung 1393 2011 

  14. Influencing factors on numerical simulation of crash between RC slab and soft projectile Chung 591 2011 

  15. Crawford 2012 

  16. Dharmasena, K.P., Wadley, H.N.G., Xue, Z., Hutchinson, J.W.. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading. International journal of impact engineering, vol.35, no.9, 1063-1074.

  17. Investigation on the blast resistance of a stiffened door structure Hsieh 149 2008 

  18. Evaluation on the blast resistant performance of fiber reinforced mortar with fiber type and PVA+STF panel installed intermediate space thickness Hwang 115 2012 

  19. 2018 

  20. Stress analysis on the profile of blast wall with finite element method Kim 130 2012 

  21. Analysis techniques of blast resistance concrete structures and concrete material model Kim 30 2011 

  22. Strengthening effect of CFRP sheets and steel fibers for enhancing the impact resistance of RC beams Kim 41 2011 

  23. A study on the structural stability of the sliding blast door under blast load Kim 2015 

  24. 김남혁, 박관진, 이근오. 폭압에 의한 방폭문의 구조적 안정성에 대한 연구. 한국안전학회지 = Journal of the Korean Society of Safety, vol.31, no.3, 8-15.

  25. Kim 2016 

  26. 김상진, 손정민, 이종찬, 리춘보, 성동진, 백점기. 폭발 하중을 받는 보강된 방폭벽의 동적 구조 응답 특성에 관한 연구. 大韓造船學會 論文集 = Journal of the society of naval architects of korea, vol.51, no.5, 380-387.

  27. Protective design and blast resistant structures Kim 12 2011 

  28. 10.1155/2003/357969 

  29. Krautthammer 2011 

  30. Blast response evaluation of steel structures due to the boundary conditions Lee 43 2007 

  31. 임광모, 이주하. 슬래브-기둥 접합부의 구속도 및 드롭패널에 따른 방폭 성능 평가. 대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, vol.37, no.2, 451-457.

  32. 2017 

  33. Dynamic FEA and simulation for A series of blast-resist-door Lu 839 2002 

  34. Luo, X., Qian, X., Zhao, H., Huang, P.. Simulation Analysis on Structure Safety of Refuge Chamber Door Under Explosion Load. Procedia engineering, vol.45, 923-929.

  35. Review of strain rate effects for concrete in tension Malvar 735 1998 

  36. Malvar, L.Javier, Crawford, John E., Wesevich, James W., Simons, Don. A plasticity concrete material model for DYNA3D. International journal of impact engineering, vol.19, no.9, 847-873.

  37. Investigation and calibration of constitutive models of concrete Markovich 2009 

  38. Calibration of a concrete damage material model in LS-Dyna for a wide range of concrete strengths Markovich 2009 

  39. Meng, F., Zhang, B., Zhao, Z., Xu, Y., Fan, H., Jin, F.. A novel all-composite blast-resistant door structure with hierarchical stiffeners. Composite structures, vol.148, 113-126.

  40. The design of concrete structure to resist explosions and weapon effects Mills 61 1987 

  41. 1998 

  42. 2008 

  43. 2011 

  44. 2018 

  45. Blast analysis of RC wall structure using high strain rate dependent concrete damage model and non-uniform peak pressure distribution model Nam 2007 

  46. HFPB analysis of concrete wall structure subjected to blast loads Nam 433 2007 

  47. A study on the standards and utilization plan of CBR facilities 2008 

  48. Design of blast resistant structures Newmark 1961 

  49. A study on the estimation of blast load and the design of a blast resistant door Oh 1998 

  50. A study on protective Criteria and Explosion safety evaluation of shelter Park 2008 

  51. Development of a blast protective design method for steel panels with strain-rate effects Park 2014 

  52. Effects of strain rate on concrete strength Ross 37 1995 

  53. High-mass, low-velocity impacts on reinforced concrete slabs Sangi 2009 

  54. Performance evaluation and structural proposal of sliding door under explosive load Shim 24 2018 

  55. 신진원, 김진규. 고폭탄물의 근접폭발이 폭발압력과 충격량에 미치는 효과. 한국방재학회논문집 = Journal of the Korean Society of Hazard Mitigation, vol.16, no.6, 21-28.

  56. 손성곤, 박민재, 류재호, 주영규. 기둥 보강용 PROTECT 방폭 패널의 충격저항성능. 大韓建築學會論文集. Journal of the architectural institute of korea. 構造系, vol.33, no.2, 3-10.

  57. Tavakoli, H.R., Kiakojouri, F.. Numerical dynamic analysis of stiffened plates under blast loading. Latin american journal of solids and structures, vol.11, no.2, 185-199.

  58. 2008 

  59. Veeredhi, Lakshmi Shireen Banu, Ramana Rao, N. V.. Studies on the Impact of Explosion on Blast Resistant Stiffened Door Structures. Journal of the Institution of Engineers (India). Series A : Civil, Architectural, Environmental and Agricultural Engineering, vol.96, no.1, 11-20.

  60. Behavior analysis of concrete structure under blast loading: (II) Blast loading response of ultra high strength concrete and reactive powder concrete slabs Yi 565 2009 

  61. Zhao, Zheng, Zhang, Bei, Zhou, Jiannan, Chen, Hailong, Wang, Bo, Zhou, Yinzhi, Xu, Ying, Jin, Fengnian, Fan, Hualin. Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound (SMC) protective door structures. Engineering structures, vol.168, 431-446.

LOADING...
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로